Wolf's XMR GPU Miner

[tony_crunk]

FYI -

When this event happens in wolf v0.4, the miner keeps mining but never finds shares.    So it just spins cycles for hours and makes you no coin.   Overnight I had 7 hours of 0 shares.  

[00:22:30] Thread 2, GPU ID 2, GPU Type: Ellesmere: 635.44H/s
[00:22:31] Thread 1, GPU ID 1, GPU Type: Ellesmere: 658.38H/s
[00:22:31] Share rejected (Unauthenticated): 13598/13654 (99.59%)
[00:22:31] Reconnected to pool.
[00:22:31] Share rejected (your IP is banned): 13598/13655 (99.58%)
[00:22:31] Total Hashrate: 3944.09H/s
[00:22:31] Thread 2, GPU ID 2, GPU Type: Ellesmere: 635.88H/s
[00:22:32] Thread 1, GPU ID 1, GPU Type: Ellesmere: 658.83H/s
[ ... after this, no more shares until reset .. ]

So you might want to add that string ("your IP is banned") into your monitoring programs to reset the miner.

what difficulties have you set?
banned ip is when the difficulty is too low

[Trimegistus]

My bad, I was doing the testing on a rig which had cards with the default VBIOS on them.

With the modified VBIOS (memory straps mod) I get around 720 H/s each or 3600 H/s on a 5x RX470 GPU rig with these settings.
      
   "threads": 2,
   "rawintensity": 512,
   "worksize": 4

I'm just wondering... wouldn't these settings be similar to these?

        "threads": 1,
   "rawintensity": 1024,
   "worksize": 8

[Za1n]

My bad, I was doing the testing on a rig which had cards with the default VBIOS on them.

With the modified VBIOS (memory straps mod) I get around 720 H/s each or 3600 H/s on a 5x RX470 GPU rig with these settings.
      
   "threads": 2,
   "rawintensity": 512,
   "worksize": 4

I'm just wondering... wouldn't these settings be similar to these?

        "threads": 1,
   "rawintensity": 1024,
   "worksize": 8

Not as far as the resulting hashrate. With the settings you list on the same rig I get 3200 H/s, or only 640 H/s per card.

I am still playing around with trying different settings, but it is looking like the 2, 512, 4 settings are the ones to beat so far, at least for me.

[tony_crunk]

My bad, I was doing the testing on a rig which had cards with the default VBIOS on them.

With the modified VBIOS (memory straps mod) I get around 720 H/s each or 3600 H/s on a 5x RX470 GPU rig with these settings.
      
   "threads": 2,
   "rawintensity": 512,
   "worksize": 4

I'm just wondering... wouldn't these settings be similar to these?

        "threads": 1,
   "rawintensity": 1024,
   "worksize": 8

with these parameters I get 1310 h/s about 655 h/s per card. I do not know why

[dallase]

FYI -

When this event happens in wolf v0.4, the miner keeps mining but never finds shares.    So it just spins cycles for hours and makes you no coin.   Overnight I had 7 hours of 0 shares.  

[00:22:30] Thread 2, GPU ID 2, GPU Type: Ellesmere: 635.44H/s
[00:22:31] Thread 1, GPU ID 1, GPU Type: Ellesmere: 658.38H/s
[00:22:31] Share rejected (Unauthenticated): 13598/13654 (99.59%)
[00:22:31] Reconnected to pool.
[00:22:31] Share rejected (your IP is banned): 13598/13655 (99.58%)
[00:22:31] Total Hashrate: 3944.09H/s
[00:22:31] Thread 2, GPU ID 2, GPU Type: Ellesmere: 635.88H/s
[00:22:32] Thread 1, GPU ID 1, GPU Type: Ellesmere: 658.83H/s
[ ... after this, no more shares until reset .. ]

So you might want to add that string ("your IP is banned") into your monitoring programs to reset the miner.

what difficulties have you set?
banned ip is when the difficulty is too low

I was using dwarfpool 8100.

>> Stratum-port: 8100 start diff: 10000 for high-end CPU and GPU-Rigs

After running into rejected shares and IP getting banned, I tried the fixed diff port 9100.

>> Stratum-port: 9100 fixed diff: 10000

Ran into same issue there.

Its weird because wolf v0.4 will run for hours without issue on both ports 8100 and 9100.  We are talking 10-20k+ accepted shares w/ 100% accept rate.   Then all of a sudden something goes crazy and rejected shares go up and IP gets banned.

Right now I'm over 20k w/ 100% accept.

[10:58:36] Share accepted: 20862/20862 (100.00%)
[10:58:36] Total Hashrate: 4067.31H/s

But it seems like its just a ticking time bomb.   I may just send my shares to crypto-pool for a couple days and see.

[tony_crunk]

which is the best pool?

[owlcatz]

which is the best pool?

AFAIK, there is no "best" pool - Here is a list:

http://chainradar.com/xmr/pools

[dallase]

which is the best pool?

Is there a pool that has a user interface like ethermine/ethpool/flypool ??  All the one's I've tried pale in comparison.

[tytanick]

Any idea about Banned IP on dwarfpool by using this miner ?

[ntrader]

Trying to start miner - it's shut down.
How to start this miner with command line? Does anyone has a working example?

[tony_crunk]

which amd driver you have tried?

[dallase]

Any idea about Banned IP on dwarfpool by using this miner ?

Between the lower pool side hash rate and getting banned (probably related), I've finally switched to sgminer 5.5.4-gm.   The only reason I had not switched earlier was because I couldnt get the damn thing to compile and the precompiled binary didnt have a cryptonight kernel.

I have 14 gpu running 675 h/s (9.45 khs), pointed at Dwarfpool right now.

Latest Pool side #'s (~15m)   10.04 khs,  9.57 khs   9.91 khs

[tony_crunk]

Any idea about Banned IP on dwarfpool by using this miner ?

Between the lower pool side hash rate and getting banned (probably related), I've finally switched to sgminer 5.5.4-gm.   The only reason I had not switched earlier was because I couldnt get the damn thing to compile and the precompiled binary didnt have a cryptonight kernel.

I have 14 gpu running 675 h/s (9.45 khs), pointed at Dwarfpool right now.

Latest Pool side #'s (~15m)   10.04 khs,  9.57 khs   9.91 khs

wich is the sgminer configuration?

[Marvell1]

Any idea about Banned IP on dwarfpool by using this miner ?

Between the lower pool side hash rate and getting banned (probably related), I've finally switched to sgminer 5.5.4-gm.   The only reason I had not switched earlier was because I couldnt get the damn thing to compile and the precompiled binary didnt have a cryptonight kernel.

I have 14 gpu running 675 h/s (9.45 khs), pointed at Dwarfpool right now.

Latest Pool side #'s (~15m)   10.04 khs,  9.57 khs   9.91 khs

wich is the sgminer configuration?

yeah please share , having issues with wolf and claymore I need to switch as well

[Lafu]

AppData\Local\Temp\jh.cl", line 151: error: function call is not
          allowed in a constant expression
    C64e(0xa7403b1f1c2747f3), C64e(0x5940f034b72d769a),
                             

Error limit reached.
100 errors detected in the compilation
Compilation terminated.
Frontend phase failed compilation.




What does that mean i cant get the miner running on R9 270x vapor x 2 gb  !
Driver are 16.11.5
Please can some on help to get this running !!!!!!

[mirny]

Any idea about Banned IP on dwarfpool by using this miner ?

Between the lower pool side hash rate and getting banned (probably related), I've finally switched to sgminer 5.5.4-gm.   The only reason I had not switched earlier was because I couldnt get the damn thing to compile and the precompiled binary didnt have a cryptonight kernel.

I have 14 gpu running 675 h/s (9.45 khs), pointed at Dwarfpool right now.

Latest Pool side #'s (~15m)   10.04 khs,  9.57 khs   9.91 khs

wich is the sgminer configuration?

yeah please share , having issues with wolf and claymore I need to switch as well

Try this, it's working for me.
 http://cryptozone.ml/monero.php

[thedue]

which is the best pool?

Is there a pool that has a user interface like ethermine/ethpool/flypool ??  All the one's I've tried pale in comparison.

see sig (afflink)
works great so far

[mirny]

which is the best pool?

Is there a pool that has a user interface like ethermine/ethpool/flypool ??  All the one's I've tried pale in comparison.

see sig (afflink)
works great so far

I was trying this pool, but when you using claymore, or wolf miner, you're getting penalized for invalid shares,
you can see unconfirmed balance is in negative.

[ocminer]

which is the best pool?

Is there a pool that has a user interface like ethermine/ethpool/flypool ??  All the one's I've tried pale in comparison.

You might want to give https://xmr.suprnova.cc a shot, I just reopened it.

[waddupboi]

Anyone has an idea on how to compile it on windows?