[Guide] Dogie's Comprehensive Avalon Avalon6 Setup [HD]

[Rabinovitch]

https://canaan.io/downloads/software/avalon6/openwrt/latest/brcm2708/

Try this link.

Also, you may not see the powered and flashed Raspberry since it has 192.168.0.100 IP address by default. Try to log in using this address.

[dogie]

Another question is: can I fix an avalon control unit that became inoperative after MM upgrade (LED is constantly switched off)?

Doesn't sound like it'd be salvageable.

Also, you may not see the powered and flashed Raspberry since it has 192.168.0.100 IP address by default. Try to log in using this address.

Yeah, more likely a fixed static IP not in range than anything to do with firmware.

[imteamleader]

https://canaan.io/downloads/software/avalon6/openwrt/latest/brcm2708/

Try this link.

Also, you may not see the powered and flashed Raspberry since it has 192.168.0.100 IP address by default. Try to log in using this address.

I got these links from Canaan support, but wasn't sure which one to use. I ended up trying them all a few times and got one working, thank for the links.

Also, you may not see the powered and flashed Raspberry since it has 192.168.0.100 IP address by default. Try to log in using this address.

Yeah, more likely a fixed static IP not in range than anything to do with firmware.

I think it was the firmware as I was trying the 192.168.0.100. It did finally show up when I got the right firmware. Some reason now though it has a different IP address, but things are up and running.

Thank you both for your help!

[Rabinovitch]

Next MM upgrade on this problematic unit right after upgrade failure helped to bring it back to operation.

My next question is: does anyone have an information about A6's error codes? Previously there was available an errors query form here, which is unavailable now. Did anyone save it?

[HagssFIN]

Next MM upgrade on this problematic unit right after upgrade failure helped to bring it back to operation.

My next question is: does anyone have an information about A6's error codes? Previously there was available an errors query form here, which is unavailable now. Did anyone save it?

You can find it here https://en.bitcoin.it/wiki/Avalon6#MM_Error_Codes

[quorle]

hello, I have a question regarding the hashboar. On my Avalon 6.01 the second hashboard has failed. There are two LEDs per hashboard. The first LED indicates the input voltage, which also lights up for me and the second LED indicates the output voltage, which no longer lights up for me. Is it possible to repair the hashboard yourself? Respectively, are there any known components on the hashboard that you can change in such a case for the hashboard to work again?

[HagssFIN]

hello, I have a question regarding the hashboar. On my Avalon 6.01 the second hashboard has failed. There are two LEDs per hashboard. The first LED indicates the input voltage, which also lights up for me and the second LED indicates the output voltage, which no longer lights up for me. Is it possible to repair the hashboard yourself? Respectively, are there any known components on the hashboard that you can change in such a case for the hashboard to work again?

Hi, send a message to lightfoot here at the forum.
He could be able to help you, if you try to do board level repairs.