First off I purchased the EVGA SuperNOVA 1300w psu thinking its is enough. This is how it is setup
https://imgur.com/Eig0vG4 I have lots of those "vga" 8 pin to 6+2 pin connectors that will connect to my miner. Can I use these? Also is it safe to go from 8 pin to 6 pin? Also some of those 8 pin give 2 6+2 pin giving me a total of 8 possible 6 pin connections to my miner... I just want to not risk burning my miner because I gave it too much power on one pci-e
If this doesn't work, I will buy 2 separate power supplies because I only have an 120v/15amp outlet. So what power supplies do I need to to run the miner?
Keep the evga 1300 run it on 2 boards use all six cables
and then get a 760 watt psu run 1 board/blade and the controller.
if you want I have a quality seasonic 760 watt platinum used good price.
http://www.amazon.com/Seasonic-SS-760XP2-Platinum/dp/B009VV55TA/ref=sr_1_4?some will tell you the evga 1300 can do the trick and on the batch 1 or batch they worked you could split cables.
if you have a batch 8 or newer do it right. I can sell the platinum seasonic to you cheap. with 4 pcie connectors
you could add a new evga 750 watt
http://www.amazon.com/EVGA-SuperNOVA-Crossfire-Warranty-220-G2-0750-XR/dp/B00IKDETOW/ref=sr_1_5?this would do 1 blade and the controller