[WTS] Open Frame Rig

[Amph]

i'm building and selling these if someone is interested

price: 0.08 btc + shipping



you can screw both psu and ssd to the rig, MB is screwed with M3 nylon screw, 100% insulated, that white wireway is for insulating the bottom of the gpu when you place over it

[1714514776]

1714514776

[1714514776]

1714514776

[1714514776]

1714514776

[1714514776]

1714514776

[QuentinA]

Got one from this guy through ebay (didn't know he operated here) and it's really good quality stuff

Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480

[Amph]

Got one from this guy through ebay (didn't know he operated here) and it's really good quality stuff

Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480

you are the french guy? good, perhaps the risers usb cables touched the "white" bar? i can change that if this is a problem, i don't use usb risers so i did not know about this possible issue

[QuentinA]

Got one from this guy through ebay (didn't know he operated here) and it's really good quality stuff

Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480

you are the french guy? good, perhaps the risers usb cables touched the "white" bar? i can change that if this is a problem, i don't use usb risers so i did not know about this possible issue

That's me, here's what I'm talking about : https://drive.google.com/file/d/0B1pT04MB3X0aSUo5NkFvMlZwaDQ/view?usp=sharing

Don't have a picture of the 470 because it was a shitty series and burned out, it's in the shop now

[Amph]

Got one from this guy through ebay (didn't know he operated here) and it's really good quality stuff

Just be carefull with Nitro 470 you'll have to bend the riser usb cable, no problem with ref 480

you are the french guy? good, perhaps the risers usb cables touched the "white" bar? i can change that if this is a problem, i don't use usb risers so i did not know about this possible issue

That's me, here's what I'm talking about : https://drive.google.com/file/d/0B1pT04MB3X0aSUo5NkFvMlZwaDQ/view?usp=sharing

Don't have a picture of the 470 because it was a shitty series and burned out, it's in the shop now

yeah i knew about that possible issue, in fact i moved that bar 2 cm toward the right, but it seems that it was not enough, those risers are very long

mh i'll think about a new solution or just move even more that bar on the right(i didn't this because for small gpu it would be an issue to have that bar too far away, i don't want that the gpu angle toward the bottom)

can you tell me if 2cm would be enough so the risers will not bend that way?

[QuentinA]

Well IMO there are 2 options, either you move the bar 2_3cm to the back, or you put a les thick (>1cm) bar at this place, option 2 is better because then you won't have smaller cards hangign

I hope this was clear, I'll make a drawing if it's not

Cheers,
Q.

[Amph]

Well IMO there are 2 options, either you move the bar 2_3cm to the back, or you put a les thick (>1cm) bar at this place, option 2 is better because then you won't have smaller cards hangign

I hope this was clear, I'll make a drawing if it's not

Cheers,
Q.

yeah those were my two options at least, but the small bar can not be attached to the connectors, so you need to screw it, but not above the other side bars, or you will end up with the card not on the same plane, due to the thickness

[QuentinA]

Okay actually I'm a moron, I just have tu put the card a little up so that it's the USB and not the card resting on the frame, it's still all fine

PS : enjoy the bump mate !

[Amph]

anyway i fixed that issue, with the next design, better placement for the psu and a flat bar instead of square one, i only have this bad resolution image for now

[Gladimor]

I'd like to leave a big vouch for this man. Received my frame and assembled. The frame itself is aesthetically pleasing, and I seated my rig components with no issues. Will be buying more from him in the future.

[Amph]

tnx for the opinion, and the bump

pictures are also welcome for others to see how it looks assembled, i can't do it because ironically i don't have this frame, mine is different because it was my first design

[Amph]

price reduced to 0.12 due to btc rise

[QuentinA]

Here are some pictures :
(still don't know how to put them in the body)

https://drive.google.com/open?id=0B1pT04MB3X0adl9jalpSdXg5Rkk
https://drive.google.com/open?id=0B1pT04MB3X0acUtReUdWcVBsVnc

Cheers !

[thedreamer]

Can you make them stackable?

[Eyedol-X]

Can you make them stackable?

Been wondering this myself

[Amph]

Can you make them stackable?

yes but it need more materials, it will be like mine



but to be honest it's better if you buy a shelf like this

https://www.amazon.com/Gracious-Living-4-Shelf-Light-Shelf/dp/B0083ESFAM/ref=sr_1_5?ie=UTF8&qid=1477031788&sr=8-5&keywords=plastic+shelf

that can handle many of them, than stacking one on top of each other, it's more easy to move in this way

[buckrogers]

Option 3:

Make the bar that holds the back part of the gpu adjustable with a simple cut out on the inside the frame so you can slide it to the position you need and tighten a screw

thanks!

[ATCkit]

Where are you located? Just wondering about the shipping cost to Toronto, Canada - postal code M6S 3T8?

[Amph]

Where are you located? Just wondering about the shipping cost to Toronto, Canada - postal code M6S 3T8?

i'm just sending to a same location in canada, shipping is a bit high, but it depend on how many you order, maybe it can be around $35 only...just checked again, it's 47 euro

Option 3:

Make the bar that holds the back part of the gpu adjustable with a simple cut out on the inside the frame so you can slide it to the position you need and tighten a screw

thanks!

but then it would look ugly with the fissure in the alluminium bar, i think the last design do not have any problem anymore

[Lennieo]

interested. willing to buy!! whats the awesome total price inc post to aus. will buy alot more in the future, like to see how this will go out about. pm if you can