[ANN][ENT] Eternity - X11 - No Premine

[olcaytu2005]

I would advise you to relaunch the coin with a fresh chain as this looks fishy. It looks like you mined up to 1700 blocks with no difficulty before people could actually start mining. If you relaunch it will give you credits and prove you are honest.

[EternityGroup]

I would advise you to relaunch the coin with a fresh chain as this looks fishy. It looks like you mined up to 1700 blocks with no difficulty before people could actually start mining. If you relaunch it will give you credits and prove you are honest.

I had this idea, but I was stopped by the time that the restart may scare even more. And 1700 blocks the coin 22 is only 37 400 coins, the total is 60 000 000 ENT -  0.062%, it is not the premine

[LeoBull]

ccminer error: get_work failed...?

[EternityGroup]

ccminer error: get_work failed...?

I have encountered similar that mining is only a pool, but run it bothers me no block explorer. This further adds puzzles me how it started mining.
The source pool code is ready, I can try to run  without block explorer. I need about 30 minutes. Then I lay out the data for the connection.

[4rzun4]

ccminer error: get_work failed...?

I have encountered similar that mining is only a pool, but run it bothers me no block explorer. This further adds puzzles me how it started mining.
The source pool code is ready, I can try to run  without block explorer. I need about 30 minutes. Then I lay out the data for the connection.

Can you tell us, Where mining pool of Eternity?

[EternityGroup]

As I promised, but larger time.
P2Pool for Eternity:
Algorithm: X11
web: http://p2p.eternity-group.org/static/
URL: stratum + tcp: //144.76.33.134: 9208
Username: Your Payout Address
Password: Anything
I'm in a hurry, so the design of the standard.

[EternityGroup]

ccminer error: get_work failed...?

I have encountered similar that mining is only a pool, but run it bothers me no block explorer. This further adds puzzles me how it started mining.
The source pool code is ready, I can try to run  without block explorer. I need about 30 minutes. Then I lay out the data for the connection.

Can you tell us, Where mining pool of Eternity?

The p2pool source code posted for everyone to GitHub - https://github.com/eternity-group/p2pool-eternity

[LeoBull]

So two miners on the network... 1 is 12MHs the other is 2GHs. What's the point of throwing 2GHs at it when there are no other big miners? Just raising the diff for yourself there smartypants

[daveolake]

pool work good thanks

[LeoBull]

pool down... 502 Bad Gateway

[daveolake]

pool back..... what is needed to setup a node?

[won99]

Any bounty for translation sir?

[EternityGroup]

I apologize to the miners, I had to make 2 Restart pool to eliminate minor problems. Now we have placed a request for the addition of  Blockchain, after its implementation will be made to one more restart  pool, for entering the data in the source code. But this restart inform in advance.
Thanks to everyone who joined the mining Eternity!

[EternityGroup]

pool back..... what is needed to setup a node?

Sorry, you are interested in PoS mining?

[LeoBull]

I apologize to the miners, I had to make 2 Restart pool to eliminate minor problems. Now we have placed a request for the addition of  Blockchain, after its implementation will be made to one more restart  pool, for entering the data in the source code. But this restart inform in advance.
Thanks to everyone who joined the mining Eternity!

the coin has no blockchain?

[EternityGroup]

Any bounty for translation sir?

Sorry, I did not understand your question...

[daveolake]

pool back..... what is needed to setup a node?

Sorry, you are interested in PoS mining?

yes. on site it looks like a pi to run pos device, half of coins are going some where, do you run a node from wallet? or do you need a pi with software to run node? More info on nodes please.

[EternityGroup]

I apologize to the miners, I had to make 2 Restart pool to eliminate minor problems. Now we have placed a request for the addition of  Blockchain, after its implementation will be made to one more restart  pool, for entering the data in the source code. But this restart inform in advance.
Thanks to everyone who joined the mining Eternity!

the coin has no blockchain?

No, we have applied for, had waited for 48 hours and did not get any response, asked again 24 hours and no response again, now negotiating with another site.
As soon as the information on this issue, II will inform immediately

[EternityGroup]

pool back..... what is needed to setup a node?

Sorry, you are interested in PoS mining?

yes. on site it looks like a pi to run pos device, half of coins are going some where, do you run a node from wallet? or do you need a pi with software to run node? More info on nodes please.

On Rasbery Pi (BananaPro) set wallet (hot wallet) and be dedicated external IP address, forwarding port 4855 and open access to that port.
eternity.conf on Rasbery Pi (BananaPro)

Code:

eternitynode = 1
eternitynodeprivkey =
discover = 1
externalip = xxx.xxx.xxx.xxx: 4855
eternitynodeaddr = xxx.xxx.xxx.xxx: 4855

xxx.xxx.xxx.xxx - your external IP address

eternitynodeprivkey -> console debug wallet (cool wallet) on Windows:

Code:

eternitynode genkey

the resulting hash will be eternitynodeprivkey

Then everything in the cold wallet!!!

Code:

getaccountaddress 0

or any name to received address send 1000 ENT, exactly 1000! and wait 15 confirmations.

[EternityGroup]

Save and restart the hot wallet

Next, you need to fill

Code:

eternitynode.conf

Code:

alias xxx.xxx.xxx.xxx:4855 eternitynodeprivkey(hot wallet) tx(transactions 1,000 ENT) number

1 space everywhere
to know the number type in the Debug Console

Code:

eternitynode outputs

and we see our transaction and the number at the end
Save and restart a cold wallet
In the Debug Console

Code:

eternitynode start-many

тo start PoS mining
In response will be clear run or not
After 1-2 hours, check, command

Code:

eternitynode list-conf

 If ENABLED - all is well, if not, then you need to look for errors in the 99% do not have access from the Internet to a hot wallet.

Pictures Unfortunately I can not attach, the forum does not allow. On the site

Code:

http://eternity-group.org

all of the instructions will be posted soon.