IOTA MADE MORE THEN 1 000 000 TX!!! FANTASTIC !!! SOON ON EXCHANGES!!!

[iotatoken]

So the github says that in this release you can generate address. But when I go to "receive" and "generate address", it keeps generating.. How long is it supposed to take to generate an address? Or is that not working?

It is working. It depends on your hw - e.g. mine took 2mins with i7 cpu

It needs POW for generation, that's why it's CPU intensive

In your case did the "generating address" part disappear? For me its still generating address but if I look in history and click 'addresses' then it shows something there and 25/06 in big numbers. But the receive section still says "generating address" and its been at least 10 minutes.

I'm on a Macbook Pro 2015.

Hmm, join our chat at http://chat.iotatoken.com and it'll be easier to help you out.

[hellsingfan]

So the github says that in this release you can generate address. But when I go to "receive" and "generate address", it keeps generating.. How long is it supposed to take to generate an address? Or is that not working?

It is working. It depends on your hw - e.g. mine took 2mins with i7 cpu

It needs POW for generation, that's why it's CPU intensive

In your case did the "generating address" part disappear? For me its still generating address but if I look in history and click 'addresses' then it shows something there and 25/06 in big numbers. But the receive section still says "generating address" and its been at least 10 minutes.

I'm on a Macbook Pro 2015.

Hmm, join our chat at http://chat.iotatoken.com and it'll be easier to help you out.

I did 5 mins ago., mine are the last posts on the iotatesting channel.

[oldisoft]

So the github says that in this release you can generate address. But when I go to "receive" and "generate address", it keeps generating.. How long is it supposed to take to generate an address? Or is that not working?

It depends on you CPU

at usually generating an address is going in less 1 min, but at first I have to sync with network! It could take few hours.

Cheers

[hellsingfan]

So the github says that in this release you can generate address. But when I go to "receive" and "generate address", it keeps generating.. How long is it supposed to take to generate an address? Or is that not working?

It depends on you CPU

at usually generating an address is going in less 1 min, but at first I have to sync with network! It could take few hours.

Cheers

I closed and reopened and regenerated the address and it did.

It generated the address and had the QR code, after that I closed my wallet and re-ran it, now in the Receive section the QR code / address isn't there but the I can still see it in history. Is this a bug or is that how its supposed to behave? The Receive section only has the "generate address button" not the QR / address anymore after restarting.

I asked in chat and CFB said thats how it is supposed to be. I think this is bad design:

1. This means Receive section is only for generating new address, it doesn't 'display' address after restarting. And there is no QR code visible after closing
2. The "History" section is only place you see the address it should technically be in receive.

[oldisoft]

So the github says that in this release you can generate address. But when I go to "receive" and "generate address", it keeps generating.. How long is it supposed to take to generate an address? Or is that not working?

It depends on you CPU

at usually generating an address is going in less 1 min, but at first I have to sync with network! It could take few hours.

Cheers

I closed and reopened and regenerated the address and it did.

It generated the address and had the QR code, after that I closed my wallet and re-ran it, now in the Receive section the QR code / address isn't there but the I can still see it in history. Is this a bug or is that how its supposed to behave? The Receive section only has the "generate address button" not the QR / address anymore after restarting.

I asked in chat and CFB said thats how it is supposed to be. I think this is bad design:

1. This means Receive section is only for generating new address, it doesn't 'display' address after restarting. And there is no QR code visible after closing
2. The "History" section is only place you see the address it should technically be in receive.

Now sending IOTAs is disable but on the second stage will open. (have a look on first post)

you can receive to one address just ones after you must generate new address - this is security reason, not a bad design.

[hellsingfan]

So the github says that in this release you can generate address. But when I go to "receive" and "generate address", it keeps generating.. How long is it supposed to take to generate an address? Or is that not working?

It depends on you CPU

at usually generating an address is going in less 1 min, but at first I have to sync with network! It could take few hours.

Cheers

I closed and reopened and regenerated the address and it did.

It generated the address and had the QR code, after that I closed my wallet and re-ran it, now in the Receive section the QR code / address isn't there but the I can still see it in history. Is this a bug or is that how its supposed to behave? The Receive section only has the "generate address button" not the QR / address anymore after restarting.

I asked in chat and CFB said thats how it is supposed to be. I think this is bad design:

1. This means Receive section is only for generating new address, it doesn't 'display' address after restarting. And there is no QR code visible after closing
2. The "History" section is only place you see the address it should technically be in receive.

Now sending IOTAs is disable but on the second stage will open. (have a look on first post)

you can receive to one address just ones after you must generate new address - this is security reason, not a bad design.

each transaction requires another address? By the way I see 2 addresses in my history. How can we know if an address is useable or not? I mean how do I know if the first address which generated in my history is usable for transaction?

[oldisoft]

each transaction requires another address? By the way I see 2 addresses in my history. How can we know if an address is useable or not? I mean how do I know if the first address which generated in my history is usable for transaction?

If you are not sure just make another new address for new transaction

Cheers

[jokumat]

@oldisoft

Topic: IOTA GUI and Launch date - 11 JUNE

July

[oldisoft]

@oldisoft

Topic: IOTA GUI and Launch date - 11 JUNE

July

Exactly You are right!

The official launch date of IOTA will occur on July 11  IOTA  http://iotatoken.com/

[oldisoft]

Have a look and test New IOTA node here:


https://github.com/IOTAledger/iota-gui-beta/releases/tag/0.9.23-c


Cheers

[oldisoft]

Have a look and test New IOTA node here:


https://github.com/IOTAledger/iota-gui-beta/releases/tag/0.9.23-c


Cheers

Please! Do not forget claim your IOTAs before deadline!!!

Cheers

[oldisoft]

v0.9.23 IMPROVEMENTS TO GUI BETA

This version improves upon the previous one by fixing some of the bugs and making the overall process of installing and claiming smoother.

Opening server folder no longer results in crash.
Opening links in menu no longer results in crash on some systems.
Server log is shown in initialization alert dialog.
Initialization alert dialog adds option to download java 64 bit if the user has a 64 bit system, but has only 32-bit java installed.
Better failure handling of java downloading.
Remove whtiespace automatically from server nodes list, as well as make sure all entries are unique.
If there was en error in the config file, resulting in initialization alert dialog, a button is shown to view the config file on your computer.
If Java arguments are deleted from the initialization alert dialog, make sure that they stay deleted. (Bug)
rebroadcast button added to the UI.
32 and 64-bit windows are now combined in a single installer.
Please join https://chat.iotatoken.com for more dedicated support.

[ButtCrack]

Have a look and test New IOTA node here:


https://github.com/IOTAledger/iota-gui-beta/releases/tag/0.9.23-c


Cheers

Get following error on WinXP SP3 :
"IOTA Wallet.exe is not a valid win32 application"

[connexus]

Have a look and test New IOTA node here:


https://github.com/IOTAledger/iota-gui-beta/releases/tag/0.9.23-c


Cheers

Get following error on WinXP SP3 :
"IOTA Wallet.exe is not a valid win32 application"

Probably the IOTA wallet application was design for windows 64bit only.

[gernat]

@connexus: No. Not only for x64.

@ButtCrack: Try this one:
github.com/IOTAledger/iota-gui-beta/releases/download/0.9.23-c/IOTA.Wallet.Setup.0.9.23-c.exe

or
github.com/IOTAledger/iota-gui-beta/releases/download/0.9.23/IOTA.Wallet.Setup.0.9.23-b-ia32.exe

Incidentally, unfortunately it is not really safe to use XP. I would recommend either Ubuntu (Linux) or Windows 7.

[gernat]

Here is the link of the official website:
http://forum.iotatoken.com/t/iota-gui-and-launch-date/379

[oldisoft]

Have a look and test New IOTA node here:


https://github.com/IOTAledger/iota-gui-beta/releases/tag/0.9.23-c


Cheers

Get following error on WinXP SP3 :
"IOTA Wallet.exe is not a valid win32 application"

Please feel free to ask any questions about IOTA in our about 24/24 online chat here as well:

http://chat.iotatoken.com/channel/releases

Cheers

[adamvp]

How to obtain IOTA assets?

[oldisoft]

How to obtain IOTA assets?

Have no idea about IOTA assets.

You can have a look here - if somebody still  selling real IOTAs:

https://bitcointalk.org/index.php?topic=1440112.820

Or you can wait till launch 11 JULY 2016 and buy on all main exchanges IOTAs!

Cheers

[oldisoft]

You don't need to claim again if you have already claimed your IOTAs

Would you be kind enough) to go to the http://chat.iotatoken.com/channel/iotatesting and you will find lovely list of 7 nodes if you need them.

Cheers