antminer s7 beeping / not connecting to the pool

[jameel354]

i have just got my new s7 and it will not start mining and it keeps beeping and i dont know how to stop the beeping noise

i have connect it to f2pool and set up a work. on the monitor screen it says it is alive but it is still beeping i dont know how to fix it.
here is my main screen = http://prntscr.com/a9qcq8
networking tab = http://prntscr.com/a9qe45
mining config tab = http://prntscr.com/a9qdfz
mining ad config = http://prntscr.com/a9qdk9
mining status = http://prntscr.com/a9qdt7
Diagnostics page = http://prntscr.com/a9qe8t

also i dont think the miner is connecting to the pool.

[1715676158]

1715676158

[1715676158]

1715676158

[1715676158]

1715676158

[1715676158]

1715676158

[1715676158]

1715676158

[1715676158]

1715676158

[unholycactus]

The beeping noise signifies that the miner cannot connect to the internet.
If you can access the HTML configuration base, it must mean that the info to connect the f2pool isn't correct.

[jameel354]

could it be how i set up the static ip?

[VirosaGITS]

could it be how i set up the static ip?

I dont think you should use static ip, you should use static DHCP lease. Anyways, the screenshot you uploaded doesnt work. It show a broken image link. Maybe re-up so i can get a better idea. Also i'd say try to mine at Kano pool;
https://www.kano.is/

Its easy to setup and will let us know if its just you not using the right pool url/pw.

You may also simply want to mine there, as well.

[ericjohy]

could it be how i set up the static ip?

I dont think you should use static ip, you should use static DHCP lease. Anyways, the screenshot you uploaded doesnt work. It show a broken image link. Maybe re-up so i can get a better idea. Also i'd say try to mine at Kano pool;
https://www.kano.is/

Its easy to setup and will let us know if its just you not using the right pool url/pw.

You may also simply want to mine there, as well.

thank you for your idea me also confuse now clear my way now am using static DHCP... 

[jameel354]

here is my main screen = http://prntscr.com/a9qcq8
networking tab = http://prntscr.com/a9qe45
mining config tab = http://prntscr.com/a9qdfz
mining ad config = http://prntscr.com/a9qdk9
mining status = http://prntscr.com/a9qdt7
Diagnostics page = http://prntscr.com/a9qe8t

the static ip works because i pinged a website. it could be it overheating?? but i dont know

[VirosaGITS]

here is my main screen = http://prntscr.com/a9qcq8
networking tab = http://prntscr.com/a9qe45
mining config tab = http://prntscr.com/a9qdfz
mining ad config = http://prntscr.com/a9qdk9
mining status = http://prntscr.com/a9qdt7
Diagnostics page = http://prntscr.com/a9qe8t

the static ip works because i pinged a website. i could be it overheating?? but i dont know

Your temps are above the safety failsafe, but you have no mining done at all. Normally you'll mine a bit before it goes to failsafe mode. Try spinning your fan to full speed and try the Kano pool i recommended.

Edit: I see you set your fan to 100%, you typically don't do that, set it to 80%.

[jameel354]

i have set it to 80% and it is still beeping. i think it is beeping because of the temp in that room,  i am running it in the houses next to the front door, but it is on a wooden table.
i am planning to move it to a outhouse so it will be well ventilated.
can i ask what does the stuff in the red box mean?
http://prntscr.com/a9ys0x

[VirosaGITS]

i have set it to 80% and it is still beeping. i think it is beeping because of the temp in that room,  i am running it in the houses next to the front door, but it is on a wooden table.
i am planning to move it to a outhouse so it will be well ventilated.
can i ask what does the stuff in the red box mean?
http://prntscr.com/a9ys0x

I dont know, it would need to be really hot for the miner to start at over 80C. A human would die in such heat.

And what do you mean, the stuff in the red box? You circled just about every single thing.

And i still dont see Kano.is on your list.

Theres nothing wrong with the ASIC count and o status mean Okay.

[jameel354]

i have put it in the outhouse and it is still getting relay hot
http://prntscr.com/aa87ao
i dont know how to cool it? an good suggestions?

[algin8189]

Suggestion 1. Dont overclock your s7, i looked into your screenshot.... u are overclocking the chips.......
Suggestion 2. Set your fan speed at 60-70% if u wanna overclock, your fan spinning at 1900rpm? Pretty sure you are setting the fan speed around 10-20% due to the noise.....( i dont have a s7, im just guessing the fan rpm)
Suggestion 3. Turn it off, so it wont overheating again.

[jameel354]

how do i turn of the overclock?
it is fine know
 http://prntscr.com/aac2x0

[philipma1957]

how do i turn of the overclock?
it is fine know
 http://prntscr.com/aac2x0

the freq needs to be set to 700 not 725

[jameel354]

okay thanks

[philipma1957]

okay thanks

look at the error rates  you are at about  0.600  with freq 725

your error rates should be much lower.

set at freq 700  wait an hour and send a screenshot I will compare the error rate.

I would like to see 0.0600  not   0.6000

[jameel354]

how do i see the error rates?
okay i have changed it to 700
http://prntscr.com/aape42

[jameel354]

it has been a hour
http://prntscr.com/aaqdvm

[philipma1957]

it has been a hour
http://prntscr.com/aaqdvm

I am sorry I missed this.  your error rates are in red and you are doing great
leave it alone!!!

[jameel354]

what will happen if i keep in on 800 freq?
and why did you cover my workers names?
also what do the errors mean? what is the boundary? what will happen if i go over that boundary?
also what pool do you mine on?

[cameltoe]

what will happen if i keep in on 800 freq?
and why did you cover my workers names?
also what do the errors mean? what is the boundary? what will happen if i go over that boundary?
also what pool do you mine on?

How long have you been running these settings?