Open Source ZEC (ZCash) GPU Miner AMD & NVidia (up to 45 sol/s on RX480)

[Raja_MBZ]

is this still in testnet? why people are talking about profit? there is no profit yet before release

I'm wondering that same thing. Why so much rush when it's still in test? I'm ready with my RX 480's to mine it, but not in that hurry.

[1714855361]

1714855361

[1714855361]

1714855361

[1714855361]

1714855361

[corsaro]

excellent work

[IOTUSA]

I am lazy so I get to pay. Can someone build me the AMD miner, as a flawless Windows 10 x64 installer for 290/390 cards. 0.05 BTC for a download link that passes virus scan.

Edit: Apparently I'm lazy, and can't read. I guess binaries were posted.

[adaseb]

He posted the windows binaries

[IOTUSA]

He posted the windows binaries

Where? in the gz/tar file?

[MinermanNC]

He posted the windows binaries

Where? in the gz/tar file?

Did you extract or unzip the gz file?

[MinermanNC]

Late last night I fired the windows version on dual 7970's was getting 8.7 sold per card. Very impressed with this miner. 17.4 sols on that rig.

[Gh0st7niper]

Could someone please help me?

I downloaded the binary and edited the config. I have 4x R9 280x.

I installed the radeon-crimson-15.12-with-dotnet45-win7-64bit driver and i also tested it already with the latest one.

This is my config:

Code:

server = "coinsforall.io";

port = "6668";


# Your ZCASH payout address

address = "zthTb2ToG5kuAc11Ni6NxoYjoxQdEr2XvST7XEdLvmHG9k7kotEcwYCaAn1SH4zRdPoXn9kNeFm8CQok9SNtNgn8d9WcdTK";


# You can give this machine a custom name

# Computer name is used as default

# name = "worker_name";


# Platform:

#  "amd": AMD GCN cards

#  "nvidia": NVidia Maxwell cards

platform = "amd";


# GPU crash handling (properly untested feature):

# 0 - do nothing

# 1 - close miner application

# 2 - reboot system (need superuser rights)

onCrash = "0";


# - The following settings have one entry per GPU

# - If you have more than 4 just add more entries or leave it as is to use defaults

# - All entries must be separated by commas and set between double quotes


# 0 = don't use device

# 1 = use device

devices =        ["1", "1", "1", "1"];


# work sizes

worksizes = ["256", "256", "256", "256"];


# threads

threads = ["8192", "8192", "8192", "8192"];


# -1 means don't change

corefreq =       ["1000", "1000", "1000", "1000"];

memfreq =        ["1500", "1500", "1500", "1500"];

powertune =      ["-1", "-1", "-1", "-1"];

fanspeed =       ["80", "80", "80", "80"];

After starting the miner the first time it makes this and hang up:

https://s16.postimg.org/yi01mk1lx/Bildschirmfoto_2016_10_25_um_09_06_19.png

This is what the error tells that could be helpfull to detect the problem :/ ?

  C:\Users\ethereum\AppData\Local\Temp\WER933A.tmp.WERInternalMetadata.xml
  C:\Users\ethereum\AppData\Local\Temp\WERC439.tmp.appcompat.txt
  C:\Users\ethereum\AppData\Local\Temp\WERC44A.tmp.mdmp

after doing the second start it tells this:

https://s16.postimg.org/51kfk4v8l/Bildschirmfoto_2016_10_25_um_09_07_38.png

Same happens with standard settings without changing config. I also installe OpenCL 2.0 to get sure all is installed.

The same happens after the try to delete the equiw bin. It generated a new one and crashes on second start the same again like on top.

Does anyone have a solution for me? I am on Windows 7

Try this zcashclient, you have two folders inside.Copy equiw200k9.bin from(kernel_R92xx_linux_14.4 ) folder,and replace the existing and try. Works on 15.12 driver...
https://mega.nz/#!Z4BwTSRD!VQdiSjmTFW4YGXUUJYJhcPHHUcF64z_CA_yVWprKNtA
2x280x
http://image.prntscr.com/image/7dd7776f864a49b9ba7ca4712f521527.jpeg

[IOTUSA]

He posted the windows binaries

Where? in the gz/tar file?

Did you extract or unzip the gz file?

Well, Gz is a linux native compression format I believe. That's why I wondered where the files were.

[Ursul0]

OpenCL error: -11 at /build/xpmclient/src/opencl.cpp:153

can help me?

Did you find a way to fix it?
possibly I had the same one, but it was flashing too fast to read...
I was getting this on Win10 on ASRock FM2+ FM2A88X+
at first it was crashing, but after cleaning user\temp dir it actually produced a build, but it never worked...

On Win10 (both anniversary and old builds)  ASrock B150 Pro4/D3 and Asrock H96 Anniversary it just works.

same setup as ETH my UV RX4s produce 16-18 sols

[giagge]

btw sol on 1070 is very bad around 2-3, with windows 10, drivers, 372.90

on the other hand consumption is abysmally low, i'm at 330w total with 6 gpu, basically around 45w each one...clearly not optimized

Not work on my windows 10 with nvidia 1070 , my config.txt is mistaken .

Pls you write your config.txt ?

Thanks .

[snakey]

Toomim are still smashing it compared to ever miner out....

They are getting 40H/s per card....

There is no point if we can only get 8 - 20 per card using this software.

Dont get me wrong, very grateful for the effort but you looking at double the speed on one card.

[adaseb]

Toomim are still smashing it compared to ever miner out....

They are getting 40H/s per card....

There is no point if we can only get 8 - 20 per card using this software.

Dont get me wrong, very grateful for the effort but you looking at double the speed on one card.

Within time and if the coin is a big hit some devs will come up with a miner that's faster than 40H/s. Right now nobody knows how profitable this coin will be and don't want to waste their time when it launches on exchanges and pays 25% of current ETH profitability.

[tiCeR]

Could someone please help me?

I downloaded the binary and edited the config. I have 4x R9 280x.

I installed the radeon-crimson-15.12-with-dotnet45-win7-64bit driver and i also tested it already with the latest one.

This is my config:

Code:

server = "coinsforall.io";

port = "6668";


# Your ZCASH payout address

address = "zthTb2ToG5kuAc11Ni6NxoYjoxQdEr2XvST7XEdLvmHG9k7kotEcwYCaAn1SH4zRdPoXn9kNeFm8CQok9SNtNgn8d9WcdTK";


# You can give this machine a custom name

# Computer name is used as default

# name = "worker_name";


# Platform:

#  "amd": AMD GCN cards

#  "nvidia": NVidia Maxwell cards

platform = "amd";


# GPU crash handling (properly untested feature):

# 0 - do nothing

# 1 - close miner application

# 2 - reboot system (need superuser rights)

onCrash = "0";


# - The following settings have one entry per GPU

# - If you have more than 4 just add more entries or leave it as is to use defaults

# - All entries must be separated by commas and set between double quotes


# 0 = don't use device

# 1 = use device

devices =        ["1", "1", "1", "1"];


# work sizes

worksizes = ["256", "256", "256", "256"];


# threads

threads = ["8192", "8192", "8192", "8192"];


# -1 means don't change

corefreq =       ["1000", "1000", "1000", "1000"];

memfreq =        ["1500", "1500", "1500", "1500"];

powertune =      ["-1", "-1", "-1", "-1"];

fanspeed =       ["80", "80", "80", "80"];

thanks for the try to help but no success. someone else an idea? :/

After starting the miner the first time it makes this and hang up:



This is what the error tells that could be helpfull to detect the problem :/ ?

  C:\Users\ethereum\AppData\Local\Temp\WER933A.tmp.WERInternalMetadata.xml
  C:\Users\ethereum\AppData\Local\Temp\WERC439.tmp.appcompat.txt
  C:\Users\ethereum\AppData\Local\Temp\WERC44A.tmp.mdmp

after doing the second start it tells this:



Same happens with standard settings without changing config. I also installe OpenCL 2.0 to get sure all is installed.

The same happens after the try to delete the equiw bin. It generated a new one and crashes on second start the same again like on top.

Does anyone have a solution for me? I am on Windows 7

Try this zcashclient, you have two folders inside.Copy equiw200k9.bin from(kernel_R92xx_linux_14.4 ) folder,and replace the existing and try. Works on 15.12 driver...
https://mega.nz/#!Z4BwTSRD!VQdiSjmTFW4YGXUUJYJhcPHHUcF64z_CA_yVWprKNtA
2x280x

seems not to work :/ another idea to fix this ?

[malekbaba]

I want to give it a try to mine in pool. I have downloaded the latest release. My current AMD catalyst version is 15.12
Whenever I click on zcashgpuclient.exe a black window appears and disappears.

What to do to get it working, please tell me step wise

[giagge]

Not work on my windows 10 with nvidia 1070 , my config.txt is mistaken .

Pls you write your config.txt ?

Thanks .


ANYONE FOR HELP???

.

[IOTUSA]

Toomim are still smashing it compared to ever miner out....

They are getting 40H/s per card....

There is no point if we can only get 8 - 20 per card using this software.

Dont get me wrong, very grateful for the effort but you looking at double the speed on one card.

20 significantly beats 0.

[anorganix]

btw sol on 1070 is very bad around 2-3, with windows 10, drivers, 372.90

Is seems that the current release has some issues with multiple GPUs.
Try testing with only 1 card specified in the config and you should see around 21-22 sols/s.

PS: I haven't tried it yet, but you can also try to run multiple instances and use 1 device per instance (something like below).

Code:

# 1st instance config
devices =        ["1", "0", etc];

# 2nd instance config
devices =        ["0", "1", etc];

[IOTUSA]

Would still like someone to roll a Windows x64 build nice and neat. If you provide a download link for a 'click and install' miner that supports multiple AMD GPU without errors I have a BTC0.05 bounty for you.

[superresistant]

 
Could we have binaries for Ubuntu 14 ?
Zcash client works on Ubunty 14.