[PASC] PascalCoin: Induplicatable NFT

[pilotbtc1]

Hey, who's to say the purse 1,4,2 I download or I can take the Poloniex, thanks

[1714839972]

1714839972

[1714839972]

1714839972

[NEETS]

Wow now in polo rate is 140K. I hope it rate will going up again... 

[mirny]

V3 have same error......... and I heard maybe from just one miner he managed to find block, which still mean nothing

well no.. it mean that is work

I found two blocks, two days back with V3 miner

[agente]

Don't use that 0.2 Pascalminer for AMD or use any of the CUDA miners.

I think the issue with the 0.2 miner is there is some bug and it keeps doing the same work over and over again with the same nonce. So your speed might be 2000 MH/s per rig but if it does the same work over and over again your effective hashrate might be 1000 MH/s.

It might be good if you only have 2 GPUs per rig but if you got like 6-7x RX 480s it becomes ineffective. Been noticing this behaviour because my crappy 270x OR 3 GPU mini rigs have been finding blocks but my 6 GPUs rigs with R9 290s and RX 480 haven't found a single block.

I don't think its bad luck or variance because when 0.2 Pascalminer was first released last week the difficulty was low and I had a similar issue back then.

would be stupid not to take ur advice

now im thinking of changing one rig to ver1 OpenCL miner... hmmmmmm
this would have been nice to know earlier 

@pascalcoin can you give us your feedback?

[barrysty1e]

Don't use that 0.2 Pascalminer for AMD or use any of the CUDA miners.

I think the issue with the 0.2 miner is there is some bug and it keeps doing the same work over and over again with the same nonce. So your speed might be 2000 MH/s per rig but if it does the same work over and over again your effective hashrate might be 1000 MH/s.

It might be good if you only have 2 GPUs per rig but if you got like 6-7x RX 480s it becomes ineffective. Been noticing this behaviour because my crappy 270x OR 3 GPU mini rigs have been finding blocks but my 6 GPUs rigs with R9 290s and RX 480 haven't found a single block.

I don't think its bad luck or variance because when 0.2 Pascalminer was first released last week the difficulty was low and I had a similar issue back then.

would be stupid not to take ur advice

now im thinking of changing one rig to ver1 OpenCL miner... hmmmmmm
this would have been nice to know earlier  

@pascalcoin can you give us your feedback?

if it was doing the same work, with the same nonce, this would be very easy to spot with the java proxy.
is the nonce identical for each share submitted?

[Amph]

V3 have same error......... and I heard maybe from just one miner he managed to find block, which still mean nothing

well no.. it mean that is work

I found two blocks, two days back with V3 miner

[img]https://i.imgur.com/3W0YArv.png[img]

[img]https://i.imgur.com/abRc9RL.png[img]

tnx for the screen, the v4 only enhanced the speed, so it should work too

[mirny]

V3 have same error......... and I heard maybe from just one miner he managed to find block, which still mean nothing

well no.. it mean that is work

I found two blocks, two days back with V3 miner

[img]https://i.imgur.com/3W0YArv.png[img]

[img]https://i.imgur.com/abRc9RL.png[img]

tnx for the screen, the v4 only enhanced the speed, so it should work too

meh, but it won't, I leave V3 running for another day

[adaseb]

Don't use that 0.2 Pascalminer for AMD or use any of the CUDA miners.

I think the issue with the 0.2 miner is there is some bug and it keeps doing the same work over and over again with the same nonce. So your speed might be 2000 MH/s per rig but if it does the same work over and over again your effective hashrate might be 1000 MH/s.

It might be good if you only have 2 GPUs per rig but if you got like 6-7x RX 480s it becomes ineffective. Been noticing this behaviour because my crappy 270x OR 3 GPU mini rigs have been finding blocks but my 6 GPUs rigs with R9 290s and RX 480 haven't found a single block.

I don't think its bad luck or variance because when 0.2 Pascalminer was first released last week the difficulty was low and I had a similar issue back then.

would be stupid not to take ur advice

now im thinking of changing one rig to ver1 OpenCL miner... hmmmmmm
this would have been nice to know earlier  

@pascalcoin can you give us your feedback?

if it was doing the same work, with the same nonce, this would be very easy to spot with the java proxy.
is the nonce identical for each share submitted?

The 0.2 miner doesn't use the proxy.

Too bad there is no testnet, would of been easy to investigate the issue.

[7enuke]

suprnova private pool-server ?

ip  37.187.146.34
port 4276 / 4277 / 4278 / 4279 work

[Salatik_cn]

I don't know if I hitted block, just take a look guys, somebody give me a confirmation.. Thanks
If this is correct that I hitted block, this single gpu of in my remote desktop is luckiest of all!

I've "found" this (56814) block too, man.

[mickey_miner]

Well this turned into a surprise.  Mined a bunch in the beginning.  I didn't even think of selling when it first hit an exchange.  Wasn't worth much of anything.  
Now I wish I would have kept mining it for a few more weeks while the difficulty was significantly lower than it is today. Could have easily gotten a few locks a day for a couple more weeks.  Oh well.  I'll take my five figure profit and keep the other half of what I mined for now.

Those people that bought at 300 sats.  I should have done the same.  

[szafa]

Now i must remember buy coin with new technology and wait 6 month to i will be reach.

[yhlsqj]

Well this turned into a surprise.  Mined a bunch in the beginning.  I didn't even think of selling when it first hit an exchange.  Wasn't worth much of anything.  
Now I wish I would have kept mining it for a few more weeks while the difficulty was significantly lower than it is today. Could have easily gotten a few locks a day for a couple more weeks.  Oh well.  I'll take my five figure profit and keep the other half of what I mined for now.

Those people that bought at 300 sats.  I should have done the same.  

Who bought at 300 sats are ridiculously rich now. Poloniex is a miracle exchange over those bitcoin exchanges, poloniex's volume is even larger than Chinese exchanges, top 3 Chinese exchanges have 10k BTC volume, while Pascal got more than 20k BTC volume. Many people make huge money but many lose money, it is trading.

[fredeq]

new calculator but i don't know is true, http://whattomine.com/coins/172-pasc-pascal?utf8=%E2%9C%93&hr=2650&p=1400&fee=0.0&cost=0.14&hcost=0.0&commit=Calculate

2 days 4hour 15 minute 5 gpu all at 520-550 r9 290 o block is very hard but this calculator is true is really rentable best profit now

I still havent tackled the proper target to difficulty formula.
Would love to have a chat with dev about it...

Probably will have to estimate difficulty from Nethash, but I dont like this, its not accurate.

[D8V1D]

20 hours @ 19,600 H/s (AMD) still haven't found a block 

Crytocompare says I should have found 360 Pasc a day, so 3.6 blocks.

https://www.cryptocompare.com/mining/calculator/pasc?HashingPower=19600&HashingUnit=MH%2Fs&PowerConsumption=4800&CostPerkWh=0.12

[adaseb]

20 hours @ 19,600 H/s (AMD) still haven't found a block 

Crytocompare says I should have found 360 Pasc a day, so 3.6 blocks.

https://www.cryptocompare.com/mining/calculator/pasc?HashingPower=19600&HashingUnit=MH%2Fs&PowerConsumption=4800&CostPerkWh=0.12

Don't use PascalMiner 0.2 !!!!!!

[john1010]

Can somebody post the download link of Pascal miner v4

Thanks a bunch!  

edited
I mean do you have the latest version of pascal miner for amd cards? Thanks a lot!

[7enuke]

suprnova private pool-server ?

ip  37.187.146.34
port 4276 / 4277 / 4278 / 4279 work

What about this URL?

https://pasc.suprnova.cc/

yes, this URL... ocminer work in progress ?

[adaseb]

suprnova private pool-server ?

ip  37.187.146.34
port 4276 / 4277 / 4278 / 4279 work

That's definately not a pool since the block target is exactly equal to the difficulty, if it was a pool it would be lower.

[7enuke]

Can somebody post the download link of Pascal miner v4

Thanks a bunch!  

releas from klausT

https://github.com/KlausT/PascalCoin-CUDA/releases