New avalon6 group buy interest thread. 650 usd Closed

[philipma1957]

https://bitcointalk.org/index.php?topic=1257327.msg14136125#msg14136125


As per kilo17 and BlockC

650 per unit  with minimum of 10 units.

I ran two of these and they went well.

What we do is place btc to me I send to BlockC  

If you are west coast BlockC drop ships it to you for 12 bucks ups ground.

If you are east coast I get them and ship them out to you  for 15-20 bucks.  Depends how close to NJ 07731

If you are in center of country most likely 12 usd  drop ship from  BlockC

You get an:

avalon6
a rasp pi with software
a power supply = a wall wart for the rasp pi
2 usb cables
1 little blu light usb to 4 pin wire adapter
1 4 pin wire cable


1)  I would want 1 or  2 units.  .  I pd for 1
2) jonnybravo0311     2  .             pd for 2
3) Biffa                      2  .
4) talks_cheep           1  .             pd for 1
5) tlhIlwI                   1 .              pd for 1
6) Mikestang              1  .
7) pikachuy                1 .             pd for 1
HagssFIN               1 .             pd for 1
9) Kuulani                  1 .             Pd for 1
10) jmunich                2.             pd for 2

Okay this is  more  10 or 11 on order and 9 units are  paid for.

I will start collecting in 3 hours   10pm eastern standard time  as we have enough to order

we need to get to 10 we are at  7 to 9 right now


monies will be here please wait to send.


Please send coins by 2pm thurs today!. - eastern standard time

I will quote your pm.  only pay to this address

and I put a dust number at the end  like 2.00001234  btc  those last four mark your proof of payment

Avalon6 Group Buy - 1BHKKrAh5oTacQnmjfACXjE9cGyFRR8rVD


I will want to send money by thurs day  5 pm eastern standard time  so it can be shipped from blockc on thurs ? or fri this week


okay so far

Philipma1957  paid for one unit

https://blockchain.info/tx/40a3d3ec1957b0db82f086d66ae0fd9e55a44e804a512820c8978c3511e6c357


I have sent pm's out to

1)talks_cheep
2)Mikestang
3)jonnybravo0311
4)pikachuy
5)HagssFIN
6)Biffa
7) tlhIlwI
8 ) Kuulani
9) jmunich ----waiting on shipping info

all pm's use this payment address


Avalon6 Group Buy - 1BHKKrAh5oTacQnmjfACXjE9cGyFRR8rVD

[jonnybravo0311]

$650?

I'm in for 2.

Phil, you might want to clarify the power supply is the wall wort for the Pi - not a PSU for the Avalon.  Unless you're including the Avalon PSU in the $650 price, which would be unbelievable.

[philipma1957]

https://bitcointalk.org/index.php?topic=1257327.msg14136125#msg14136125


As per kilo17 and BlockC

650 per unit  with minimum of 10 units.

I ran two of these and they went well.

What we do is place btc to me I send to BlockC  

If you are west coast BlockC drop ships it to you for 12 bucks ups ground.

If you are east coast I get them and ship them out to you  for 15-20 bucks.  Depends how close to NJ 07731

If you are in center of country most likely 12 usd  drop ship from  BlockC

You get an:

avalon6
a rasp pi with software

a power supply = a wall wart for the rasp pi   not for the avalon

2 usb cables
1 little blu light usb to 4 pin wire adapter
1 4 pin wire cable


1)  I would want 1 or 2 units.

$650?

I'm in for 2.

Phil, you might want to clarify the power supply is the wall wort for the Pi - not a PSU for the Avalon.  Unless you're including the Avalon PSU in the $650 price, which would be unbelievable.

  Fixed it.

[dunand]

a power supply = a wall wart for the rasp pi

Just a tip. If you are using ATX power supply to power your miners. You can build yourself a custom cable from a free AUX connector on your power supply to power the raspberry PI. You just need a 5V and a ground. 

[Biffa]

I'm in for one Phil as before. Need to ship to UK however.

[talks_cheep]

I will take 1, will need ship to California.

[pikachuy]

Hey philipma1957, when is the cut off time for this group buy?

[philipma1957]

Hey philipma1957, when is the cut off time for this group buy?

Time is quick. I would think thurs  5pm east coast time.

This allows shipping on Thursday from blockc

[Biffa]

Phil you have run these before right? How do they compare to say running a SP20 from a power/heat perspective?

Just deciding whether to get get 2 or 1 to replace my two SP20

[talks_cheep]

Phil you have run these before right? How do they compare to say running a SP20 from a power/heat perspective?

Just deciding whether to get get 2 or 1 to replace my two SP20

I'm not philipma but I'd like to chime in since I have both sp20 and a6. To me, A6 offers a perfect replacement opportunity for SP20 from power/heat perspective; my sp20 runs around 1.3 TH consuming about 800 watts, while my A6 runs around 3.5 TH consuming around 900 Watts. Heat wise, they're about the same. So, for about 100 watts more, I'm getting 2.2 TH extra over the SP20. Sound wise, A6 is quieter, but I did replace the A6 stock fan (non-delta) with a Sanyo Denki Ace fan which in my ear produces more pleasing sound than the stock fan in my SP20. A6 is a perfect replacement for an SP20. The build quality is similar. Both SP20 and A6 units exude quality from the moment you open up the box they came in. I'm planning on replacing all my SP20 Jacksons with A6 as soon as I can.

[philipma1957]

Phil you have run these before right? How do they compare to say running a SP20 from a power/heat perspective?

Just deciding whether to get get 2 or 1 to replace my two SP20

I'm not philipma but I'd like to chime in since I have both sp20 and a6. To me, A6 offers a perfect replacement opportunity for SP20 from power/heat perspective; my sp20 runs around 1.3 TH consuming about 800 watts, while my A6 runs around 3.5 TH consuming around 900 Watts. Heat wise, they're about the same. So, for about 100 watts more, I'm getting 2.2 TH extra over the SP20. Sound wise, A6 is quieter, but I did replace the A6 stock fan (non-delta) with a Sanyo Denki Ace fan which in my ear produces more pleasing sound than the stock fan in my SP20. A6 is a perfect replacement for an SP20. The build quality is similar. Both SP20 and A6 units exude quality from the moment you open up the box they came in. I'm planning on replacing all my SP20 Jacksons with A6 as soon as I can.

This  is pretty good description.

I have 11 Sanyo Denki Ace fans from this order

http://www.amazon.com/gp/product/B00YOC80IO?

I will give  8  away (keep 3 for me)  as  they fit in the box and are superior to the stock fan in version 2.

[HerbPean]

Phil, Kilo you have stop with those buy group as I always want to buy more.

Bitfury's chips scares me at the moment.

It's a great price for a great device IMO.

[tlhIlwI]

Add me to the list for one please.

[Mikestang]

Add me to the list for 1, it's time I add a current generation piece of gear to my collection.  The price here is right, it's less than the S7, and I would rather support Avalon than Bitmain.  I am looking to start hosting gear, this might be a good piece to start with.

I assume you will contact us with payment instructions?  Thanks, Phil.

[philipma1957]

Add me to the list for 1, it's time I add a current generation piece of gear to my collection.  The price here is right, it's less than the S7, and I would rather support Avalon than Bitmain.  I am looking to start hosting gear, this might be a good piece to start with.

I assume you will contact us with payment instructions?  Thanks, Phil.

I will start asking for btc to the avalon address in my signature profile


Avalon6 Group Buy - 1BHKKrAh5oTacQnmjfACXjE9cGyFRR8rVD


https://bitcointalk.org/index.php?action=profile;u=64507

[pikachuy]

Hey philipma1957, include me for +1 for this group buy please. Thanks.

[HagssFIN]

Hi Phil,

I'm in for one, if it is reasonable and possible to ship to Finland.

[philipma1957]

Hi Phil,

I'm in for one, if it is reasonable and possible to ship to Finland.

pm me a city and a postal code I will see how much it costs.

@ biffa

same thing pm me a postal code and your city in the uk

[Biffa]

Hi Phil,

I'm in for one, if it is reasonable and possible to ship to Finland.

pm me a city and a postal code I will see how much it costs.

@ biffa

same thing pm me a postal code and your city in the uk

OK change my order to two.

As for postage. I'll pm you.

[talks_cheep]

Am I supposed to pm philipma or wait for him to pm me with payment instruction? I'm so confused.