[Enhanced Firmware Mod] Dragon Bitcoin Miner ALL (1T,1.5T,2T) versions

[mxnsch]

Working well on my 1TH Dragon thanks  

Glad it works for you, have fun!

[tanyz85]

great firmware !! thx for the share..


btw.. i juz wanna ask u guys what PSU do u use? for the 2th version. i have a few of them without psu.. and i tried a few corsair and coolermaster 1000w PSU but cant power on. even burned(really burned.. with fire and all) 1 controller board and 1 psu in the process..

[mxnsch]

I used a XFX ATX ProSeries Black Edition 1250 in the last one, but can recommend any that are 80 PLUS Gold Certified.
Don't try to save a buck on the Power Supply.

[tanyz85]

I used a XFX ATX ProSeries Black Edition 1250 in the last one, but can recommend any that are 80 PLUS Gold Certified.
Don't try to save a buck on the Power Supply.

i burned a corasir 1000w gold rm series if i remember correctly. they cost a bomb and i dont think i save a buck there though.. lol..

thx for the input.. ill try to find the same psu u have..

[tribalfather]

    I have several of theses 1th/s miners, one had its card wiped by 'accident'. I have been trying to install firmware onto new sd card, have flashed the card so many times it is reporting me to police! This 'easy' process has been sworn at, cursed and almost thrown in bin. Can I purchase the firmware already flashed to a sd card, or can I clone one of the other three (tried simple way- no play today).

   Please help, really, really doing head in now.

    Thank you in advance

[mxnsch]

    I have several of theses 1th/s miners, one had its card wiped by 'accident'. I have been trying to install firmware onto new sd card, have flashed the card so many times it is reporting me to police! This 'easy' process has been sworn at, cursed and almost thrown in bin. Can I purchase the firmware already flashed to a sd card, or can I clone one of the other three (tried simple way- no play today).

   Please help, really, really doing head in now.

    Thank you in advance

Calm down.
What devices do you own exactly?
How do you wipe a card by accident?
Do the other miners still work?
What Operating System are you using?

[dragonminer]

when i download both mirrors the DHCP ones and i try to open them it just says file corrupted can you please upload another way to download? i need the DHCP becuase my network runs off 10.0.0 and my miner is 192.168.1 please and thank you i also have the dragonminer 1 t/h

[mxnsch]

The files are absolutely fine. How are you unpacking them?

• Please try with a recent version of Winrar (>= 5.x)
• Check the file SHA1 after download

SHAs - (see top of the thread):
SHA1(dragon_miner_mxnschmod_firmwarev1.2_20160108_ip254.rar)= 5de83e14ced8aa3326d2046a5d5b4a1b95d30a03
SHA1(dragon_miner_mxnschmod_firmwarev1.2_20160108_DHCP.rar)= 1b2fdf0e215c8b47e81925274cde4a8484640009

On Windows:

Code:

FCIV -md5 -sha1 dragon_miner_mxnschmod_firmwarev1.2_20160108_DHCP.rar

The following article will help you certainly:
https://support.microsoft.com/en-us/kb/889768

[dragonminer]

unpoacking with rar when its finished it just says file is corrupt ill download and try again with updated rar

[dragonminer]

still not working i just keep getting "file corrupt" when trying to extract from winrar

this is what i got for sha1sum

1b2fdf0e215c8b47e81925274cde4a8484640009 dragon_miner_mxnschmod_firmwarev1.2_20160108_dhcp.rar

also when typing the the DCHP IP in the address bar do i just put  http://$IP because when i do it just brings me to google.

[dragonminer]

i finally got everything to work but then i tried to set an ip and im unable to access it now how can i take out the IP i set in the settings

[mxnsch]

i finally got everything to work but then i tried to set an ip and im unable to access it now how can i take out the IP i set in the settings

Can you access the Miner Webgui or Console?
The relevant config file is

Code:

/etc/network/interfaces

You should see the Miners assigned IP in your Routers web interface.

[slavadp1]

Please tell me how to overclock and how to connect to the interface to make shh acceleration? Do you already have firmware that you can overclock it to do? And whether the firmware has enabled miners extonce subscribe

[mxnsch]

Please tell me how to overclock and how to connect to the interface to make shh acceleration? Do you already have firmware that you can overclock it to do? And whether the firmware has enabled miners extonce subscribe

It's all explained in the first two posts. Please take your time and read them, it will work!

[Palm_Maniac]

Hello,

I recently bought a Dragon Miner 1TH / s via ebay and use as a system this firmware here. It uses the CGMiner V3.9.0.1, but it is currently V4.9.2. How would I have to proceed to upgrade the cgminer without equal to destroy the whole firmware?

I am a Linux beginner, so please do it step by step.

Thanks and sorry for my english, it is from Google.

[Unacceptable]

Hello,

I recently bought a Dragon Miner 1TH / s via ebay and use as a system this firmware here. It uses the CGMiner V3.9.0.1, but it is currently V4.9.2. How would I have to proceed to upgrade the cgminer without equal to destroy the whole firmware?

I am a Linux beginner, so please do it step by step.

Thanks and sorry for my english, it is from Google.

Is it working?? Then why mess with it?? 

[mxnsch]

Hello,

I recently bought a Dragon Miner 1TH / s via ebay and use as a system this firmware here. It uses the CGMiner V3.9.0.1, but it is currently V4.9.2. How would I have to proceed to upgrade the cgminer without equal to destroy the whole firmware?

I am a Linux beginner, so please do it step by step.

Thanks and sorry for my english, it is from Google.

You can't upgrade the cgminer version as it includes proprietary, binary drivers i did not bother reversing.

[ds-squad]

Hello, can you reupload DragonMiner 2T Original Firmware? Dropbox links doesn't work. Thanks

[Julian1990]

Hi,

i am use this firmware now one month. Now i want to start Mining at the Nicehash Mining Pool. I tried the whole day now to setup the miner into the XnSub mode.
I changed the this config into the     /opt/stratum-proxy/stratum-proxy.conf :

"pools" : [ {
    "name" : "Nicehash",
    "host" : "stratum+tcp://sha256.eu.nicehash.com:3334",
    "user" : "31yjiLRrgS8DusTz6YnZiwdoeXzkbqmK4m",
    "password" : "x",
    "enableExtranonceSubscribe" : true,
    "appendWorkerNames" : false,
    "workerNameSeparator" : ".",
    "useWorkerPassword" : false,
    "weight" : 9,
    "isEnabled": true
  }, {
    "name" : "Nicehash",
    "host" : "stratum+tcp://sha256.eu.nicehash.com:3334",
    "user" : "31yjiLRrgS8DusTz6YnZiwdoeXzkbqmK4m",
    "password" : "x",
    "enableExtranonceSubscribe" : true,
    "appendWorkerNames" : false,
    "workerNameSeparator" : ".",
    "useWorkerPassword" : false,
    "weight" : 9,
    "isEnabled": true
  }, { 
    "name" : "Antpool1",
    "host" : "stratum+tcp://stratum.antpool.com:443",
    "user" : "mxnsch.worker38",
    "password" : "x",
    "enableExtranonceSubscribe" : true,
    "appendWorkerNames" : false,
    "workerNameSeparator" : ".",
    "useWorkerPassword" : false,
    "weight" : 1,
    "isEnabled": true
  } ]


then i removed the hashes into the /etc/rc.local.real ...


I dont understand what you mean when you say:"    to apply these settings automatically. You can access the stratum proxy web interface at

http://192.168.1.254 OR via it's DHCP assigned address at http://$IP[/li][/list]

3.) Last but not least, you must change your pool settings to point cgminer to the local stratum-proxy. The defaults are 127.0.0.1 and port 3333. Restart your Miner with
Code:

shutdown -r now

to apply these settings automatically.

You are DONE! ;-)
"...

Please Help 

[mxnsch]

It means you need to set the cgminer pool address to 127.0.0.1:3333 because that is where the hashes are sent to. In your case, that's a locally listening stratum-proxy. The local stratum-proxy re-routes depending on your config settings automatically. I hope that helps, i don't have any of these devices anymore.