fmz89
Legendary
Offline
Activity: 1766
Merit: 1002
|
|
October 28, 2016, 03:37:16 PM |
|
Message about R9 280X and version 0.2.2: Yes, that works with 1 instance of silentarmy About 20 sols on stock clocks. what windows version doing well on silentarmy?
|
|
|
|
eXtremal (OP)
|
|
October 28, 2016, 03:38:30 PM |
|
Message about R9 280X and version 0.2.2: Yes, that works with 1 instance of silentarmy About 20 sols on stock clocks. cant start silentarmy with my r9 280x's: <info> found 5 devices Using device 0 as GPU 0 Using device 1 as GPU 1 Using device 2 as GPU 2 Using device 3 as GPU 3 Using device 4 as GPU 4 OpenCL error: -11 at /build/xpmclient/src/opencl.cpp:163 Driver issues 100% Remove binaries and try another
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3150
Merit: 1003
|
|
October 28, 2016, 03:40:28 PM |
|
My god... why did they make it sooooooooooo different to mine a coin? ? ?
|
|
|
|
ratatella
Newbie
Offline
Activity: 21
Merit: 0
|
|
October 28, 2016, 03:41:19 PM |
|
Does the fanspeed setting work on Linux? Doesn't seem to do anything on my 470's, and the fan is too slow. The new AMDGPU-PRO Driver for Linux doesn't seem to have any console app to adjust it.
same here. it's over 70oC. sometimes, one of my gpu (6xRX470) crash. Same same, Running silent army under linux with rx 480 because win10 crashes with silent army but gives double sols compared to non-silent army.. It would be really nice if we could, in Linux, control freq, mem, fan through the config.txt as there is no AMD tweak tool for Linux as there is Wattman for Windows.. But.. changing this config.txt makes no changes.. not even turns fans faster..? GPU's getting quite hot and need to turn fans up.. but how?
|
|
|
|
nevermind41
|
|
October 28, 2016, 03:42:43 PM |
|
D:\zcashclient-0.2.2>zcashgpuclient madPrimeMiner-v1.1 ClientName = 'PC01' ClientID = 1682249513 InstanceID = 183674 Address = 'zthTb2ToG5kuAc11Ni6NxoYjoxQdEr2XvST7XEdLvmHG9k7kotEc 9kNeFm8CQok9SNtNgn8d9WcdTK' found platform[0] name = 'Intel(R) OpenCL' found platform[1] name = 'NVIDIA CUDA' <error> platform AMD Accelerated Parallel Processing not exists
Config is really hard to understand. I have 1070 rig. What must I do to work it properly?
|
|
|
|
jpozz
Newbie
Offline
Activity: 1
Merit: 0
|
|
October 28, 2016, 03:43:13 PM |
|
Will the pool automatically switch over to the mainnet? Right now we're only mining on the testnet right? It's running fine on Windows 7 so far, though only once instance per GPU.
|
|
|
|
Gaglam
|
|
October 28, 2016, 03:44:01 PM |
|
That did the trick Thanks a lot Silentarmy: [GPU 0] T=-1C A=-1% sols=25.254 [GPU 1] T=-1C A=-1% sols=23.967 [GPU 2] T=-1C A=-1% sols=25.051 [GPU 3] T=-1C A=-1% sols=22.417 [GPU 4] T=-1C A=-1% sols=24.900 Normal version: [GPU 0] T=-1C A=-1% sols=15.305 [GPU 1] T=-1C A=-1% sols=14.203 [GPU 2] T=-1C A=-1% sols=15.729 [GPU 3] T=-1C A=-1% sols=14.305 [GPU 4] T=-1C A=-1% sols=14.267
|
|
|
|
TheKoolaider
Member
Offline
Activity: 84
Merit: 10
|
|
October 28, 2016, 03:44:50 PM |
|
D:\zcashclient-0.2.2>zcashgpuclient madPrimeMiner-v1.1 ClientName = 'PC01' ClientID = 1682249513 InstanceID = 183674 Address = 'zthTb2ToG5kuAc11Ni6NxoYjoxQdEr2XvST7XEdLvmHG9k7kotEc 9kNeFm8CQok9SNtNgn8d9WcdTK' found platform[0] name = 'Intel(R) OpenCL' found platform[1] name = 'NVIDIA CUDA' <error> platform AMD Accelerated Parallel Processing not exists
Config is really hard to understand. I have 1070 rig. What must I do to work it properly?
anywhere it says amd in quotes, change it to nvidia. I was able to get that to detect the cards, but on my 750m I'm testing on, it would crash.
|
|
|
|
thaiphamce
Newbie
Offline
Activity: 26
Merit: 0
|
|
October 28, 2016, 03:46:00 PM |
|
Does the fanspeed setting work on Linux? Doesn't seem to do anything on my 470's, and the fan is too slow. The new AMDGPU-PRO Driver for Linux doesn't seem to have any console app to adjust it.
same here. it's over 70oC. sometimes, one of my gpu (6xRX470) crash. Same same, Running silent army under linux with rx 480 because win10 crashes with silent army but gives double sols compared to non-silent army.. It would be really nice if we could, in Linux, control freq, mem, fan through the config.txt as there is no AMD tweak tool for Linux as there is Wattman for Windows.. But.. changing this config.txt makes no changes.. not even turns fans faster..? GPU's getting quite hot and need to turn fans up.. but how? I find an app here, but I can't install it. Maybe not work for ubuntu 16.04 https://sourceforge.net/projects/amdovdrvctrl/
|
|
|
|
orionpaxx12
Member
Offline
Activity: 101
Merit: 10
|
|
October 28, 2016, 03:47:08 PM |
|
orionpaxx12 Error -4 is CL_MEM_OBJECT_ALLOCATION_FAILURE, you have not enough memory, or can't access entire memory on card (may be GPU_MAX_ALLOC_PERCENT и GPU_USE_SYNC_OBJECTS variables can help you).
ok thanks the 1070 is 8gb where exactly would i add the variables GPU_MAX_ALLOC_PERCENT и GPU_USE_SYNC_OBJECTS
|
|
|
|
TheKoolaider
Member
Offline
Activity: 84
Merit: 10
|
|
October 28, 2016, 03:48:26 PM |
|
orionpaxx12 Error -4 is CL_MEM_OBJECT_ALLOCATION_FAILURE, you have not enough memory, or can't access entire memory on card (may be GPU_MAX_ALLOC_PERCENT и GPU_USE_SYNC_OBJECTS variables can help you).
ok thanks the 1070 is 8gb where exactly would i add the variables GPU_MAX_ALLOC_PERCENT и GPU_USE_SYNC_OBJECTS try pasting this before your command line for your bat file GPU_MAX_ALLOC_PERCENT 100 GPU_USE_SYNC_OBJECTS 100
|
|
|
|
nevermind41
|
|
October 28, 2016, 03:48:55 PM |
|
D:\zcashclient-0.2.2>zcashgpuclient madPrimeMiner-v1.1 ClientName = 'PC01' ClientID = 1682249513 InstanceID = 183674 Address = 'zthTb2ToG5kuAc11Ni6NxoYjoxQdEr2XvST7XEdLvmHG9k7kotEc 9kNeFm8CQok9SNtNgn8d9WcdTK' found platform[0] name = 'Intel(R) OpenCL' found platform[1] name = 'NVIDIA CUDA' <error> platform AMD Accelerated Parallel Processing not exists
Config is really hard to understand. I have 1070 rig. What must I do to work it properly?
anywhere it says amd in quotes, change it to nvidia. I was able to get that to detect the cards, but on my 750m I'm testing on, it would crash. Thanks for your reply. I opened config with wordpad and I found the problem as you said. I always use notepad because of this I couldn't understand anything.
|
|
|
|
ratatella
Newbie
Offline
Activity: 21
Merit: 0
|
|
October 28, 2016, 03:52:05 PM |
|
Does the fanspeed setting work on Linux? Doesn't seem to do anything on my 470's, and the fan is too slow. The new AMDGPU-PRO Driver for Linux doesn't seem to have any console app to adjust it.
same here. it's over 70oC. sometimes, one of my gpu (6xRX470) crash. Same same, Running silent army under linux with rx 480 because win10 crashes with silent army but gives double sols compared to non-silent army.. It would be really nice if we could, in Linux, control freq, mem, fan through the config.txt as there is no AMD tweak tool for Linux as there is Wattman for Windows.. But.. changing this config.txt makes no changes.. not even turns fans faster..? GPU's getting quite hot and need to turn fans up.. but how? I find an app here, but I can't install it. Maybe not work for ubuntu 16.04 https://sourceforge.net/projects/amdovdrvctrl/already try that one as well but no luck..
|
|
|
|
eXtremal (OP)
|
|
October 28, 2016, 03:54:57 PM |
|
Begin to switching to main net, pool will be unavailable during few minutes (up to 30)
|
|
|
|
orionpaxx12
Member
Offline
Activity: 101
Merit: 10
|
|
October 28, 2016, 03:55:44 PM |
|
orionpaxx12 Error -4 is CL_MEM_OBJECT_ALLOCATION_FAILURE, you have not enough memory, or can't access entire memory on card (may be GPU_MAX_ALLOC_PERCENT и GPU_USE_SYNC_OBJECTS variables can help you).
ok thanks the 1070 is 8gb where exactly would i add the variables GPU_MAX_ALLOC_PERCENT и GPU_USE_SYNC_OBJECTS try pasting this before your command line for your bat file GPU_MAX_ALLOC_PERCENT 100 GPU_USE_SYNC_OBJECTS 100 yeah normally but there is no bat file just the config, and as far as i remember those variables are for amd, i am getting the error with the 1070, can you even create a bat file for this 2.2 ver.?
|
|
|
|
muleman8
Member
Offline
Activity: 121
Merit: 10
|
|
October 28, 2016, 04:01:42 PM |
|
Begin to switching to main net, pool will be unavailable during few minutes (up to 30) do we need to create a new main net zcash address?
|
|
|
|
MinermanNC
Legendary
Offline
Activity: 2198
Merit: 1000
|
|
October 28, 2016, 04:01:50 PM |
|
Begin to switching to main net, pool will be unavailable during few minutes (up to 30) New addresses are required correct? RC4?
|
*BTC: 1DiR25SPo84sThzTATr27EZEQZLt6hv6tG
|
|
|
Tmdz
|
|
October 28, 2016, 04:05:10 PM |
|
Yes you need new address
|
|
|
|
orionpaxx12
Member
Offline
Activity: 101
Merit: 10
|
|
October 28, 2016, 04:07:40 PM |
|
|
|
|
|
muleman8
Member
Offline
Activity: 121
Merit: 10
|
|
October 28, 2016, 04:11:47 PM |
|
Yes you need new address
thank you - may I ask how I would go about doing this? do i need to edit the zcash.conf file in linux wallet and then restart wallet and generate new wallet address?
|
|
|
|
|