Windows mining monitoring tool - v2-BETA [OPEN BETA]

[YoEugene]

It seems that your Windows got a problem for executing Powershell script and execute Get-WmiObject command.
Try to check on Google for some solutions : https://social.technet.microsoft.com/Forums/windowsserver/en-US/9bea0afc-dfc9-45dd-acec-f680fc377847/getwmiobject-cmdlet-failing-with-an-invalidoperation-error?forum=winserverpowershell

But probably a clean install of a fresh Windows should do the trick.
Or you let the rig running like that but you will not have the sensors informations

I think I'll have a clean install someday, thanks a lot!

[mike2246]

which miner do I use for neoscrypt with Nvidia Cards?

[th00ber]

which miner do I use for neoscrypt with Nvidia Cards?

There is none supported. But I can try to add one. Wich one you use ?

[th00ber]

Monitorig watchdog

The email alert seems broken (I have tweaked the detection algo when I introduce the telegram notification, but it's not  really good).
I should release a fix by the end of the week.

I'm also on a "low hash trigger", not just "offline/not mining" detection.

[mike2246]

which miner do I use for neoscrypt with Nvidia Cards?

There is none supported. But I can try to add one. Wich one you use ?

CCminerx64 2.2.4 or XMR-stak-win64

Thanks!

[Piolweb]

Good MonitoRig application


Add
calcul $ by Mh/S , day, month and...

Add
Dashbord Min
just 1 line by rig

View image
https://drive.google.com/file/d/1BiMogWACU_HAhuI6lNdSGYRXRlUyxvLY/view?usp=sharing





Thanks!

[sanriopurin]

Hi th00ber, could you please help me out with this problem:

In the "Windows PowerShell" window, I noticed the "updated time" and the "log time" is off by one hour:

##########################################
#  Monitorig v2.0 : Windows RIG Monitor  #
##########################################
----------- Credit to th00ber ------------


           Updated : 20:53:19


[INFO] Sending mining informations to Monitorig server
[ERROR] The miner is not running or is not hashing
{
  hash: 0
  share: 0
  infos: 19:53:13.973 -> main GPUs: 1: 24.644 MH/s (2) 2: 24.873 MH/s (6)
}
[SUCCES] Succesfully updated

I doubled checked the log file, sure enough the log times are behind by one hour (the "Updated" time is the correct local time).

The PowerShell window therefore always reports "miner is not hashing" even though it does pick up something from the log file...

Thanks!

[th00ber]

The miner is displaying 1 hour delay ? Check your rig system timezone ?

[kimtaek]

Interested in mining... i would like to ask if using the mining GPU or CPU or both?

[sanriopurin]

The miner is displaying 1 hour delay ? Check your rig system timezone ?

Yes th00ber, the "miner software" seems to be outputting time that is 1 hour behind.  I'm using Phoenix Miner 2.7c by the way.

The rig system's timezone (which is my computer right here right now) is correct; the Monitorig software's header is picking up the correct time.

The problem seems to lie with Phoenix Miner's timezone then???  I went through their readme, doesn't seem to have anything to do with time/timezone.

[th00ber]

The miner is displaying 1 hour delay ? Check your rig system timezone ?

Yes th00ber, the "miner software" seems to be outputting time that is 1 hour behind.  I'm using Phoenix Miner 2.7c by the way.

The rig system's timezone (which is my computer right here right now) is correct; the Monitorig software's header is picking up the correct time.

The problem seems to lie with Phoenix Miner's timezone then???  I went through their readme, doesn't seem to have anything to do with time/timezone.

Weird, can you ask on the phoenix thread to the dev why is his miner getting the wrong time ?
I'll try to implement a fix and check for the last modified date of the miner log file for your case

[th00ber]

Sos!
Hello, tell me where my mistake is. Rig works, but it's written "offline"
Where to look and what to fix? Any recommendations?

https://armarium.org/u/2018/03/19/d3657c22554a985d3d49591cc2f4cecf.jpg
https://armarium.org/u/2018/03/19/a12c62d88668c68f0b20b99897d57df4.jpg

What miner ? Send me your log file
The client windows is displaying something ?

[monti55]

I installed the monitoring software today and have a question. Why does the website look like this when on my laptop. My laptop is on the same connection as my mining rig. There are no errors on the command windows. Got any ideas?

https://imgur.com/a/cnl4n


Update 1:It works now. I don't know what I did but my dashboard now works. But it doesn't work on my phone. It still get java script text like the picture
Update 2:Now both work. I have no idea why it wasn't working before.

Love the program so far. Would it be possible to add a max temp for each card?

[petterson]

Hi there,

i have a problem when using this tool with zm Miner. The Miner starts fine, but the "Windows Rig Monitor" (PowerShell windows) says

NO MINING INFO FOUND, If the miner just start, wait untill it is initialized
180 sec before next update ...

As I said the miner started, but after way over 180 seconds the Monitor never updates. Even after more than 6 hours...i never see any info in my dashboard

I got it running on an other rig with cast-xmr and it works beautiful! So I would realy like to get it running on both of my rigs...

I use "telemetry" in the start.bat:
zm --server server.domain --port xxxx --user worker.name --telemetry

Any suggestions?

Thanks!

[th00ber]

Hi there,

i have a problem when using this tool with zm Miner. The Miner starts fine, but the "Windows Rig Monitor" (PowerShell windows) says

NO MINING INFO FOUND, If the miner just start, wait untill it is initialized
180 sec before next update ...

As I said the miner started, but after way over 180 seconds the Monitor never updates. Even after more than 6 hours...i never see any info in my dashboard

I got it running on an other rig with cast-xmr and it works beautiful! So I would realy like to get it running on both of my rigs...

I use "telemetry" in the start.bat:
zm --server server.domain --port xxxx --user worker.name --telemetry

Any suggestions?

Thanks!

add --logfile in the start.bat

[petterson]

add --logfile in the start.bat

thanks dude that did the job! Great work!

Are you planning on implementing something like an uptime counter?

[KL0nLutiy1]

Hello, @th00ber, could you, please, add alert notification via telegram?

[Makreliak]

Hi Th00ber, so except the temps on cpu due to the issue with the monitoring tool itself we do not encounter no issue. Great job and thanks for the solution. I still would have two questions:
1. Is there possibility to have GPU # same on web as in rigs? For example clocked cards are 0,1,5 but on web monitorig i see 3,5,6.
The order is same in monitoring OHM, GPUz, atiflash etc. but not in the web.
2. What is the current roadmap or expected timeline for next update, resp. final version?

Thanks for the tool!

[th00ber]

Hello, @th00ber, could you, please, add alert notification via telegram?

It's already done... but the algo is broken and email+telegram are not send.

I'm on it ti rewrite and also add a "low hashrate" trigger

[th00ber]

Hi Th00ber, so except the temps on cpu due to the issue with the monitoring tool itself we do not encounter no issue. Great job and thanks for the solution. I still would have two questions:
1. Is there possibility to have GPU # same on web as in rigs? For example clocked cards are 0,1,5 but on web monitorig i see 3,5,6.
The order is same in monitoring OHM, GPUz, atiflash etc. but not in the web.
2. What is the current roadmap or expected timeline for next update, resp. final version?

Thanks for the tool!

I'll check that