[ANN] Multicurrencies | Test Net Live | Unmoderated

[brother3]

A serious error, the client will now close.
EXECEPTION: st13runtime -error
CDBO: can not open database file, error 1
E; \ BRO \ BREAKOUTCOIN-1.2.2.0-WIN32 \ Breakoutcoin-1.2.2.0win32 \ Breakoutcoin.exe in RUnaway exception



Open their wallets so I was WIN7 64 位??

I have been running wallet on Win 7 64 bit for a little more than 3 weeks now without issues.   I tried to stop the client a few times and re-ran it just to see... Wallet is stable (I am currently on 1.2.2.0 like you).

Is this the first time you started the wallet?  If yes, try to run it again.

If wallet still won't start, then go into your breakout folder --> Users/YOUR_USER_NAME/AppData/Roaming/Breakout/testnet and delete verything BUT keep the wallet.dat file

Go to https://github.com/multicurrency/Breakout-Releases , download the bootstrap, unzip it and put the resulting file in the same testnet folder (this will help speed up the syncing process)

Restart the wallet client and wait for it to sync up

I highly recommend joining our channel in Slack, where help should be more personal and timely....

Over and out...

[lujunqing7890]

I tried many times, and the installation and testing in the 2 computers which can not be synchronized.

[MR1]

A serious error, the client will now close.
EXECEPTION: st13runtime -error
CDBO: can not open database file, error 1
E; \ BRO \ BREAKOUTCOIN-1.2.2.0-WIN32 \ Breakoutcoin-1.2.2.0win32 \ Breakoutcoin.exe in RUnaway exception



Open their wallets so I was WIN7 64 位??

Try this method:

1. Close your Breakoutclient.
2. Go to C:\Documents and Settings\Username\AppData\BreakoutCoin\testnet
3. Then delete: "database"*full folder, "txleveldb"*full folder, "blk0001.dat"*file, "debug.log"*you will find that it's huge 1GB+ for no reason
4. Now download bootstrap.dat.zip from here https://github.com/multicurrency/Breakout-Releases/ and unzip it to ~BreakoutCoin\testnet folder
5. You can launch Breakout client now. It may hang, after load, but it's OK, give it time.

[lujunqing7890]

Thanks for guidance. After you remove the wallet file reinstall 1.2.2 version, so you can open the wallet for the first time, but the second would not open, and when prompted, display problems can not be opened, it closed. Delete wallet file, first open the 24 hours can not be synchronized, has been connected, I do not know what reason. My two computers were the case.

[brother3]

Thanks for guidance. After you remove the wallet file reinstall 1.2.2 version, so you can open the wallet for the first time, but the second would not open, and when prompted, display problems can not be opened, it closed. Delete wallet file, first open the 24 hours can not be synchronized, has been connected, I do not know what reason. My two computers were the case.

May be I can help you troubleshoot via TeamViewer.  A word of caution, this means granting me the power to access your computer remotely, and that you must be really careful with...

[lujunqing7890]

My computer has dozens purse, NXT, BTC, PPC, DASH, NBT, XCR, BAY, BBR, BLOCK, XTC, VPN, SYS, etc., etc., these wallets installation BRO there is no problem,,, problem. . . My computer will not be problem,,, BRO wallet is convenient enough, or too bad my technique.

[brother3]

My computer has dozens purse, NXT, BTC, PPC, DASH, NBT, XCR, BAY, BBR, BLOCK, XTC, VPN, SYS, etc., etc., these wallets installation BRO there is no problem,,, problem. . . My computer will not be problem,,, BRO wallet is convenient enough, or too bad my technique.

Since you have all of those wallets on that computer, I am afraid I can't help you with TeamViewer.  It frustrates me not being able to figure out what's wrong....  I have stopped my wallet on purpose many times and re-ran with no issues whatsoever (and wallet always sync).

[multicurrency]

Testnet Distribution Dry Run: Version 1.2.3.0 Upgrade

The testnet distribution dry run is live and requires the new 1.2.3.0 client.

1. Go here and download the latest client:
https://github.com/multicurrency/Breakout-Releases/blob/master/README.md

2. To get your first coin sale testnet coins, open your client, let it sync, then select "File->Import Encrypted Wallet Key" (or similar). See first pic below. The chain is long because of short block times for the test net. It will take a few minutes to import your keys as it scans for transactions. Be patient.

3. If you are staking like crazy, you can see the coins you were sent in the "Transactions" tab and choose the "Received With" filter (right pull down filter, see second pic).

4. Balances from the first coin sale are at http://chain.breakoutcoin.com/balances/. These balances do not reflect the 20% bonus.

5. The amounts you get for the dry run reflect the 20% bonus, and come in two transactions: (a) the face-value amount you purchased in the first coin sale and (b) the 20% bonus on top of your purchase.

[multicurrency]

Thanks for guidance. After you remove the wallet file reinstall 1.2.2 version, so you can open the wallet for the first time, but the second would not open, and when prompted, display problems can not be opened, it closed. Delete wallet file, first open the 24 hours can not be synchronized, has been connected, I do not know what reason. My two computers were the case.

Tor is likely blocked where you are. The testnet client is Tor only. The main net client will have a Tor-clear net bridge.

[LovSan]

Testnet Distribution Dry Run: Version 1.2.3.0 Upgrade

The testnet distribution dry run is live and requires the new 1.2.3.0 client.

1. Go here and download the latest client:
https://github.com/multicurrency/Breakout-Releases/blob/master/README.md

2. To get your first coin sale testnet coins, open your client, let it sync, then select "File->Import Encrypted Wallet Key" (or similar). See first pic below. The chain is long because of short block times for the test net. It will take a few minutes to import your keys as it scans for transactions. Be patient.

3. If you are staking like crazy, you can see the coins you were sent in the "Transactions" tab and choose the "Received With" filter (right pull down filter, see second pic).

4. Balances from the first coin sale are at [url]http://chain.breakoutcoin.com/balances/[url]. These balances do not reflect the 20% bonus.

5. The amounts you get for the dry run reflect the 20% bonus, and come in two transactions: (a) the face-value amount you purchased in the first coin sale and (b) the 20% bonus on top of your purchase.

It took way more than a few minutes and in the end (after notification that the key was imported successfully) client just stuck unresponsive, left it for a few hours, but it didn't help. Then as last resort I terminated its process and restarted, now it works and I see ICO transaction+20%.
'Mock test'

[casper77]

what if i don't have encrypted wallet key in .json format ? i have only public&private keys.

[LovSan]

what if i don't have encrypted wallet key in .json format ? i have only public&private keys.

Open breakout client console and give a try to this command:

Code:

importprivkey <breakoutprivkey> [label] [ticker]

[multicurrency]

It took way more than a few minutes and in the end (after notification that the key was imported successfully) client just stuck unresponsive, left it for a few hours, but it didn't help. Then as last resort I terminated its process and restarted, now it works and I see ICO transaction+20%.
'Mock test'

The client's sticking seems to be due to my using a modal Qt dialog box to get the passphrase. Nothing in the documentation suggests that I am doing it wrong, but Qt is full of strange platform dependent quirks. This one pops up on Mac and Windows, but I have never seen it on Linux, where I do development. I am working to fix this problem so it doesn't plague users of the main net.

This is why we do test nets. Thank you for helping.

[casper77]

what if i don't have encrypted wallet key in .json format ? i have only public&private keys.

Open breakout client console and give a try to this command:

Code:

importprivkey <breakoutprivkey> [label] [ticker]

what are [label] & [ticker] ?

[LovSan]

what if i don't have encrypted wallet key in .json format ? i have only public&private keys.

Open breakout client console and give a try to this command:

Code:

importprivkey <breakoutprivkey> [label] [ticker]

what are [label] & [ticker] ?

[label] - any name you wish, like - 111, test or just leave it as is.
[ticker] - BRO/BRX, you need both, so do it twice

Code:

importprivkey <breakoutprivkey> [111] [BRO]

then

Code:

importprivkey <breakoutprivkey> [222] [BRX]

[casper77]

i did it, what now ?

[multicurrency]

i did it, what now ?

Importing the encrypted key applies only to those who bought in the first Breakout Coin sale.

[multicurrency]

Bugfix Release 1.2.4.2

Download the new release from: https://github.com/multicurrency/Breakout-Releases/blob/master/README.md

These builds should solve the big problems, namely that the client seems to freeze when successfully importing the wallet.

One thing they won't fix is poor startup performance on Windows 64 bit. In some cases the startup will hang, in other cases it will hang and use a lot of CPU. A couple of restarts usually will get the client running.

To fix this, I plan on simply making a native 64 bit build. I have always used 32 bit to reach the widest possible audience, but the 64 bit systems have changed so much that they do not run 32 bit software very well. I will have 64 bit available for main net, but it may not happen for test net.

Thanks everyone for helping. I really am going to move on to the card lotteries now, unless any more problems crop up. Just remember, my builds currently support Linux 64 bit, OS X 6-11, and Windows NT-10 (32 & 64 bit). That's a lot of coverage, and it goes without saying that it is difficult to get everything working smoothly on all platforms.

[lujunqing7890]

Or network can not be synchronized, or purse, like the previous 1.2.4.2, delete C: \ Users \ SL \ AppData \ Roaming \ Breakout After this installation package, you can open the wallet, buffalo is not synchronized, the second hit is not opened.
breakout version v1.2.4.2 ()
Using OpenSSL version OpenSSL 1.0.1j 15 Oct 2014
Startup time: 01/30/16 08:46:25
Default data directory C: \ Users \ SL \ AppData \ Roaming \ Breakout
Used data directory C: \ Users \ SL \ AppData \ Roaming \ Breakout \ testnet
dbenv.open LogDir = C: \ Users \ SL \ AppData \ Roaming \ Breakout \ testnet \ database ErrorFile = C: \ Users \ SL \ AppData \ Roaming \ Breakout \ testnet \ db.log
Bound to 127.0.0.1:21698
TOR thread started.
AddLocal (rdcdhbvduipllvah.onion: 21698,6)
Loading block index ...
Opening LevelDB in C: \ Users \ SL \ AppData \ Roaming \ Breakout \ testnet \ txleveldb
Opened LevelDB successfully
CBlock (hash = 0000007746ebdefa50fcdc5c4dec278e4438ba4c402c36103a977ad4e62b8a3c, ver = 1, hashPrevBlock = 0000000000000000000000000000000000000000000000000000000000000000, hashMerkleRoot = 5d7659f87a6fd5423276a950326e1409c9c634e633193cd67a9f24d646c327f3, nTime = 1446015494, nBits = 1e00ffff, nNonce = 8131356, vtx = 1, vchBlockSig =)
  Coinbase (hash = 5d7659f87a, nTime = 1446015494, ver = 1, color = <none>, vin.size = 1, vout.size = 1, nLockTime = 0)
    CTxIn (COutPoint (0000000000, 4294967295), coinbase 00209b0b8e8463494f414c715544229ffdd90da8f9a0589e1f9a8aaacaf37796bef404e00b64551 c427265616b6f757420636f696e2074696d657374616d702061736466)
    CTxOut (empty)
  vMerkleTree: 5d7659f87a
========== Genesis Block Details ==========
hashTarget == 0000000000000000000000000000000000000000000000000000000000000000
block.GetHash () == 0000007746ebdefa50fcdc5c4dec278e4438ba4c402c36103a977ad4e62b8a3c
block.hashMerkleRoot == 5d7659f87a6fd5423276a950326e1409c9c634e633193cd67a9f24d646c327f3
block.nTime = 1446015494
block.nNonce = 8131356
===========================================
SetBestChain: new best = 0000007746ebdefa50fcdc5c4dec278e4438ba4c402c36103a977ad4e62b8a3c height = 0 trust = 16777472 blocktrust = 16777472 date = 10/28/15 06:58:14
Block index loaded successfully.
 block index 177ms
Loading wallet ...
nFileVersion = 1020402
Keys: 0 plaintext, 0 encrypted, 0 w / metadata, 0 total
Performing wallet upgrade to 60000

[MR1]

Bugfix Release 1.2.4.2

Download the new release from: https://github.com/multicurrency/Breakout-Releases/blob/master/README.md

These builds should solve the big problems, namely that the client seems to freeze when successfully importing the wallet.

One thing they won't fix is poor startup performance on Windows 64 bit. In some cases the startup will hang, in other cases it will hang and use a lot of CPU. A couple of restarts usually will get the client running.

To fix this, I plan on simply making a native 64 bit build. I have always used 32 bit to reach the widest possible audience, but the 64 bit systems have changed so much that they do not run 32 bit software very well. I will have 64 bit available for main net, but it may not happen for test net.

Thanks everyone for helping. I really am going to move on to the card lotteries now, unless any more problems crop up. Just remember, my builds currently support Linux 64 bit, OS X 6-11, and Windows NT-10 (32 & 64 bit). That's a lot of coverage, and it goes without saying that it is difficult to get everything working smoothly on all platforms.

Updated to the new build. Everything is fine. Staking works perfect.