PPOC
|
|
August 19, 2016, 05:20:07 AM |
|
Trying to get 6 X Sapphire RX480 going on H81 MB, tried win10 and win7. After driver install and after reboot, fails to post. Nada, black screen sometime or BSOD. Even with just one card plugged in on a power riser. Only if I unplug the card will it boot into OS. Thought it was my MB, but I see many 480's running on these boards. I even ordered the H97 Anniversary, thinking its my MB, has not come in yet but Any suggestions?
|
BTC: 1Bo6YsPeHCrVRygHLJg9BwHeaLSQpppcJi "Lost coins only make everyone else’s coins worth slightly more. Think of it as a donation to everyone."
|
|
|
PPOC
|
|
August 19, 2016, 05:22:58 AM |
|
I am running 3x Sapphire RX 480 8GB, all very stable at 27.3 MH/s each ETH & 546 MH/s DCR ~153w @ each card and temperature is 77C each card. I will try get a bit more out of them, but this setting have been running without any problem for 4 days straight now. (Switched pool about 3 hours ago) I am running them at 1100 Core clock and 2200 Memory clock, Windows 10, Crimson 16.7.1. Does anyone know how many H/s you get from each card on Cryptonight mining with this RX 480 Cards? And what software and settings do you have? 153w dual mining and getting 27.3 on ETH, wow.
|
BTC: 1Bo6YsPeHCrVRygHLJg9BwHeaLSQpppcJi "Lost coins only make everyone else’s coins worth slightly more. Think of it as a donation to everyone."
|
|
|
willi9974
Legendary
Offline
Activity: 3570
Merit: 2821
Escrow Service
|
|
August 19, 2016, 06:20:50 AM |
|
i have the same settings ~1000 watt @wall with 6 cards and systems needs ~100 watt
so i have 900 watt / 6 cards = 150 watt per card by 160 MHs ETH and 333 MHs SIA
|
|
|
|
PPOC
|
|
August 19, 2016, 02:12:39 PM |
|
i have the same settings ~1000 watt @wall with 6 cards and systems needs ~100 watt
so i have 900 watt / 6 cards = 150 watt per card by 160 MHs ETH and 333 MHs SIA
1100 Core clock and 2200 Memory clock, Windows 10, Crimson 16.7.1? Did you change power limit? What MB and PSU you using? Any other changes from stock settings? Powered Risers?
|
BTC: 1Bo6YsPeHCrVRygHLJg9BwHeaLSQpppcJi "Lost coins only make everyone else’s coins worth slightly more. Think of it as a donation to everyone."
|
|
|
willi9974
Legendary
Offline
Activity: 3570
Merit: 2821
Escrow Service
|
|
August 19, 2016, 03:03:58 PM |
|
power limits are not changed, any settings in windows / display driver at stock riser are unpowerd Mainboard: Asrock H61 BTC PSU: Enermax MAXREVO EMR1200EWT 80 PLUS Gold OS Windows 10 AMD Treiber Radeon-Software-Crimson-Edition-16.7.2 GPU MHz 1000 GPU Voltage 900 MEM MHz 2200 MEM Voltage 900
|
|
|
|
PPOC
|
|
August 19, 2016, 05:08:37 PM Last edit: August 19, 2016, 05:40:59 PM by PPOC |
|
power limits are not changed, any settings in windows / display driver at stock riser are unpowerd Mainboard: Asrock H61 BTC PSU: Enermax MAXREVO EMR1200EWT 80 PLUS Gold OS Windows 10 AMD Treiber Radeon-Software-Crimson-Edition-16.7.2 GPU MHz 1000 GPU Voltage 900 MEM MHz 2200 MEM Voltage 900
What are you using to manage the setting? Wattman?
|
BTC: 1Bo6YsPeHCrVRygHLJg9BwHeaLSQpppcJi "Lost coins only make everyone else’s coins worth slightly more. Think of it as a donation to everyone."
|
|
|
willi9974
Legendary
Offline
Activity: 3570
Merit: 2821
Escrow Service
|
|
August 19, 2016, 06:05:36 PM |
|
yes, with mattman
|
|
|
|
Havane
Jr. Member
Offline
Activity: 76
Merit: 3
|
|
September 05, 2016, 10:15:56 PM |
|
My stats on a Sapphire Radeon RX 480 Nitro+ OC - 8 Go 26,7 Mh/s , after 24 hoursWin 10 + crimson 16.8.2 Claymore 6.4 solo mining GPU : 1000 Mhz Mem : 2250 Mhz @ 1150 mVany advice is welcome
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4256
Merit: 8572
'The right to privacy matters'
|
|
September 05, 2016, 11:43:52 PM |
|
yes, with mattman
auto correct sucks I use watt man pesky autocorrect ------------------------------------------------------------ hey how many are trying some xmr instead of eth I have 13 cards to eth I have 8 cards to xmd ------------------------------------------------------------- @ Havane why choose solo mining? 26.7mh needs a long time to hit a block ether miner pool is good http://ethermine.org/
|
|
|
|
Havane
Jr. Member
Offline
Activity: 76
Merit: 3
|
|
September 06, 2016, 06:06:58 AM |
|
@ Havane why choose solo mining? 26.7mh needs a long time to hit a block ether miner pool is good http://ethermine.org/Solo mining to know what's the max I can reatch on ether mining. I use nanopool
|
|
|
|
Ambros
|
|
September 06, 2016, 06:33:51 AM |
|
yes, with mattman
auto correct sucks I use watt man pesky autocorrect ------------------------------------------------------------ hey how many are trying some xmr instead of eth I have 13 cards to eth I have 8 cards to xmd ------------------------------------------------------------- @ Havane why choose solo mining? 26.7mh needs a long time to hit a block ether miner pool is good http://ethermine.org/I have some reference 480 in ETH, what's hashrate on XMR ? Is more profitable than ETH (considering instant coin sell)?
|
|
|
|
melsell1
Newbie
Offline
Activity: 50
Merit: 0
|
|
September 06, 2016, 11:48:13 AM |
|
A) intel i5 2500k in a gigabyte p67 mobo 2 sticks of 4gb 1333mhz ram B) 29+mh on ethermine.org and 321mh siamining.com C) bat file = EthDcrMiner64.exe -dbg -1 -ethi 6 -epool eu1.ethermine.org:4444 -ewal ETHWALLET -epsw x -eworker AMD -dpool stratum+tcp://siamining.com:7777 -dwal CIAWALLET.AMD -dcoin sia -allpools 1 -dcri 22 D) Windows 10 x64, claymores dualminer, amd driver 16.8.3 E) -48mv gpu 1125 memory 2000 fan auto temps 51c msi afterburner F) mining watts 190-200 no mining 60 watts so mining cost is ~140 watts for 1 Sapphire RX 480 Nitro+ 8g with home made bios http://www.upload.ee/image/6137711/rx480.jpg
|
|
|
|
ps_jb
|
|
September 06, 2016, 12:25:07 PM |
|
A) intel i5 2500k in a gigabyte p67 mobo 2 sticks of 4gb 1333mhz ram B) 29+mh on ethermine.org and 321mh siamining.com C) bat file = EthDcrMiner64.exe -dbg -1 -ethi 6 -epool eu1.ethermine.org:4444 -ewal ETHWALLET -epsw x -eworker AMD -dpool stratum+tcp://siamining.com:7777 -dwal CIAWALLET.AMD -dcoin sia -allpools 1 -dcri 22 D) Windows 10 x64, claymores dualminer, amd driver 16.8.3 E) -48mv gpu 1125 memory 2000 fan auto temps 51c msi afterburner F) mining watts 190-200 no mining 60 watts so mining cost is ~140 watts for 1 Sapphire RX 480 Nitro+ 8g with home made bios Did you tune your card with MSI Afterburner?
|
|
|
|
melsell1
Newbie
Offline
Activity: 50
Merit: 0
|
|
September 06, 2016, 01:05:56 PM |
|
A) intel i5 2500k in a gigabyte p67 mobo 2 sticks of 4gb 1333mhz ram B) 29+mh on ethermine.org and 321mh siamining.com C) bat file = EthDcrMiner64.exe -dbg -1 -ethi 6 -epool eu1.ethermine.org:4444 -ewal ETHWALLET -epsw x -eworker AMD -dpool stratum+tcp://siamining.com:7777 -dwal CIAWALLET.AMD -dcoin sia -allpools 1 -dcri 22 D) Windows 10 x64, claymores dualminer, amd driver 16.8.3 E) -48mv gpu 1125 memory 2000 fan auto temps 51c msi afterburner F) mining watts 190-200 no mining 60 watts so mining cost is ~140 watts for 1 Sapphire RX 480 Nitro+ 8g with home made bios http://www.upload.ee/image/6137711/rx480.jpgDid you tune your card with MSI Afterburner? Yes but voltage controll is not working there.
|
|
|
|
Yaminat
|
|
September 20, 2016, 04:43:29 PM |
|
A) intel i5 2500k in a gigabyte p67 mobo 2 sticks of 4gb 1333mhz ram B) 29+mh on ethermine.org and 321mh siamining.com C) bat file = EthDcrMiner64.exe -dbg -1 -ethi 6 -epool eu1.ethermine.org:4444 -ewal ETHWALLET -epsw x -eworker AMD -dpool stratum+tcp://siamining.com:7777 -dwal CIAWALLET.AMD -dcoin sia -allpools 1 -dcri 22 D) Windows 10 x64, claymores dualminer, amd driver 16.8.3 E) -48mv gpu 1125 memory 2000 fan auto temps 51c msi afterburner F) mining watts 190-200 no mining 60 watts so mining cost is ~140 watts for 1 Sapphire RX 480 Nitro+ 8g with home made bios Did you tune your card with MSI Afterburner? Yes but voltage controll is not working there. You might try other GPU tuning software. One example is the Sapphire Trixx. It worked well on the voltage tuning.
|
|
|
|
BitJunkie556
|
|
December 25, 2016, 04:44:35 AM |
|
here is a set of photos with me trying sapphire trixx on an r9 390 1 r9 390 and the rig pulls 216 watts the rig drops to 32-34 watts once I turn the mining off so 182-184 is for mining I am impressed with sapphire trixx I am doing a -163mv undervolt tiny gpu overclock 1023 vs stock 1015 memory 1000MHz which reads as 4000MHz fan at 40% gpu temps are 61c and vrm = 73c quiet pulling 25.9 hash rate i thought this was a 480 thread? anyeays ive never seen an undervolt that low hard to belive thats stable Well I just got it going today on sapphire trixx so far it is running if she crashes I will let you know. As for this being a rx 480 thread my first two come on tues they will be posted. I have a pair of xfx coming on tues then a pair of sapphires coming on the 11th That's actually just the info I needed Phil (on the RX 480's I mean). Thanks a lot man. Looking forward to it.
|
|
|
|
BitJunkie556
|
|
December 25, 2016, 04:49:05 AM |
|
Trying to get 6 X Sapphire RX480 going on H81 MB, tried win10 and win7. After driver install and after reboot, fails to post. Nada, black screen sometime or BSOD. Even with just one card plugged in on a power riser. Only if I unplug the card will it boot into OS. Thought it was my MB, but I see many 480's running on these boards. I even ordered the H97 Anniversary, thinking its my MB, has not come in yet but Any suggestions?
That's really strange. I have 4 RX 480's (just added a 5th) on the H81 board with 4gb cheapo ram and a G1820 CPU on Windows 10. Runs pretty well. What's your PSU? I'm using a Rosewill Photon 1050, which certainly is nowhere near the best, but it's been running good for quite a while now. I'm using 16.11.5 driver on all my rigs at the moment and they're running just right. However, I did install other drivers on one of my rigs at some point and if I remember correctly, I had similar issues to what you're talking about. Well, not failing to post, but I was getting crazy BSOD's to the point that I could not login and needed to reinstall Win 10. But Windows 10 will put you at like 16.6 and I just install 16.11.5 and I'm up and running. I wish I had more info to give, but that's been my process and it's been alright so far. At the end of the day, it could be your board. You wouldn't be the first person with a bad H81 board. Just read around.
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4256
Merit: 8572
'The right to privacy matters'
|
|
December 25, 2016, 05:01:50 AM |
|
Trying to get 6 X Sapphire RX480 going on H81 MB, tried win10 and win7. After driver install and after reboot, fails to post. Nada, black screen sometime or BSOD. Even with just one card plugged in on a power riser. Only if I unplug the card will it boot into OS. Thought it was my MB, but I see many 480's running on these boards. I even ordered the H97 Anniversary, thinking its my MB, has not come in yet but Any suggestions?
That's really strange. I have 4 RX 480's (just added a 5th) on the H81 board with 4gb cheapo ram and a G1820 CPU on Windows 10. Runs pretty well. What's your PSU? I'm using a Rosewill Photon 1050, which certainly is nowhere near the best, but it's been running good for quite a while now. I'm using 16.11.5 driver on all my rigs at the moment and they're running just right. However, I did install other drivers on one of my rigs at some point and if I remember correctly, I had similar issues to what you're talking about. Well, not failing to post, but I was getting crazy BSOD's to the point that I could not login and needed to reinstall Win 10. But Windows 10 will put you at like 16.6 and I just install 16.11.5 and I'm up and running. I wish I had more info to give, but that's been my process and it's been alright so far. At the end of the day, it could be your board. You wouldn't be the first person with a bad H81 board. Just read around. This was a very old post you replied to. Most,info,here is out,of,date. I am locking thread.
|
|
|
|
|