Open Source ZEC (ZCash) GPU Miner AMD & NVidia (up to 45 sol/s on RX480)

[IOTUSA]

FYI I will be performing benchmarks using Supermicro Atom based low-power server later this week. Hoping for 10 Sol/s under 100W

[Cryptozillah]

Any wallets for Windows available yet ?

[ivcelmik]

750 ti  makes ~10 s/s 

Correct but with multi gpu spil the hashrate if u try with 5 gpus u get 2s/s for each

[iom]

Yes, miner have problem to work correct with more than 1 Nvidia cards.

[millefiori]

if u try with 5 gpus u get 2s/s for each

I've read above that only 4 gpus are limited for that miner (work properly). is that right?  Or even 2 will be bad allready?

[klondike_bar]

My i7 laptop can do 8-9 sol/s without any tweaking. That's far less power draw than most 2xx/3xx gpus and similar hashrate.

How *isnt* this going to be the next botnet-coin? Gpu mining it has meager results compare to a laptop cpu, and likely the network will flood with thousands of botnetted computers

[MinermanNC]

Cool, and Thx. I have no issue with it, just didn't expect win binaries to reside inside a Gz.tar file

Yes a bit surprised myself, unusual to see this way. But it works  

[Gaglam]

if u try with 5 gpus u get 2s/s for each

I've read above that only 4 gpus are limited for that miner (work properly). is that right?

No. I got 5 GPUs (280x):

[GPU 0] T=-1C A=-1% sols=8.661
[GPU 1] T=-1C A=-1% sols=9.085
[GPU 2] T=-1C A=-1% sols=9.525
[GPU 3] T=-1C A=-1% sols=9.068
[GPU 4] T=-1C A=-1% sols=9.763

[Nioctib77]

shappire r9 380 nitro 6sols

I have 7.4 same card.

[IOTUSA]

There are a TON of optimizations left to be made for GPU's. Toomins claim 40 Sol/s on a single GPU, and that's after just a week or two of 'lucky' optimization of memory shuffling.

[iom]

if u try with 5 gpus u get 2s/s for each

I've read above that only 4 gpus are limited for that miner (work properly). is that right?  Or even 2 will be bad allready?

Problem is the same with 2 Nvidia cards too.

[CjMapope]

Any wallets for Windows available yet ?

what?

this is a GPU miner thread...

plus zcash doesn't even get released till the 28th, AND has already stated there will NOT be windows wallets on launch...

please do some research before coming into a thread with useless questions...  or for god sake alteast READ the OP...

[giagge]

My nvidia gtx 1070 dont work on windows 10  , use this config.txt :

server = "coinsforall.io";
port = "6668";

# Your ZCASH payout address
address = "zthTb2ToG5kuAc11Ni6NxoYjoxQdEr2XvST7XEdLvmHG9k7kotEcwYCaAn1SH4zRdPoXn9kNeFm8CQo k9SNtNgn8d9WcdTK";

# You can give this machine a custom name
# Computer name is used as default
# name = "worker_name";

# Platform:
#  "amd": AMD GCN cards
#  "nvidia": NVidia Maxwell cards
platform = "nvidia";

# GPU crash handling (properly untested feature):
# 0 - do nothing
# 1 - close miner application
# 2 - reboot system (need superuser rights)
onCrash = "0";

# - The following settings have one entry per GPU
# - If you have more than 4 just add more entries or leave it as is to use defaults
# - All entries must be separated by commas and set between double quotes

# 0 = don't use device
# 1 = use device
devices =        ["1", "1", "1", "1", "1"];

# work sizes
worksizes = ["256", "256", "256", "256", "256"];

# threads
threads = ["8192", "8192", "8192", "8192", "8192"];

# -1 means don't change
corefreq =       ["-1", "-1", "-1", "-1", "-1"];
memfreq =        ["-1", "-1", "-1", "-1", "-1"];
powertune =      ["-1", "-1", "-1", "-1", "-1"];
fanspeed =       ["-1", "-1", "-1", "-1", "-1"];

pause

.

[valkot]

My nvidia gtx 1070 dont work on windows 10  , use this config.txt :

server = "coinsforall.io";
port = "6668";

# Your ZCASH payout address
address = "zthTb2ToG5kuAc11Ni6NxoYjoxQdEr2XvST7XEdLvmHG9k7kotEcwYCaAn1SH4zRdPoXn9kNeFm8CQo k9SNtNgn8d9WcdTK";

# You can give this machine a custom name
# Computer name is used as default
# name = "worker_name";

# Platform:
#  "amd": AMD GCN cards
#  "nvidia": NVidia Maxwell cards
platform = "amd";

# GPU crash handling (properly untested feature):
# 0 - do nothing
# 1 - close miner application
# 2 - reboot system (need superuser rights)
onCrash = "0";

# - The following settings have one entry per GPU
# - If you have more than 4 just add more entries or leave it as is to use defaults
# - All entries must be separated by commas and set between double quotes

# 0 = don't use device
# 1 = use device
devices =        ["1", "1", "1", "1", "1"];

# work sizes
worksizes = ["256", "256", "256", "256", "256"];

# threads
threads = ["8192", "8192", "8192", "8192", "8192"];

# -1 means don't change
corefreq =       ["-1", "-1", "-1", "-1", "-1"];
memfreq =        ["-1", "-1", "-1", "-1", "-1"];
powertune =      ["-1", "-1", "-1", "-1", "-1"];
fanspeed =       ["-1", "-1", "-1", "-1", "-1"];

pause

.

platform = "amd"?

[Gaglam]

Well, maybe because a nvidia gtx 1070 is not an AMD Card?
Just maybe... 

[anorganix]

Remove the pause and the . (dot) from the config.
Fanspeed = XXX YYY ZZZ should be your last line.

And change platform from amd to nvidia.

[Cryptozillah]

Any wallets for Windows available yet ?

what?

this is a GPU miner thread...

plus zcash doesn't even get released till the 28th, AND has already stated there will NOT be windows wallets on launch...

please do some research before coming into a thread with useless questions...  or for god sake alteast READ the OP...

Buy a better fucking attitude.. thnx

[ivcelmik]

if u try with 5 gpus u get 2s/s for each

I've read above that only 4 gpus are limited for that miner (work properly). is that right?  Or even 2 will be bad allready?

Problem is the same with 2 Nvidia cards too.

Yes with 2 card spilt the hasrate in 2 with 3 split in 10/3 and so on

[padrino]

Any word on general stratum support?

[_javi_]

Do you need just the nvidia driver or something else? I get opencl error while trying with a 1070