[POOL] Mining-Dutch ( SOLO,PARTY,POOLED + MULTIPORT + Currency Convertion)

[RivAngE]

Hello. I'd like to try your pool because I like how transparent everything is.
However the NemosMiner which supports auto-switching between algos doesn't support your pool. It's open source though and I might be able make it work somehow, but maybe there's a miner with auto-switching functions that support your pool?

[QiaMiner]

Hi All.

Hi Cryptofarmer,
i have a huge Problem with your Pool using Awesome Miner.

If i, lets say, mine Neoscrypt with round about 50 Machines, your Dashboard is only showing 20 to 30 of them, and half of them as Dead.

BUT: on the real Desktops, they are mining and finding accepted shares ALL THE TIME! Everything is running quite well.

And this happens with nearly ALL algos on my Machines, mining on your Pool.


Awesome Miner reports: "No Accepted Shares found in 3 Minutes", wich my Miners on the Console proof wrong.

If i check that with all Machines on another Pools, with same Algo, everything is absolutly working fine!

If you like, i can document this, cause this Problem is to reproduce everytime with ease. In the Moment i'm not mining on your Pool, because of this.


Can you please declare this to me? Is there anything i can do? Other Thing: why can't i view Poolstats of Mimning Dutch on Awesomeminer, like on every other Pool? Miningpool Hub works quite fine, with same Settings on Username.

Thank you for Help!
I the meantime, i switched off your Pool in Awesome Miner, cause it has cost me a lot money till now.
The Numbers aren't correct and something is wrong with the stettings of this Pool. Hope this can be solved.

[Oskarza]

comparsion mining-dutch vs prohashing and viabtc .
with 6 antminer s9 13.5TH i get 0.00085020 BTC in 8 hours mining ca 6,22$
mining prohashing pool             0.00138493                                 ca10.11$
mining viabtc  pool                   0.00134657                                  ca 9.83$

[leoncryp]

Anyone having withdraw issues?
I requested a withdraw few days ago, 23-07-2018

Status Payed = Confirm but no Transaction Details on the Info Column?

[leoncryp]

They resent payment already, took them around a week to response/rectify to the support tick.

[fabry1999]

I have a Baikal X10 and I'm using multialgo with Mining Dutch, I have try to use the algorithm switch tool but I can not find the X10;
the miner is on the same subnet of the PC where I have install the utility and search the specific IP set up on Baikal but doesn't work.

Someone can help me ?

thx

[XcelR]

Hey

We wanted to know if you could add XcelR to your Mining Pool


GitHub Repo:
https://github.com/xcelr/XcelR


BitcoinTalk Thread:
https://bitcointalk.org/index.php?topic=4765600

[GuldenMining]

Please can you update your pool to the following version for Gulden. https://github.com/Gulden/gulden-official/releases/tag/v2.0.0.11 before next week Tuesday.
Please also review https://github.com/Gulden/gulden-official/blob/master/mining_documentation/mining_Gulden.md for optimal settings.

Let me know if you have any issues.

[pc888]

Hello I sent a PM a few days ago, regarding updating Bata to Core 0.16.2.79

https://github.com/BTA-BATA/Bataoshi/tree/0.16

The update is mandatory and in preparation for activation of Masternodes and Multi-Algo

Thanks in advance.

[pc888]

Hello I sent a PM a few days ago, regarding updating Bata to Core 0.16.2.79

https://github.com/BTA-BATA/Bataoshi/tree/0.16

The update is mandatory and in preparation for activation of Masternodes and Multi-Algo

Thanks in advance.

Hello,

Bata has activated the following spork for block 1100000:


00:24:06
{
  "SPORK_2_INSTANTSEND_ENABLED": 0,
  "SPORK_3_INSTANTSEND_BLOCK_FILTERING": 0,
  "SPORK_5_INSTANTSEND_MAX_VALUE": 1000,
  "SPORK_8_MASTERNODE_PAYMENT_ENFORCEMENT": 4070908800,
  "SPORK_9_SUPERBLOCKS_ENABLED": 4070908800,
  "SPORK_10_MASTERNODE_PAY_UPDATED_NODES": 4070908800,
  "SPORK_12_RECONSIDER_BLOCKS": 0,
  "SPORK_13_OLD_SUPERBLOCK_FLAG": 4070908800,
  "SPORK_14_REQUIRE_SENTINEL_FLAG": 4070908800,
  "SPORK_FXTC_01_HANDBRAKE_HEIGHT": 4070908800,
  "SPORK_FXTC_01_HANDBRAKE_FORCE_SHA256D": 1,
  "SPORK_FXTC_01_HANDBRAKE_FORCE_SCRYPT": 1,
  "SPORK_FXTC_01_HANDBRAKE_FORCE_NIST5": 1,
  "SPORK_FXTC_01_HANDBRAKE_FORCE_LYRA2Z": 1,
  "SPORK_FXTC_01_HANDBRAKE_FORCE_X11": 1,
  "SPORK_FXTC_01_HANDBRAKE_FORCE_X16R": 1,
  "SPORK_FXTC_02_IGNORE_SLIGHTLY_HIGHER_COINBASE": 4070908800,
  "SPORK_FXTC_02_IGNORE_FOUNDER_REWARD_CHECK": 4070908800,
  "SPORK_FXTC_02_IGNORE_FOUNDER_REWARD_VALUE": 4070908800,
  "SPORK_FXTC_02_IGNORE_MASTERNODE_REWARD_VALUE": 4070908800,
  "SPORK_FXTC_02_IGNORE_MASTERNODE_REWARD_PAYEE": 4070908800,
  "SPORK_FXTC_03_BLOCK_REWARD_SMOOTH_HALVING_START": 4070908800,
  "SPORK_BATA_01_FXTC_CHAIN_START": 1100000,
  "SPORK_BATA_02_UNLIMITED_BLOCK_SUBSIDY_START": 4070908800
}


Check if you see this in your wallet by "spork show" command in console

Please check if you have this commit applied on yiimp (if using yiimp):

https://github.com/tpruvot/yiimp/commit/9dbce85dcc2137e563e87659f9827aa7e4be3244

As pools will have to enable 1% charity to address B689SM77Pe56wJze6KPywtKkva9rhPZZUc

Old wallets will fork because v2 blocks will not be backward compatible - multi algo will be enabled.

SHA256D, SCRYPT, NIST5, LYRA2Z, X11 and X16R will be Bata's multi algo.

Block rewards will be dynamic up to 0.25 BTA. That means only with enough nethash full block rewards will be mined.

If you require any assistance with enabling these algos, please let me know.

Regards,
Peter

[pc888]

Hello again,

Difficulty was wrong in new algos as there were no previous blocks. We reverted back to scrypt.


Github source code has been updated with error rectified. Wallets will be compiled. Exchanges and pools contacted to update. Block number to start multi algo will be decided soon. 



https://github.com/BTA-BATA/Bataoshi


Please update to rectify issue.

I will be in touch to advise when spork has been executed again.


Sorry for the trouble.

Regards,
Peter Caruana
BATA Founder

[antminerguruguy]

I can't log into mining dutch I am assuming its because they are all idiots to me for some reason selfishly making up real world wealth from themselves illegally.

[flowjob]

EMC2 is on the wrong chain. This is the right chain: https://chainz.cryptoid.info/emc2/

[einsteinium]

VERY IMPORTANT NOTICE from EMC2:
 
All:
Please read this:
https://bitcointalk.org/index.php?topic=494708.msg46989255#msg46989255

We need immediate pool Admin attention:
 
Please switch to new wallet version 0.13.50.0 now to make sure that miners are on the right chain, while at the same time  help us go quickly through this fragile upgrade.

New Wallet is available at:
https://github.com/emc2foundation/einsteinium
Branch: Master
Version 0.13.50.0

[einsteinium]

We noticed that you updated, but still using old chain.

Please use re-sync or use the bootstrap: https://bootstrap.0x03.services/einsteinium/emc2.tgz
This is the correct chain: https://chainz.cryptoid.info/emc2/

Thanks you,

[R-J-F]

I can't log into mining dutch I am assuming its because they are all idiots to me for some reason selfishly making up real world wealth from themselves illegally.

Seriously? That's your assumption? A little harsh don't you think? Looks like 2000 plus workers mining there right now, quite a scam or, maybe there is a reason YOU can't login? Did you contact their tech support?

[carlosSantana]

I have a Baikal X10 and I'm using multialgo with Mining Dutch, I have try to use the algorithm switch tool but I can not find the X10;
the miner is on the same subnet of the PC where I have install the utility and search the specific IP set up on Baikal but doesn't work.

Someone can help me ?

thx

same problem here , could you solve it ?

[lennujuht]

Hi, I am using ASIC ZigZ1+
Algo: lyra2rev2

It is not clear how to configure miner on your website.

what should I set in URL ?
what  should I set as USER NAME (usualy BTC address)
what should I set as a PASS

why I should Download EWBF ?
where should I put Commandline ?

[cryptofarmer]

   Dear Devs,

 I am a newcomer to crypto-currencies and I have four questions to ask:

1) The Auto-Payout column is in:
 a) Mined coins,
 b) Equivalent bitcoins,
 c) Equivalent fiat money?


2) Autoconverted coins have greyed-out "Auto-Payout" and "Wallet Address" columns obviously because they are not paid-out to a wallet but converted to another coin (DASH in my case).
Yet, some coins (ICASH, LOOK) DO NOT have "Auto-Payout" and "Wallet Address" greyed-out despite having me having selected them to Autoconvert to DASH like almost every other coin.


3) In your multiport info it reads:
"The Multiport checks all profitability every 20 seconds, and then switch to the most profitable coin immediately, It does not wait for a block to be found, It just goes for the profit immediately."

Isn't that wasteful? Say the pool is ALMOST DONE solving a block of DASH (95% completed)!
Just then a coin switch occurs!, which means ALL THIS work goes down the drain!
Shouldn't the pool wait for the block to finish since in all probability the solution is really close and the block reward will more than compensate the lower profitability?


4) Isn't the PROP system that you use, vulnerable to pool hopping?


Thank you for your time,
---
Theo

1. the auto payout column is in mined oins.
2. These coins then cannot be traded anywhere, therefore we leave them free to withdraw
3.  There is no "almost done" state in mining, you either got the solution, or you don't.
So not wasteful, we have made some changes in our switching algorithms, that makes the switch more smooth / less rejects.
4. A bid yes, that's why we do not accept nicehash at this moment. smaller hoppers don't harm us much ( at all )

[whatev4]

how i set stratum if i rent the hash?
any support email for pool , maybe i need ask something ?
tq - sry i'm just newby miner