notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2015, 06:30:17 PM |
|
Micro-USB sockets for data and power From the spec sheet. Does anyone know if you can set data transmission to run through through the GPIO headers on previous models? Obviously that would be the cheapest solution if used with a dedicated controller board on a miner. The header can be used to add a Wi-Fi shield. That bumps the cost up to model B prices, hence why use it? I think the reason would be for fun, or space. Buying a RPI B/B+ would be easier and they are not expensive. I do think there are multiple things such as usb to Ethernet you could get cheap and add on to RPI zero. But one thing to keep in mind is it seems most places with a RPI zero turned it into a kit with cheap accessories.... so you might even be spending more then a RPI B currently.
|
|
|
|
VirosaGITS (OP)
Legendary
Offline
Activity: 1302
Merit: 1068
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2015, 07:41:46 PM |
|
Micro-USB sockets for data and power From the spec sheet. Does anyone know if you can set data transmission to run through through the GPIO headers on previous models? Obviously that would be the cheapest solution if used with a dedicated controller board on a miner. The header can be used to add a Wi-Fi shield. That bumps the cost up to model B prices, hence why use it? I think the reason would be for fun, or space. Buying a RPI B/B+ would be easier and they are not expensive. I do think there are multiple things such as usb to Ethernet you could get cheap and add on to RPI zero. But one thing to keep in mind is it seems most places with a RPI zero turned it into a kit with cheap accessories.... so you might even be spending more then a RPI B currently. For most users who just want a turnkey, sure. For people who want to tinker a bit, i think this is great. I'm mostly thinking that it would not be hard for them to make a batch that has a Ethernet port on it. If a company request to buy a batch of 1000+ that come with a Ethernet port then it would not really drive up the price. Then they could be resold at 5-7$ at profit still.
|
|
|
|
rammy2k2
Legendary
Offline
Activity: 1974
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2015, 08:50:37 PM |
|
https://www.raspberrypi.org/blog/raspberry-pi-zero/Would sure make for cheaper Controller replacement costs? Not only could Bitmain use these, maybe, in their miners but it just made running USB miners even cheaper. Hopefully it has enough processing power to run the OS and cgminer ~ this will have ZERO impact , or almost ZERO with mining, only controllers will be maybe with 10$ cheaper ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2015, 08:59:18 PM |
|
https://www.raspberrypi.org/blog/raspberry-pi-zero/Would sure make for cheaper Controller replacement costs? Not only could Bitmain use these, maybe, in their miners but it just made running USB miners even cheaper. Hopefully it has enough processing power to run the OS and cgminer ~ this will have ZERO impact , or almost ZERO with mining, only controllers will be maybe with 10$ cheaper ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) It will have a bigger impact on some maker/project communities. A 5 dollar RPI to control someones project is pretty nice and hard to beat. You are right that it will have likely no impact on miners as far as capability. It will be more for those that enjoy tinkering testing it as a controller.
|
|
|
|
ShrykeZ
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2015, 09:38:34 PM |
|
Great little device for tinkering, learning and honestly for $5.00 this is brilliant, it is cheap enough to bring into low funded schools for students to experiment with.
|
|
|
|
Meech
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2015, 10:02:31 PM |
|
They're available for free with the December issue of MagPi magazine which if you're in the US you can find at Barnes&Noble. Unfortunately my store only had October issue in. The magazine retails for $15.99. ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif)
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 27, 2015, 11:30:42 PM |
|
They're available for free with the December issue of MagPi magazine which if you're in the US you can find at Barnes&Noble. Unfortunately my store only had October issue in. The magazine retails for $15.99. ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif) That is possibly one of the most genius ideas of selling a magazine in today's wold. I read most of my magazines on a e-reader. Just cheap and love when new months auto-download to it. That is not that bad of a price either. Most places in stock are doing bundles with other gear... so raises their profit. Cant wait till I truly can get a 5 dollar RPI.
|
|
|
|
Biodom
Legendary
Offline
Activity: 3864
Merit: 4239
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 28, 2015, 12:09:15 AM |
|
They're available for free with the December issue of MagPi magazine which if you're in the US you can find at Barnes&Noble. Unfortunately my store only had October issue in. The magazine retails for $15.99. ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif) Magpi not in B&N nearby, but there is a whole shelf of gun mags ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) ...Tejas...
|
|
|
|
Meech
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 28, 2015, 12:55:42 AM |
|
They're available for free with the December issue of MagPi magazine which if you're in the US you can find at Barnes&Noble. Unfortunately my store only had October issue in. The magazine retails for $15.99. ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif) Magpi not in B&N nearby, but there is a whole shelf of gun mags ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) ...Tejas... I wonder why? Ahh... the Lonestar State. Still too many cowboys around them parts I reckon. It's pretty much sold out unless you over pay on Ebay. I will keep checking my B&N and nearby for the issue. To me it's worth paying a little more for it now but not off of Ebay. Plus I can enjoy the read on the toilet.
|
|
|
|
mixan
Legendary
Offline
Activity: 966
Merit: 1000
TRUMP IS DOING THE BEST! MAKE AMERICA GREAT AGAIN!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 28, 2015, 01:01:21 AM |
|
How many of these would you need to mine a mbtc of bitcoin? Since they don't take up too much electricity then I am guessing they wouldn't give off much heat. So right that is a plus for them in my books. I think this is what started the pi wallet as well. Let know if I am wrong about that.
|
The parasite hates three things: free markets, free will, and free men.
|
|
|
|
Meech
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 28, 2015, 04:13:29 AM |
|
For those that follow each new Pi release you know for the first 2-3 months they are sold way above value. So waiting three weeks and buying one in a magazine for $16 is well worth it. Thank you for the heads up of the possible wait on the December issue in the US. For use as a mining controller it makes sense, just add a cheap wifi adapter but for Kodi and many other uses it just is too expensive with the additional addons. Too bad it's not a stripped down Pi2. But fun none the less.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4228
Merit: 8376
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 28, 2015, 05:00:12 AM |
|
I guess it is okay if you are willing to tinker with it. I would prefer to be able to use the newest model 2 as I own one as it is . So it would be zero cost and is more powerful then this little toy one. As for bitmaintech s-7 controllers are being bricked due to people not understanding the instructions. of starting the gear up. I have had 3 or 4 people say they turn everything off. plug in all the hash boards turn the psu's on thus all the hashboards are running they then take a hot pcie cable and plug it in the controller since instructions state to make sure hash boards are turned on first. This has fried quite a few controllers as the pcie plug can spark into the controller since it is live. https://www.bitmaintech.com/productDetail.htm?pid=000201511170341298180m44675v06133. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. If you use different PSU for hash boards and control board, please make sure to power the hash boards first and the control board only after the hash boards have been powered. When using differnt PSU and you want to power off the miner, be sure to disconnect all the PSU from power. above is why they hot plug the controller's
|
|
|
|
kano
Legendary
Offline
Activity: 4578
Merit: 1851
Linux since 1997 RedHat 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 28, 2015, 11:58:57 AM |
|
How many of these would you need to mine a mbtc of bitcoin? Since they don't take up too much electricity then I am guessing they wouldn't give off much heat. So right that is a plus for them in my books. I think this is what started the pi wallet as well. Let know if I am wrong about that.
CPU mining died 4 years ago, even with powerful CPUs With a tiny slow CPU, maybe 1000 of them would match a 1GHs miner. (yeah a 1GHs miner is pointless also) It would take 145GHs to make 0.001 BTC a day (about 35c a day) So about 145,000 of them might make 35c a day before you subtract electricity.
|
|
|
|
Finksy
Legendary
Offline
Activity: 1022
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 28, 2015, 02:48:33 PM |
|
CPU mining died 4 years ago, even with powerful CPUs
With a tiny slow CPU, maybe 1000 of them would match a 1GHs miner. (yeah a 1GHs miner is pointless also)
It would take 145GHs to make 0.001 BTC a day (about 35c a day) So about 145,000 of them might make 35c a day before you subtract electricity.
Lol ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ftheofficesportsguy.files.wordpress.com%2F2015%2F07%2F7c687debe61f4b5aca1f1465811bbd05.jpg&t=665&c=rrupIpkMiEZFHA)
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 28, 2015, 02:50:47 PM |
|
Why couldn't you use a cheap adapter like this: http://amzn.com/B00AKXE59E for ethernet? If purchased in bulk for hardware application, surely you could get pricing <$1. I wonder if there is a mini HDMI-to-USB adapter (if that is even possible). HDMI port is useless for mining, otherwise. AS far as micro usb to Ethernet-it does not make much sense to me because there are only two micro USB ports there with one dedicated to Power as far as I understand (maybe it cannot do data?), which leaves just one micro USB available for data. I assume you would want to connect micro USB (m) to USB (f) adapter there, then hook up a usb hub, THEN connect a usb to ethernet adapter to that hub. I am not sure that this concoction would work, but it might, however all these adapters would reduce the appeal (since raspberry pi B+ could be had for $19.99 with all connectors already present). However, that tiny thing looks appealing just for trying it out. I think this is dead-on. $5 for the RPI-0 (currently sold out) $5 for a cheap OTG micro USB (m) to USB (f) adapter with at least 2 USB ports $5 for a cheap USB-ethernet or $10 for a USB-wifi adapter you are looking at $15-20 total. not too bad, but it brings the cost closer to simply buying far-superior RPI 2 for ~$50
|
|
|
|
VirosaGITS (OP)
Legendary
Offline
Activity: 1302
Merit: 1068
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 28, 2015, 03:12:26 PM |
|
Why couldn't you use a cheap adapter like this: http://amzn.com/B00AKXE59E for ethernet? If purchased in bulk for hardware application, surely you could get pricing <$1. I wonder if there is a mini HDMI-to-USB adapter (if that is even possible). HDMI port is useless for mining, otherwise. AS far as micro usb to Ethernet-it does not make much sense to me because there are only two micro USB ports there with one dedicated to Power as far as I understand (maybe it cannot do data?), which leaves just one micro USB available for data. I assume you would want to connect micro USB (m) to USB (f) adapter there, then hook up a usb hub, THEN connect a usb to ethernet adapter to that hub. I am not sure that this concoction would work, but it might, however all these adapters would reduce the appeal (since raspberry pi B+ could be had for $19.99 with all connectors already present). However, that tiny thing looks appealing just for trying it out. I think this is dead-on. $5 for the RPI-0 (currently sold out) $5 for a cheap OTG micro USB (m) to USB (f) adapter with at least 2 USB ports $5 for a cheap USB-ethernet or $10 for a USB-wifi adapter you are looking at $15-20 total. not too bad, but it brings the cost closer to simply buying far-superior RPI 2 for ~$50 How about 5$ for the RPI-0. 0.25$ for the components to solder an Ethernet port on? (Assuming its possible) or 2$ for a USB-wifi adapter (ebay, from china) A USB-hub you have or will need anyways, whether you use one or the other? I still see a 43$ difference. I'm not sure why you need a 1->2 ports adapter if you get a Hub anyways?
|
|
|
|
alh
Legendary
Offline
Activity: 1845
Merit: 1052
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 29, 2015, 01:41:14 AM |
|
While I too am curious and will probably buy one, it will strictly be for tinkering. Here in Minnesota, our local Micro Center has the Raspberry Pi B+. Same CPU and memory as the Pi-Zero, but 4 normal USB ports, and the Ethernet jack, all put together for $20 (retail price). While I am sure it would be possible to embellish a Pi-Zero to run an ASIC miner, it would make zero economic sense. I suspect that is true for most folks as well.
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 29, 2015, 03:23:15 AM |
|
While I too am curious and will probably buy one, it will strictly be for tinkering. Here in Minnesota, our local Micro Center has the Raspberry Pi B+. Same CPU and memory as the Pi-Zero, but 4 normal USB ports, and the Ethernet jack, all put together for $20 (retail price). While I am sure it would be possible to embellish a Pi-Zero to run an ASIC miner, it would make zero economic sense. I suspect that is true for most folks as well.
You can get 4 port USB hubs and Ethernet to usb much cheaper then 15 dollars. Once it truly is being sold at 5 it will be a pretty good deal. But a lot of sites are overpricing accessories and putting them together with a Pi Zero as bundle. Until there are more zeros on market we can expect to see this.
|
|
|
|
Meech
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 29, 2015, 05:43:56 AM |
|
How many of these would you need to mine a mbtc of bitcoin? Since they don't take up too much electricity then I am guessing they wouldn't give off much heat. So right that is a plus for them in my books. I think this is what started the pi wallet as well. Let know if I am wrong about that.
CPU mining died 4 years ago, even with powerful CPUs With a tiny slow CPU, maybe 1000 of them would match a 1GHs miner. (yeah a 1GHs miner is pointless also) It would take 145GHs to make 0.001 BTC a day (about 35c a day) So about 145,000 of them might make 35c a day before you subtract electricity. Cpu and Gpu mining aren't dead, yes you won't be rich in a couple of years. But.... if you are the type of person that leaves your computer(s) on all the time why not mine with them. I'm doing that with Ftc just for giggles. Far better than not doing it. Accumulate some hold them or trade for Ltc. Other cryptos will rise as they did when Btc rises. When no one can mine Btc cryptos will be your best bet. It's about as lame as the guys a couple years ago that said Btc mining with your cpu is foolish and will never be worth anything. Cpu mining Btc "yes Dead".
|
|
|
|
|