yorll
|
|
June 26, 2016, 12:09:18 PM Last edit: June 26, 2016, 12:23:18 PM by yorll |
|
So after 11 days of mining in the pool I decided to try out the solo mining to get an idea of the difference. With my low grade quad core I was averaging 171 BIC per day in the mining pool. The first 12 hours of solo mining earned me 185 BIC on 4 blocks which is not too bad for the 2.4Ghz system!
Now I have been trying to figure out all of the different settings and there is one this rookie can not figure out.
How do you move the coin from the simple wallet to my main wallet on my computer? I have tried the transfer but keep getting a wrong amount error..
Any feedback would be greatly appreciated!
transfer <number from 0 to 10> <receiver's address> <number of coins> Be sure that receiver's address has no spaces - that may occur if you copy it from somewhere. remember not to use "Ctrl+C" in command line. Use right-click and "paste" command instead. Number of coins should have eight decimal places. <number from 0 to 10> is called "mixin_count" in wallet hap info, which is the number of transactions your is indistinguishable from. This is probably a degree of anonymity, which is described in whitepaper Example: "transfer 0 bickuaZ9ePtFSA6VmxktjR11aSmnrJZu4Sq7yHHCYUuKDyDoS9N9fznYdHEfqtQKDRPJrcmPmRGx5hn G5TKjsbAh59Q32BPQ93 100.00000000" Remember to deduct the fee 0.001
|
|
|
|
AveryWeb
Newbie
Offline
Activity: 27
Merit: 0
|
|
June 26, 2016, 12:28:35 PM Last edit: June 26, 2016, 01:51:58 PM by AveryWeb |
|
So after 11 days of mining in the pool I decided to try out the solo mining to get an idea of the difference. With my low grade quad core I was averaging 171 BIC per day in the mining pool. The first 12 hours of solo mining earned me 185 BIC on 4 blocks which is not too bad for the 2.4Ghz system!
Now I have been trying to figure out all of the different settings and there is one this rookie can not figure out.
How do you move the coin from the simple wallet to my main wallet on my computer? I have tried the transfer but keep getting a wrong amount error..
Any feedback would be greatly appreciated!
transfer <number from 0 to 10> <receiver's address> <number of coins> Be sure that receiver's address has no spaces - that may occur if you copy it from somewhere. remember not to use "Ctrl+C" in command line. Use right-click and "paste" command instead. Number of coins should have eight decimal places. <number from 0 to 10> is called "mixin_count" in wallet hap info, which is the number of transactions your is indistinguishable from. This is probably a degree of anonymity, which is described in whitepaper Example: "transfer 0 bickuaZ9ePtFSA6VmxktjR11aSmnrJZu4Sq7yHHCYUuKDyDoS9N9fznYdHEfqtQKDRPJrcmPmRGx5hn G5TKjsbAh59Q32BPQ93 100.00000000" Remember to deduct the fee 0.001Thank you for that help! I finally got it to send me the coins to my main wallet The issue was I was trying to send the full balance not thinking about the fees!
|
|
|
|
AveryWeb
Newbie
Offline
Activity: 27
Merit: 0
|
|
June 26, 2016, 02:18:09 PM |
|
i would love to get some free bikercoins... Start mining then
|
|
|
|
AveryWeb
Newbie
Offline
Activity: 27
Merit: 0
|
|
June 26, 2016, 02:37:34 PM |
|
Hey all, what the hell is going on with the wallet every time it opens I have changed address. I that someone left food. on the pool I see how much nominal, the purse did not come, because the address is another. examined. if I closed the pool i lost all mined coins !!! what can I do in that situation? that`s abnormal !!! I was mined coins at a certain address, and then he changed when I opening the wallet, and my coins run out at the non-existent address and I still lose? How do I fix a permanent substitution addresses for each new reopening of the wallet?
You really need to provide more information if you want help. From what I have read it appears you might be solo mining using the simplewallet. Are you for one opening the wallet or generating a new wallet when you first start the simplewallet program? If you are opening the old wallet you used last time using the password you setup when you first generated the address are you saving your data before you stop mining? If not that could be a cause as to why you are losing data. If you are generating a new wallet each time you open the program then that is the cause.
|
|
|
|
script-expert (OP)
|
|
June 26, 2016, 02:50:19 PM |
|
25 million coins 0.001 transaction fee
I think transaction fee is big if we see total supply (just is my opinion lol)
Well even at $10.00 per BIC this would be 0.01 transaction. I think this is good. Only issue I see with this fee is that Faucetbox may not add the currency to their site so people can use the coins for running their own faucet. Do you have any plans on offering lower rates based on volume in order to make it a bit more enticing for Faucetbox and others like them to add the currency to their available list? Sorry, The coin wasn't build for micro-payment. 0.001 fee prevent attach on the Network. And Faucetbox is probably not compatible with Cryptonote coins anyway.
|
|
|
|
AveryWeb
Newbie
Offline
Activity: 27
Merit: 0
|
|
June 26, 2016, 03:19:14 PM |
|
If I remember correctly Dash is using the same and they are on Faucetbox. But I was also looking at it that 100K isnt really that bad to be honest heck I pay more then that to send Dash and Litecoin through Holytransaction lol
|
|
|
|
script-expert (OP)
|
|
June 26, 2016, 03:28:34 PM |
|
If I remember correctly Dash is using the same and they are on Faucetbox. But I was also looking at it that 100K isnt really that bad to be honest heck I pay more then that to send Dash and Litecoin through Holytransaction lol
Dash is X11 algo, it's different. Use same calls as Bitcoin to access daemon. Bikercoin use CURL calls to communicate with daemon.
|
|
|
|
bigs21024
Sr. Member
Offline
Activity: 294
Merit: 250
please help gofund.me/bigs21024 Family in need
|
|
June 26, 2016, 03:34:05 PM |
|
pretty neat i am following to see where this goes
|
|
|
|
AveryWeb
Newbie
Offline
Activity: 27
Merit: 0
|
|
June 26, 2016, 06:24:31 PM |
|
pretty neat i am following to see where this goes
You mining while watching lol I have a feeling this coin will be worth at the very least the value of the Litecoin but does have the potential to be worth even more only time will tell!
|
|
|
|
bekasto
|
|
June 26, 2016, 06:44:20 PM |
|
Hey all, what the hell is going on with the wallet every time it opens I have changed address. I that someone left food. on the pool I see how much nominal, the purse did not come, because the address is another. examined. if I closed the pool i lost all mined coins !!! what can I do in that situation? that`s abnormal !!! I was mined coins at a certain address, and then he changed when I opening the wallet, and my coins run out at the non-existent address and I still lose? How do I fix a permanent substitution addresses for each new reopening of the wallet?
You really need to provide more information if you want help. From what I have read it appears you might be solo mining using the simplewallet. Are you for one opening the wallet or generating a new wallet when you first start the simplewallet program? If you are opening the old wallet you used last time using the password you setup when you first generated the address are you saving your data before you stop mining? If not that could be a cause as to why you are losing data. If you are generating a new wallet each time you open the program then that is the cause. what have I to offer if when I close my wallet, and I go back address is another. here you have the screenshots and look at the time. me that love to change every time the address if mining on one? http://prntscr.com/blctoyhttp://prntscr.com/blcur5http://prntscr.com/blcv4n
|
|
|
|
AveryWeb
Newbie
Offline
Activity: 27
Merit: 0
|
|
June 26, 2016, 07:04:19 PM |
|
Hey all, what the hell is going on with the wallet every time it opens I have changed address. I that someone left food. on the pool I see how much nominal, the purse did not come, because the address is another. examined. if I closed the pool i lost all mined coins !!! what can I do in that situation? that`s abnormal !!! I was mined coins at a certain address, and then he changed when I opening the wallet, and my coins run out at the non-existent address and I still lose? How do I fix a permanent substitution addresses for each new reopening of the wallet?
You really need to provide more information if you want help. From what I have read it appears you might be solo mining using the simplewallet. Are you for one opening the wallet or generating a new wallet when you first start the simplewallet program? If you are opening the old wallet you used last time using the password you setup when you first generated the address are you saving your data before you stop mining? If not that could be a cause as to why you are losing data. If you are generating a new wallet each time you open the program then that is the cause. what have I to offer if when I close my wallet, and I go back address is another. here you have the screenshots and look at the time. me that love to change every time the address if mining on one? http://prntscr.com/blctoyhttp://prntscr.com/blcur5http://prntscr.com/blcv4nWow! Now I have never seen a wallet ever do that before. By any chance has the program saved multiple wallet files into that folder on your computer? If so you will be able to open each file in the program to find your original wallet. I am a rookie when it comes to the computer wallets so I have no clue as to what is causing the app to open new wallets everytime you start it.
|
|
|
|
svensel
Newbie
Offline
Activity: 58
Merit: 0
|
|
June 26, 2016, 07:47:28 PM |
|
watching this one
|
|
|
|
bekasto
|
|
June 26, 2016, 08:34:25 PM |
|
Пpивeт, пoчeмy пpи кaждoм зaпycкe кoшeлькa мeняeтcя aдpec, я мaйню нa oднoм , a кoгдa oткpывaeтcя кoшeлeк yжe дpyгoй aдpec, и мoнeты нe пpиxoдят. Чтo зa xpeнь твopитcя?
|
|
|
|
maxiandr
Member
Offline
Activity: 97
Merit: 11
|
|
June 26, 2016, 08:55:42 PM |
|
Пpивeт, пoчeмy пpи кaждoм зaпycкe кoшeлькa мeняeтcя aдpec, я мaйню нa oднoм , a кoгдa oткpывaeтcя кoшeлeк yжe дpyгoй aдpec, и мoнeты нe пpиxoдят. Чтo зa xpeнь твopитcя?
Cтpaннo кoнeчнo, нo y мeня вce нopмaльнo, и aдpec пoлyчeния тoлькo oдин, вce пpиxoдит, пapoль нa кoшeль нe cтaвил. Ecли ecть вoзмoжнocть, пoпpoбyй ycтaнoвить нa дpyгoм кoмпe, нaдo пpoбoвaть, иcкaть пpичинy...
|
|
|
|
script-expert (OP)
|
|
June 26, 2016, 09:00:43 PM |
|
Create a DIR in C:\Program Files\Bikercoin GUI copy all bikercoinwallet.exe and all required files and subdir to C:\Program Files\Bikercoin GUI Start bikercoinwallet.exe - will normally open last wallet. If not open one, all wallets are created in dir below. C:\Users\{username}\AppData\Roaming\bikercoin Close and restart wallet. check if same address. If not reply with Windows version and also state if wallet is sync or start from 1
|
|
|
|
bitcoinkkk
|
|
June 27, 2016, 05:21:33 AM |
|
Create a DIR in C:\Program Files\Bikercoin GUI copy all bikercoinwallet.exe and all required files and subdir to C:\Program Files\Bikercoin GUI Start bikercoinwallet.exe - will normally open last wallet. If not open one, all wallets are created in dir below. C:\Users\{username}\AppData\Roaming\bikercoin Close and restart wallet. check if same address. If not reply with Windows version and also state if wallet is sync or start from 1 CryptoNight: https://www.cryptopia.co.nz/Vote
|
|
|
|
bekasto
|
|
June 27, 2016, 10:57:57 AM |
|
Create a DIR in C:\Program Files\Bikercoin GUI copy all bikercoinwallet.exe and all required files and subdir to C:\Program Files\Bikercoin GUI Start bikercoinwallet.exe - will normally open last wallet. If not open one, all wallets are created in dir below. C:\Users\{username}\AppData\Roaming\bikercoin Close and restart wallet. check if same address. If not reply with Windows version and also state if wallet is sync or start from 1 windows 10
|
|
|
|
script-expert (OP)
|
|
June 27, 2016, 12:32:53 PM |
|
Create a DIR in C:\Program Files\Bikercoin GUI copy all bikercoinwallet.exe and all required files and subdir to C:\Program Files\Bikercoin GUI Start bikercoinwallet.exe - will normally open last wallet. If not open one, all wallets are created in dir below. C:\Users\{username}\AppData\Roaming\bikercoin Close and restart wallet. check if same address. If not reply with Windows version and also state if wallet is sync or start from 1 windows 10 You are not giving me much to work with. Is {username} in C:\Users\{username}\AppData\Roaming\bikercoin in non latin characters? Try to /File/Create Wallet use latin characters only If this doesn't work and {username} is non latin characters you will need to create new user UTF-8 latin characters.
|
|
|
|
bekasto
|
|
June 27, 2016, 03:23:46 PM |
|
Create a DIR in C:\Program Files\Bikercoin GUI copy all bikercoinwallet.exe and all required files and subdir to C:\Program Files\Bikercoin GUI Start bikercoinwallet.exe - will normally open last wallet. If not open one, all wallets are created in dir below. C:\Users\{username}\AppData\Roaming\bikercoin Close and restart wallet. check if same address. If not reply with Windows version and also state if wallet is sync or start from 1 windows 10 You are not giving me much to work with. Is {username} in C:\Users\{username}\AppData\Roaming\bikercoin in non latin characters? Try to /File/Create Wallet use latin characters only If this doesn't work and {username} is non latin characters you will need to create new user UTF-8 latin characters. what do you want me to provide all the names I have in English? I come home from work and put as you say, how me coins back to the purse? what I nominal to a single address
|
|
|
|
Nik4691
|
|
June 27, 2016, 03:41:45 PM |
|
what do you want me to provide all the names I have in English? I come home from work and put as you say, how me coins back to the purse? what I nominal to a single address
Do you put the same password as the first time? If not, it will create a new wallet with a new address every time.
|
|
|
|
|