Hello
I have a problem with a S7 from batch8 and was hoping someonce can help?
My 1 miner was initially mining fine on Antpool at the expected hashrate, I then changed it to Cadence`s P2Ppool and the hashing was really bad so changed back to Antpool, but now the miner is only hashing at about 3TH instead of around 4.73TH.
Have updated the firmware and power cycled the miner numerous times, miner is at a remote DC so checking if a power off for short while and power back on has been done and will update this thread once I know, below is from the log, chain 1 and 3 are working fine, on chain 2 only 31 chips are live
.
559.496729] chain2 reg crc_r{0x16}crc{0x13} Err ret{0x80d1c2ff}
[ 559.502998] asic cmd return 80d1c2ff
[ 559.506741] chain2 reg crc_r{0x16}crc{0x13} Err ret{0x80d1c2ff}
[ 559.512931] asic cmd return 80d1c2ff
[ 559.516676] chain2 reg crc_r{0x16}crc{0x13} Err ret{0x80d1c2ff}
[ 559.522862] asic cmd return 80d1c2ff
[ 559.526609] chain2 reg crc_r{0x16}crc{0x13} Err ret{0x80d1c2ff}
[ 559.532804] asic cmd return 80d1d189
[ 559.536555] chain2 reg crc_r{0x1f}crc{0x64} Err ret{0x80d1d189}
[ 559.542742] asic cmd return 80d1d189
[ 559.546489] chain2 reg crc_r{0x1f}crc{0x64} Err ret{0x80d1d189}
[ 559.553708] asic cmd return 80d1d189
[ 559.557496] chain2 reg crc_r{0x1f}crc{0x64} Err ret{0x80d1d189}
[ 559.563686] asic cmd return 80d1d189
[ 559.567433] chain2 reg crc_r{0x1f}crc{0x64} Err ret{0x80d1d189}
[ 559.573610] asic cmd return 80d1d189
[ 559.577351] chain2 reg crc_r{0x1f}crc{0x6c} Err ret{0x80d1d189}
[ 559.583550] ch2-as33: dev->task_buffer_wr{0x00000923}rd{0x00000d23}ret
work_id{0x8d11} don't match task_buffer_match{0x0d11}
[ 559.596043] ch2-as33: dev->task_buffer_wr{0x00000923}rd{0x00000d23}ret
work_id{0x8d14} don't match task_buffer_match{0x0d14}
[ 559.607863] ch2-as8: dev->task_buffer_wr{0x00000923}rd{0x00000d23}ret
work_id{0x8cf3} don't match task_buffer_match{0x0cf3}
[ 559.619713] asic cmd return 80117e0f
[ 559.623482] chain2 reg crc_r{0x1d}crc{0x2b} Err ret{0x80117e0f}