th00ber (OP)
|
|
January 18, 2017, 12:08:52 PM Last edit: January 18, 2017, 12:20:21 PM by th00ber |
|
ouch sorry i add it in cmd. but i think this options --log yet not implemented or not documented in --help miner`s screen
So it's just --log in the command ? And it produce a log file ? What is the name of the generated file ? I need details as I can't test ... I don't own NVIDIA cards
|
|
|
|
bughatti
|
|
January 18, 2017, 01:16:51 PM |
|
so its --log 1 or 2 1 is for errors only 2 is everything. below is mine
my bat file is miner --server zcl.suprnova.cc --user bughatti.bughatti --pass password --port 4042 --log 2
Here is his -help +---------------------------------+ | EWBF's Zcash CUDA miner. 0.2.0b | +---------------------------------+ --help, -h Show this help. --server Stratum server only hostname or ip address. --port Stratum server port. --user Stratum user. --pass Stratum password. --cuda_devices Space-separated list of cuda devices. Without this option all devices are used. --solver Disable benchmark and use specified solver Allowed values from 0 to 3. --eexit Exit in case of error. Value 1 exit if miner cannot restart workers. Value 2 if lost connection with the pool. 3 both cases. --log Create file miner.log in directory of miner. Allowed values 1 and 2. 1 only errors, 2 will repeat console output. Example1: miner --server server.com --port 7777 --user name --pass secret --cuda_devices 0 1 2 3 --eexit 1 Example2: miner --server server.com --port 7777 --user name --pass secret --eexit 1 --log 2 --solver 1
C:\Users\liquidmine>
INFO: Target: 003c3c3c3c3c3c3c... INFO: Detected new work: 3d7f CUDA: Device: 0 GeForce GTX 1060 3GB, 3072 MB CUDA: Device: 1 GeForce GTX 1060 3GB, 3072 MB CUDA: Device: 2 GeForce GTX 1060 3GB, 3072 MB CUDA: Device: 3 GeForce GTX 1060 3GB, 3072 MB CUDA: Device: 3 Selected solver: 0 CUDA: Device: 0 Selected solver: 0 CUDA: Device: 1 Selected solver: 0 CUDA: Device: 2 Selected solver: 0 INFO 07:13:30: GPU0 Accepted share 140ms [A:1, R:0] INFO: Target: 000fffffffffffff... INFO: Detected new work: 2e19 INFO: Detected new work: 2e19 INFO 07:13:32: GPU3 Accepted share 141ms [A:1, R:0] INFO 07:13:34: GPU3 Accepted share 125ms [A:2, R:0] INFO 07:13:35: GPU1 Accepted share 125ms [A:1, R:0] INFO 07:13:35: GPU1 Accepted share 125ms [A:2, R:0] INFO 07:13:36: GPU1 Accepted share 141ms [A:3, R:0] INFO 07:13:36: GPU2 Accepted share 218ms [A:1, R:0] INFO 07:13:37: GPU3 Accepted share 125ms [A:3, R:0] INFO 07:13:38: GPU3 Accepted share 141ms [A:4, R:0] INFO 07:13:38: GPU2 Accepted share 266ms [A:2, R:0] INFO 07:13:39: GPU3 Accepted share 141ms [A:5, R:0] INFO 07:13:40: GPU1 Accepted share 140ms [A:4, R:0] INFO 07:13:40: GPU1 Accepted share 156ms [A:5, R:0] INFO 07:13:40: GPU3 Accepted share 140ms [A:6, R:0] INFO 07:13:40: GPU3 Accepted share 125ms [A:7, R:0] INFO 07:13:41: GPU2 Accepted share 125ms [A:3, R:0] INFO 07:13:41: GPU3 Accepted share 141ms [A:8, R:0] INFO: Target: 0003c3c3c3c3c3c3... INFO: Detected new work: 3d80 INFO 07:13:58: GPU0 Accepted share 141ms [A:2, R:0] GPU0: 292 Sol/s GPU1: 285 Sol/s GPU2: 267 Sol/s GPU3: 286 Sol/s Total speed: 1130 Sol/s
|
|
|
|
th00ber (OP)
|
|
January 18, 2017, 01:35:35 PM |
|
Thx !
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
January 18, 2017, 02:46:31 PM |
|
Thanks
Could you share your start.bat that I could use it as exemple
Hey, here is my bat file for ZCL @echo off timeout 30 SETX GPU_FORCE_64BIT_PTR 0 SETX GPU_MAX_HEAP_SIZE 100 SETX GPU_USE_SYNC_OBJECTS 1 SETX GPU_MAX_ALLOC_PERCENT 100 SETX GPU_SINGLE_ALLOC_PERCENT 100
:RESTART miner --server zcl.suprnova.cc --user xxxxx --pass x --port 4042 --eexit 3 --log 2 --solver 0 goto :RESTART i used --log 2 that will create same as console log miner.log, i asked EWBF if we could have the capability to create our own log filename. using eexit 3 so that it exit for any reason, and the loop will take on restarting the miner. cheers
|
|
|
|
molitar
|
|
January 18, 2017, 04:45:02 PM |
|
I would like the first dos window that communicates/updates the site be a hidden dos window so only the single dos window is showing at the very least. My preference would be to see the monitor portion to run as a service so do not have to be logged on at all and it could than run hidden.
As it would be running as a windows service the service recovery will make sure that it stays running all the time even when logged off. You can than have your monitor automatically restart miner if has rate goes 0 on any of the GPU's and in worse case trigger a restart of the monitor if that fails.
That would make your service more enticing especially to those who have many rigs.
|
|
|
|
Velgelm
|
|
January 18, 2017, 05:18:09 PM |
|
can u share version for Eqhash (EWBF) ?
|
|
|
|
th00ber (OP)
|
|
January 18, 2017, 05:18:32 PM |
|
Thanks
Could you share your start.bat that I could use it as exemple
Hey, here is my bat file for ZCL @echo off timeout 30 SETX GPU_FORCE_64BIT_PTR 0 SETX GPU_MAX_HEAP_SIZE 100 SETX GPU_USE_SYNC_OBJECTS 1 SETX GPU_MAX_ALLOC_PERCENT 100 SETX GPU_SINGLE_ALLOC_PERCENT 100
:RESTART miner --server zcl.suprnova.cc --user xxxxx --pass x --port 4042 --eexit 3 --log 2 --solver 0 goto :RESTART i used --log 2 that will create same as console log miner.log, i asked EWBF if we could have the capability to create our own log filename. using eexit 3 so that it exit for any reason, and the loop will take on restarting the miner. cheers But with your loop, you can't use the restart or switch option from my tool. Because when the monitorig process will kill the miner, il will be restarted automatically and another one will be started too I'll try too handle that case in the tool
|
|
|
|
th00ber (OP)
|
|
January 18, 2017, 05:19:04 PM |
|
can u share version for Eqhash (EWBF) ?
Not still finished I'm on it
|
|
|
|
Velgelm
|
|
January 18, 2017, 05:22:44 PM |
|
ok thx
|
|
|
|
th00ber (OP)
|
|
January 18, 2017, 06:45:54 PM |
|
EWBF support will be ready for a test in a few minutes
|
|
|
|
|
Velgelm
|
|
January 18, 2017, 07:09:17 PM |
|
thx i will donate you in next 48 hrs
|
|
|
|
bughatti
|
|
January 18, 2017, 07:15:13 PM |
|
Thanks th00ber, i did not have a chance to make it home for lunch so I will give it a try in about 5 hours and let you know how it goes, if someone else has not already replied.
|
|
|
|
th00ber (OP)
|
|
January 18, 2017, 07:37:45 PM |
|
Yes, let me know, if it's OK. As I can't fully test without NVIDIA cards, I bases thé parser on the sample
|
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
January 18, 2017, 08:46:58 PM |
|
Thanks
Could you share your start.bat that I could use it as exemple
Hey, here is my bat file for ZCL @echo off timeout 30 SETX GPU_FORCE_64BIT_PTR 0 SETX GPU_MAX_HEAP_SIZE 100 SETX GPU_USE_SYNC_OBJECTS 1 SETX GPU_MAX_ALLOC_PERCENT 100 SETX GPU_SINGLE_ALLOC_PERCENT 100
:RESTART miner --server zcl.suprnova.cc --user xxxxx --pass x --port 4042 --eexit 3 --log 2 --solver 0 goto :RESTART i used --log 2 that will create same as console log miner.log, i asked EWBF if we could have the capability to create our own log filename. using eexit 3 so that it exit for any reason, and the loop will take on restarting the miner. cheers But with your loop, you can't use the restart or switch option from my tool. Because when the monitorig process will kill the miner, il will be restarted automatically and another one will be started too I'll try too handle that case in the tool Oh yes of course, if you use an external monitoring/action script to kill & restart the miner, no need for the loop, it's the script i use, not to be used with your tool I actually use this sort of loop only with EWBF because of the poor monitoring capabilities (still waiting badly for API or true logging, but API so much better) for others i use API directly for status & kill/restart stuff.
|
|
|
|
bughatti
|
|
January 19, 2017, 12:38:21 AM |
|
Thanks Velgelm works great. A few things unknown to the noobs out there like me, wasnt sure where to put ohm exe, found it works in the root folder, not ohm folder. The 7 sec on the second timeout was not enough for me, I had to change to 15. th00ber, thanks a ton for this I will donate. Curios to know if the page has an auto refresh function, say 30 sec with a timeout if a person does not have that page active http://www.monitorig.com/#?panel=dashboard&id=0180db9329736a693147f05fd2e4119aba43cab7dfea
|
|
|
|
th00ber (OP)
|
|
January 19, 2017, 12:50:39 AM |
|
Right now it's not auto refreshing to prevent load on server. I'll add this as the server is really stable. Refresh every 3 min (same rate that the client update)
|
|
|
|
bughatti
|
|
January 19, 2017, 05:00:03 AM |
|
Just curious but do you plan to build this for linux at all?
|
|
|
|
th00ber (OP)
|
|
January 19, 2017, 07:45:38 AM |
|
Just curious but do you plan to build this for linux at all?
I'm focusing on windows now because, Linux already had some pre-packaged OS for miners etc ... But for the ones who prefer Windows for the convenience (easy driver install and update, tweaking tool etc ...) There is a lack in the monitoring tool for this plateform ... That's why I build this project ! Maybe in the futur I'll add a linux client, but for now, the main project is for Windows
|
|
|
|
|