[ANN][ENT] Eternity - X11 - No Premine

[dekm0101]

Do you know what are the masternode rewards right now also I have concerns whether the dev have has abandoned this project?

I believe it's roughly 9 coins per day.

Check the nodes section below.

http://ent.eternity-group.org/

With 10% going back to development you would think they are making some money now.  You are right though that there has been 0 activity since release.

[CryptoBatsy]

Do you know what are the masternode rewards right now also I have concerns whether the dev have has abandoned this project?

I believe it's roughly 9 coins per day.

Check the nodes section below.

http://ent.eternity-group.org/

With 10% going back to development you would think they are making some money now.  You are right though that there has been 0 activity since release.

Okay thanks I guess I will just run the MN anyways since it's cheap and who knows this project might pick up some pace in the future if the dev decides to give it some time or the project get's taken over by new devs. Also this is crypto and it might pump for no reason at all who knows 

[mixterz]

Hi, just picked up the 1k for the node. Is there a slack group?
Thanks

[Nahpets]

yes, it is:

Slack group Invitation

Join my Slack team! https://join.slack.com/t/eternitycoin/shared_invite/MjEzNTgxMjUwNzI1LTE1MDAyMDA3MzEtZTQ3NGQyN2RkZQ

[MrDreamerrr]

wow, coin is going up

[mixterz]

standard windows wallet setup for masternode please ?

also is there a masternode pro page to monitor?
 thanks

[0xBAADF00D]

standard windows wallet setup for masternode please ?

also is there a masternode pro page to monitor?
 thanks

here is masternode monitor page:
http://ent.eternity-group.org/

join the slack, there is a manual and you'll get help there

https://join.slack.com/t/eternitycoin/shared_invite/MjEzNTgxMjUwNzI1LTE1MDAyMDA3MzEtZTQ3NGQyN2RkZQ

[jimhsu]

any guide/script for masternode setup on vps maybe mutliple nodes with ipv6?

btw link on op to website shows 404 page not found error:
http://ent.eternity-group.org/en/

not very trustworthy for new people  

Not exactly the most active dev team out there. Well, not active since may or so XD

I tried to make a IPv6 multiple installation with the help of mersmsxn (sorry, I know I always write horribly wrong your nick   ) but there is something inherently wrong with the wallet which avoid us of getting it.

Salute

I had success with the following conf settings (relevant parts bolded):

rpcuser=eternityrpc
rpcpassword=x
listen = 1
rpcport = (something)
daemon = 1
server = 1
gen = 0
discover = 1
eternitynode = 1
externalip = [ipv6]:4855
eternitynodeaddr = [ipv6]:4855
bind = 127.0.0.x
bind = [ipv6]
eternitynodeprivkey = xxx

bind should be the ipv6 address AND a loopback (127.0.0.1-255, different for each instance). This means you can have no more than 255 instances running on a single server, though I doubt that will be a problem. Also each node should have a different rpcport just in case. Each instance should also run on a separate user account.

The local conf file should include [ipv6]:4855 as the bind address.

If that doesn't work, check to make sure that the ipv6 addresses are actually bound (ifconfig). Many hosts offer ipv6 but activate it only by manual request.

[0xBAADF00D]

any guide/script for masternode setup on vps maybe mutliple nodes with ipv6?

btw link on op to website shows 404 page not found error:
http://ent.eternity-group.org/en/

not very trustworthy for new people 

its the wrong page, try: http://ent.eternity-group.org/
(just remove "/en" at the end)
 

[Smokeyw]

is there any other way to check if the MN is working ?
because after 1 day no payment at all
if i check the network traffic i see  50 mb received and send
so you should say its working

[0xBAADF00D]

is there any other way to check if the MN is working ?
because after 1 day no payment at all
if i check the network traffic i see  50 mb received and send
so you should say its working

on your VPS execute ./eternity-cli eternitynode status
and you should see output as:
"status" : "Eternitynode successfully started"

if you see that, its working and maybe it takes a bit longer now for first reward to come

you can join the slack and get assistance there, here is the invite:
https://join.slack.com/t/eternitycoin/shared_invite/MjEzNTgxMjUwNzI1LTE1MDAyMDA3MzEtZTQ3NGQyN2RkZQ

[sreechone]

How many Eternity coins required to create master node ?

[cryptogaga]

ENT should be 1usd by now coin supply low and tech is good

[cryptogaga]

How many Eternity coins required to create master node ?

1000 ENT for a Masternode

[Smokeyw]

is there any other way to check if the MN is working ?
because after 1 day no payment at all
if i check the network traffic i see  50 mb received and send
so you should say its working

on your VPS execute ./eternity-cli eternitynode status
and you should see output as:
"status" : "Eternitynode successfully started"

if you see that, its working and maybe it takes a bit longer now for first reward to come

you can join the slack and get assistance there, here is the invite:
https://join.slack.com/t/eternitycoin/shared_invite/MjEzNTgxMjUwNzI1LTE1MDAyMDA3MzEtZTQ3NGQyN2RkZQ

im on windows
"overall" : "Successfully started 1 eternitynodes, failed to start 0, total 1",
    "detail" : {
        "status" : {
            "alias" : "Smoke",
            "result" : "successful"

[FYIcryptoz]

Guys lets get serious, where is the dev? This should be our first concern before asking all those questions about masternodes. Does ANYONE have more information on this topic?

[sreechone]

I think its similar to Chain Coin.. What makes it worth when compared to Chain coin ?

[chumind]

Are you guys continuing with this coin or are you guys focusing on your new coin attraction coin

[Angel Di]

How many Eternity coins required to create master node ?

1000 ENT for a Masternode

I do not think that's a lot.

[berron]

How many Eternity coins required to create master node ?

1000 ENT for a Masternode

I do not think that's a lot.

I have some of those things. 1000 ENT per node, is correct. You can check it in the github repo if you want.