Windows mining monitoring tool - v2-BETA [OPEN BETA]

[mike2246]

Just installed on a few machine's all of my claymore-eth PC's work great, my two ZEC's both mine and report to the pool website but do not show up on the dashboard for Monitorig I've tried using ZM and ewbf. For ZM I'm using dstm 0.6.0 and for ewbf using 0.3.4

Yep, it should be ok.
I personnaly used ewbf.
Is there error or message ?

Here's Pics, not sure if there is a log file. Config RIG ID Matches website RIG ID
https://unsee.cc/a7d8387c/

The link of your screenshot is broken :S

Try these
https://ibb.co/df48sc
https://ibb.co/ipUxkx

[th00ber]

Just installed on a few machine's all of my claymore-eth PC's work great, my two ZEC's both mine and report to the pool website but do not show up on the dashboard for Monitorig I've tried using ZM and ewbf. For ZM I'm using dstm 0.6.0 and for ewbf using 0.3.4

Yep, it should be ok.
I personnaly used ewbf.
Is there error or message ?

Here's Pics, not sure if there is a log file. Config RIG ID Matches website RIG ID
https://unsee.cc/a7d8387c/

The link of your screenshot is broken :S

Try these
https://ibb.co/df48sc
https://ibb.co/ipUxkx

--logfile in the zm start.bat ? Is the zm.log ok ?

[mike2246]

Just installed on a few machine's all of my claymore-eth PC's work great, my two ZEC's both mine and report to the pool website but do not show up on the dashboard for Monitorig I've tried using ZM and ewbf. For ZM I'm using dstm 0.6.0 and for ewbf using 0.3.4

Yep, it should be ok.
I personnaly used ewbf.
Is there error or message ?

Here's Pics, not sure if there is a log file. Config RIG ID Matches website RIG ID
https://unsee.cc/a7d8387c/

The link of your screenshot is broken :S

Try these
https://ibb.co/df48sc
https://ibb.co/ipUxkx

--logfile in the zm start.bat ? Is the zm.log ok ?

Added --logfile and now the 2 PC's show up in the Dashboard but say not mining, however they are both mining and the logfile that showed up in the ZM Folder shows connected to the pool and then a bunch of lines with the hashrates.

[th00ber]

Send me the log file please

[zeii]

Send me the log file please

Do you get my log file?

[mike2246]

Send me the log file please

How do I send the log file since I can't attach documents?

[th00ber]

Send me the log file please

How do I send the log file since I can't attach documents?

th00ber.monitorig@gmail.com

[th00ber]

Send me the log file please

Do you get my log file?

Nope, send me an email to the monitorig address

[th00ber]

TELEGRAM BOT V1

Look for "Monitorig Mining Bot" in telegram 

/register to bind your account to the telegram bot chat
/dashboard to have an simple overview of your hashrate


After the registration, offline rigs notifications are automatically sent to email and telegram

It's a first version of the bot, I'll improve it later

[Makreliak]

Hi, just got a strange error message, monitorig.com dashboard was not once updated, instead of that monitorig batch on the rig said something "ETIMEDOUT 51.255.201.53". Any idea what that could be ? Thanks

[th00ber]

Hi, just got a strange error message, monitorig.com dashboard was not once updated, instead of that monitorig batch on the rig said something "ETIMEDOUT 51.255.201.53". Any idea what that could be ? Thanks

No :S
Any other informations ?

[Makreliak]

Hi, just got a strange error message, monitorig.com dashboard was not once updated, instead of that monitorig batch on the rig said something "ETIMEDOUT 51.255.201.53". Any idea what that could be ? Thanks

No :S
Any other informations ?

No sorry, the dumbest idea was to write down the IP and not printscreen it    ..nevertheless i havent seen it since then.

I found out the issue with the temp on CPU...on Celeron G3930 its not showing in the OHM..G3900 is okay. Any idea on fix ? HWMonitor by CPUID works great.

[zenonramon]

The miner is currently running, logging good and hashing. But the monitorig doesnt recognize the hashrate on the logfile. I've updated to the last Claymore for XMR. Any advice?

[th00ber]

Right now I have to stick with OpenHardwareMonitor because it's one of the few (maybe the only one) I can easily query.
HWInfo also has an API SDK, but it's not free.

[th00ber]

The miner is currently running, logging good and hashing. But the monitorig doesnt recognize the hashrate on the logfile. I've updated to the last Claymore for XMR. Any advice?

Mail me the log file please on th00ber.monitorig<AT>gmail.com (the same address you receive your account info)

[th00ber]

Update V2.0.0-16
Bminer now supported !

But be sure to add -api 127.0.0.1:1880 on the start.bat to run with the API mode "on"

[YoEugene]

Hi @th00ber, thank you for the great software.

Just one question... I have 3 rigs and one of them doesn't display GPU information(temperature/clock etc)

screenshot as below.
https://i.imgur.com/hSLF6EJ.png

Can you help me on this issue? would be very thankful.

[th00ber]

Hi @th00ber, thank you for the great software.

Just one question... I have 3 rigs and one of them doesn't display GPU information(temperature/clock etc)

screenshot as below.

Can you help me on this issue? would be very thankful.

OpenHardwareMonitorig is running ?
It can be because of a problem with the WMI database in your Windows


1- STEP 1 - Test the powershell scripting capability

http://www.monitorig.com/download/powershell_debug.zip
(remove debug_hardwareInfos.info file)
run the bat and check if you got some error/warning (you should not having errors)
If no errors, check the file content (debug_hardwareInfos.info) ... If it's  empty, go to step 2

2- STEP 2 - WMI Database integrity
While OperHardwareMonitor is running, it send it's sensors value to the WMI database.
Can you check the sensors values from the WMI databases with https://wmie.codeplex.com/ check the value of the HardwareMonitor sensors
(screenshot : http://imgur.com/a/EQB6z)
If it's blank, it's probably a problem with rights or WMI database

https://msdn.microsoft.com/en-us/library/aa394525(v=vs.85).aspx
in CMD as admin, run the command :
winmgmt /salvagerepository
(if still not ok, test : winmgmt /resetrepository)
If still got problems, go to step 3

3- STEP 3 - Pray the Mining Lord
STEP 1 & 2 did not correct the problem ... Go for a fresh install win 10/Win 7 ?

[YoEugene]

Hi @th00ber, thank you for the great software.

Just one question... I have 3 rigs and one of them doesn't display GPU information(temperature/clock etc)

screenshot as below.

Can you help me on this issue? would be very thankful.

OpenHardwareMonitorig is running ?
It can be because of a problem with the WMI database in your Windows


1- STEP 1 - Test the powershell scripting capability

http://www.monitorig.com/download/powershell_debug.zip
(remove debug_hardwareInfos.info file)
run the bat and check if you got some error/warning (you should not having errors)
If no errors, check the file content (debug_hardwareInfos.info) ... If it's  empty, go to step 2

2- STEP 2 - WMI Database integrity
While OperHardwareMonitor is running, it send it's sensors value to the WMI database.
Can you check the sensors values from the WMI databases with https://wmie.codeplex.com/ check the value of the HardwareMonitor sensors
(screenshot : http://imgur.com/a/EQB6z)
If it's blank, it's probably a problem with rights or WMI database

https://msdn.microsoft.com/en-us/library/aa394525(v=vs.85).aspx
in CMD as admin, run the command :
winmgmt /salvagerepository
(if still not ok, test : winmgmt /resetrepository)
If still got problems, go to step 3

3- STEP 3 - Pray the Mining Lord
STEP 1 & 2 did not correct the problem ... Go for a fresh install win 10/Win 7 ?

Hi @th00ber thanks for reply, I've tried the first step and I got an error like this:
https://i.imgur.com/CG8ZTpW.png

it says (I tried to translate) "Get-WmiObject : The supplier cannot execute the attempted operation. "

On another miner(which works fine that I can read its temp./clock etc) I execute the same bat and I got no error.

Should I goto step2 and step3? I'm not sure because I'm having errors on step1, I'm afraid doing so will cause other bugs.

[th00ber]

It seems that your Windows got a problem for executing Powershell script and execute Get-WmiObject command.
Try to check on Google for some solutions : https://social.technet.microsoft.com/Forums/windowsserver/en-US/9bea0afc-dfc9-45dd-acec-f680fc377847/getwmiobject-cmdlet-failing-with-an-invalidoperation-error?forum=winserverpowershell

But probably a clean install of a fresh Windows should do the trick.
Or you let the rig running like that but you will not have the sensors informations