The software by default is set in the software for the miner 192.168.0.100 and you have to set your PC to Access it to to 192.168.0.1
then any browser type 192.168.0.100 then change the ip on the miner to either DHCP or 192.168.1.100 , I'm not to sure what your network is set to .
not sure what you mean the miner is not there does the USB converter from the IO cable to the USB cable turn blue then green or red or light up at all it might be a bad converter or the uart or this
http://bitcoinist.net/review-avalon-4-1-1-ths-bitcoin-asic-miner-quiet-power/#jp-carousel-13904 working. I know that says 4.1 but from what I tried the 4.1 works with the A6 I'll know for sure Wednesday mines due here then. make sure that is also plugged in .
yours should be in a plastic case .....
other wise not having it in front of me or seeing just what it's doing is beyond me unless it stopped working .
thanks for pointing out that mistake i made .
Really weird or I am really f'ing confused.
So with the new SD card image I can login to avalon web config page, but the miner does not run. The USB converter does the normal thing of red to green. I can click the "restart cgiminer" from the intranet portal and the USB converter LEDs blink their start patter red to green and the miner fan will adjust briefly but the miner LED remains blinking green, never goes to blue.
So, put the original SD card in and restart as it was mining, just couldn't control the speed as the portal would not come up (original issue which started the quest for new image) and went to the address 192.168.1.100 mistakenly as the browser defaulted to it (the original was on .24 or something) and the Avalon6 portal comes up and it's not weird looking like it was before, so I try logging in and it comes up normally, I'm able to control speed etc.
So I'm hella confused. I thought the CD card image was the OS and it was corrupted somehow. Now it is not??
Should I take a backup assuming it's OK at the moment??
Thanks,
Thomas