Windows mining monitoring tool - v2-BETA [OPEN BETA]

[th00ber]

Hello th00ber,

I just installed the application, and apparently everything is working, however, the client fails to send information to the server and on the website, says that my miner is offline, when i can see that it is running without problems. Any suggestion? What can be wrong?
 



Thanks in advance

Look OK, ... But the client should refresh After 3min, and in your case it don't.
If you close and restart the client, does it read the miner.log and refresh correctly in the next 3min?

Hi ... I closed and reopened the client, and after 3 minutes is still not connected. Do you need that i send you a log? ... I really do not understand that it can be wrong.

I tell you that I'm working with windows 10, I do not know if I have to do anything special because of this.

I hope you can help me.

Thanks and regards,

I PM you

[mrbsk]

after update i have to launch miner and ohm manually because monitorig.exe not doing it 

[th00ber]

after update i have to launch miner and ohm manually because monitorig.exe not doing it 

Weird ... Does it display something suspicious  or error ?

[mrbsk]

after update i have to launch miner and ohm manually because monitorig.exe not doing it 

Weird ... Does it display something suspicious  or error ?

i think that was an firewall issue. Now it starts both of miner and ohm but i faced another problem. Miner sends me an "one of worker stoped.." and that doesn't appears when i start miner manually.

[vydelek]

Please set monitorig SW miner Pascal-SGMINER

Thank you

[th00ber]

Hi guys!
Sorry, I'm a bit busy at home and at work.
I'll try to add some miners support by the end if the week.

Thanks for the feedbacks mates

[gabrielomana]

Hi th00ber, trying to install the application on a new rig, I throw the error of the image. Could you help me please? Thanks in advance

https://i.imgur.com/lWjhprf.jpg

[restless]

Is the monitor able to check/show GPU temps ?

[th00ber]

Hi th00ber, trying to install the application on a new rig, I throw the error of the image. Could you help me please? Thanks in advance

With a fresh install ?

[th00ber]

Is the monitor able to check/show GPU temps ?

Yep, GPU temp are displayed
For exemple : my rigs
http://www.monitorig.com/#?panel=dashboard&id=1086db9224632d26671ab42df5ee1d92bf0187bbdd

[gabrielomana]

Is the monitor able to check/show GPU temps ?

Yep, GPU temp are displayed
For exemple : my rigs
http://www.monitorig.com/#?panel=dashboard&id=1086db9224632d26671ab42df5ee1d92bf0187bbdd

Hi th00ber, it was my error, it turns out that in the config file, I had in the field "rigname", a value different from the PC user name, it was already solved.

However, I have a new problem, although the application starts without problems and apparently sends all the data to the server properly, on the website says that my rig is offline and does not show my current hashrate.

please your help!.

https://i.imgur.com/rBFO0HD.png

Thanks in advance.

Regards.

[bughatti]

Th00ber, I have 3 rigs running now.  One of the rigs is a rx 480 using claymore's zec and in the section that shows a gauge and has total share accepted and rejected I get numbers fine.  On my other rigs with ewbf I have no data on that section, is it something different between claymore and ewbf?

http://www.monitorig.com/#?panel=dashboard&id=0180db9329736a693147f05fd2e4119aba43cab7dfea

Love the tool and I know you have been working hard on it.  Had a few ideas and wanted to see if you had plans to implement

--Section to look at your exchange and possibly buy/sell.  Poloniex and Bittrex have integrated API's that allow a user to trade from.
--Implement Coinbase api for the ability to sell BTC and transfer to cash
--Im sure you have been asked to add more miners, would love to see tpruvot (lbry), excavator and gatelessgate (pasc), I can send you what you need from them
--I have a friend working on a tool to scan whattomine and auto switch miners based on best profitable coins for your rigs.  Not sure if this can be implemented with your's or you have a plan to do something similar in your tool.
--I know you have stated in the past that this is for windows only, would you allow someone to help port it over to linux?
--The ability to inject custom rom's for amd cards, im guessing watttool could do this?
--Use HWinfo instead of OHM, this could provide more extensive data?
--Implement something like MSI afterburner for tuning of gpu cards depending on coin being mined.


I know this is alot so please dont take it as unhappiness with your tool.  For me it works great as is, but with more abilities it could be a competitor against some of the mining OS software out there that is limited.

[th00ber]

Is the monitor able to check/show GPU temps ?

Yep, GPU temp are displayed
For exemple : my rigs
http://www.monitorig.com/#?panel=dashboard&id=1086db9224632d26671ab42df5ee1d92bf0187bbdd

Hi th00ber, it was my error, it turns out that in the config file, I had in the field "rigname", a value different from the PC user name, it was already solved.

However, I have a new problem, although the application starts without problems and apparently sends all the data to the server properly, on the website says that my rig is offline and does not show my current hashrate.

please your help!.

Thanks in advance.

Regards.

PM me your public Id, I'll check the data sent to the server.
Plus we can schedule a teamviewer debug session if you want

[th00ber]

Th00ber, I have 3 rigs running now.  One of the rigs is a rx 480 using claymore's zec and in the section that shows a gauge and has total share accepted and rejected I get numbers fine.  On my other rigs with ewbf I have no data on that section, is it something different between claymore and ewbf?

http://www.monitorig.com/#?panel=dashboard&id=0180db9329736a693147f05fd2e4119aba43cab7dfea

Love the tool and I know you have been working hard on it.  Had a few ideas and wanted to see if you had plans to implement

--Section to look at your exchange and possibly buy/sell.  Poloniex and Bittrex have integrated API's that allow a user to trade from.
--Implement Coinbase api for the ability to sell BTC and transfer to cash
--Im sure you have been asked to add more miners, would love to see tpruvot (lbry), excavator and gatelessgate (pasc), I can send you what you need from them
--I have a friend working on a tool to scan whattomine and auto switch miners based on best profitable coins for your rigs.  Not sure if this can be implemented with your's or you have a plan to do something similar in your tool.
--I know you have stated in the past that this is for windows only, would you allow someone to help port it over to linux?
--The ability to inject custom rom's for amd cards, im guessing watttool could do this?
--Use HWinfo instead of OHM, this could provide more extensive data?
--Implement something like MSI afterburner for tuning of gpu cards depending on coin being mined.


I know this is alot so please dont take it as unhappiness with your tool.  For me it works great as is, but with more abilities it could be a competitor against some of the mining OS software out there that is limited.

Thanks for the feedbacks

Those idea are cool, I'll try to add some If it is possible
For the linux port, why not, but I really need to focus on the windows version to finish it.
But right now I had few free time to spend on the project, It will be better in march, I will have lot of time to work on the project

For HWINFO, the integrable solution (SDK API) is not free
So I stick to OpenhardwareMonitor for the moment
https://www.hwinfo.com/sdk.php

[shvetsv]

Please add support Optiminer

[th00ber]

I just create a TODO list to note all the things I had to check : https://trello.com/b/fG4QV3Uq/monitorig

[bughatti]

I just create a TODO list to note all the things I had to check : https://trello.com/b/fG4QV3Uq/monitorig

Cool, thanks th00ber, keep up the great work!

[p0lzl]

Testing the monitor since 24h. Seems pretty good. Would like to have access to the advanced features.

http://www.monitorig.com/#?panel=dashboard&id=0e86db9e206570713e42e91bd2e4119aba43cab7dfea

[th00ber]

My bad !! 

I forgot to automatically extend the duration for the newly created account.
Thanks for the feedback, I just fix your account and fix the creation function

[granrus]

Register on the site, I try to login with a private key, but nothing happens.
P.S.1 >now works


after start monitorig.exe

https://s22.postimg.org/klj6dv9ht/monitorig.png
windows 10