Discussion on Legacy SilkCoin wallet to help late swappers to New Silk (SLK)

[Crypt0Keeper]

It's not synced yet but gotta go to bed
did few transfers

What version of the wallet are you using?  I'm using 1.1.1.1.

[1714705610]

1714705610

[1714705610]

1714705610

[1714705610]

1714705610

[1714705610]

1714705610

[1714705610]

1714705610

[ttoroie]

What version of the wallet are you using?  I'm using 1.1.1.1.

The one above is   v1.1.0.21
I like that one cause I donated for the graphics long time ago and it kinda feels personal
I uploaded it to the Silkcoin Folder, on drive

right now I'm using v1.1.1.2-g32a928eBETA for the last few days

tip: whenever the wallet blocks switch to the other one
used to work when the chain was active, now I don't see the difference

[ttoroie]

Crypt0Keeper
I knew that addy was yours
it's in the white list 
the chain is not active since 4th of November

[Crypt0Keeper]

Crypt0Keeper
I knew that addy was yours
it's in the white list 
the chain is not active since 4th of November

What is the white list?  Non-MintPal-Scam people?

I'll have to try that trick with switching between the two wallets.  Any idea why the chain isn't active?  I currently only have two connections.

[ttoroie]

me too
only 2 coonections

What is the white list?  Non-MintPal-Scam people?

It's my whitelist
with people I thrust

[ttoroie]

I need to get to the bottom of MintPal-Scam addresses first
and then send the team a plead to try activate staking on a wallet with mature coins
see what happens then

[Crypt0Keeper]

I need to get to the bottom of MintPal-Scam addresses first
and then send the team a plead to try activate staking on a wallet with mature coins
see what happens then

So what happened that it stopped?  I thought the network was supported by the staking wallets?  Is that not the case?

At this point I am officially worried that I won't be able to get my investment out.

[MCDev]

me too
only 2 coonections

What is the white list?  Non-MintPal-Scam people?

It's my whitelist
with people I thrust

I just remoted into my vm and

masterop@SC-001:~/SilkCoin$ ./silkcoind getconnectioncount
13
masterop@SC-001:~/SilkCoin$ ./silkcoind getblockcount
1758735

[Crypt0Keeper]

me too
only 2 coonections

What is the white list?  Non-MintPal-Scam people?

It's my whitelist
with people I thrust

I just remoted into my vm and

masterop@SC-001:~/SilkCoin$ ./silkcoind getconnectioncount
13
masterop@SC-001:~/SilkCoin$ ./silkcoind getblockcount
1758735

Yeah man, I can't figure out how you have so many connections...

Here's the info for one of my wallets.  I'll get the other one later tonight.

Code:

{
"version" : "v1.1.1.1-g32a928eBETA",
"protocolversion" : 60017,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 320029.86711466,
"blocks" : 1758735,
"timeoffset" : 0,
"moneysupply" : 44040833.90213142,
"connections" : 3,
"proxy" : "",
"ip" : "66.152.153.119",
"difficulty" : {
"proof-of-work" : 983.12145799,
"proof-of-stake" : 0.00157756
},
"testnet" : false,
"keypoololdest" : 1451970223,
"keypoolsize" : 100,
"paytxfee" : 0.00000000,
"mininput" : 0.00000000,
"unlocked_until" : 0,
"errors" : ""
}

and

Code:

{
"enabled" : false,
"staking" : false,
"errors" : "",
"currentblocksize" : 0,
"currentblocktx" : 0,
"pooledtx" : 1,
"difficulty" : 0.00157756,
"search-interval" : 0,
"weight" : 0,
"netstakeweight" : 484,
"expectedtime" : -1
}

[Pondi]

I still am unable to sync

[ttoroie]

I've 5 connections after I opened the other version of the wallet
71.65.219.38
71.184.130.147
45.76.0.136  MCDev
24.69.82.136 Pondi
125.238.166.220

But most important

getstakinginfo should give you this result if you want to stake

{
"enabled" : true,
"staking" : false,
"errors" : "",
.....
}

If it's false, like in your case Crypt0Keeper,
you need to edit your silkcoin.conf file and edit first lines or delete them
staking=0
stakegen=0
reservebalance=100000000

The conf file uploaded contained those lines to prevent the wallet from staking because there were wallets blocked on staking
and people couldn't move their coins out to weaver

Now we're trying to stake to make new blocks
Sorry about that, my bad

[MCDev]

I've 5 connections after I opened the other version of the wallet
71.65.219.38
71.184.130.147
45.76.0.136  MCDev
24.69.82.136 Pondi
125.238.166.220

But most important

getstakinginfo should give you this result if you want to stake

{
"enabled" : true,
"staking" : false,
"errors" : "",
.....
}

If it's false, like in your case Crypt0Keeper,
you need to edit your silkcoin.conf file and edit first lines or delete them
staking=0
stakegen=0
reservebalance=100000000

The conf file uploaded contained those lines to prevent the wallet from staking because there were wallets blocked on staking
and people couldn't move their coins out to weaver

Now we're trying to stake to make new blocks
Sorry about that, my bad

I currently show I have 15 connection.  Sorry I can't clean the list to be only IPs (I'm on a bus commuting home from the day job) but here's my getpeerinfo results...

Code:

 ./silkcoind getpeerinfo
[
    {
        "addr" : "71.65.219.38:55328",
        "services" : "00000001",
        "lastsend" : 1478556516,
        "lastrecv" : 1478556516,
        "conntime" : 1478543910,
        "version" : 60014,
        "subver" : "/Satoshi:1.0.9/",
        "inbound" : true,
        "startingheight" : 1758735,
        "banscore" : 0
    },
    {
        "addr" : "209.122.15.66:13638",
        "services" : "00000001",
        "lastsend" : 1478556803,
        "lastrecv" : 1478556803,
        "conntime" : 1478543910,
        "version" : 60017,
        "subver" : "/Satoshi:1.1.1.1/",
        "inbound" : true,
        "startingheight" : 1758735,
        "banscore" : 0
    },
    {
        "addr" : "71.184.130.147:16666",
        "services" : "00000001",
        "lastsend" : 1478556599,
        "lastrecv" : 1478556599,
        "conntime" : 1478543936,
        "version" : 60017,
        "subver" : "/Satoshi:1.1.1.2/",
        "inbound" : false,
        "startingheight" : 1758735,
        "banscore" : 0
    },
    {
        "addr" : "45.63.16.17:50518",
        "services" : "00000001",
        "lastsend" : 1478557290,
        "lastrecv" : 1478557290,
        "conntime" : 1478543990,
        "version" : 60017,
        "subver" : "/Satoshi:1.1.1.1/",
        "inbound" : true,
        "startingheight" : 1758735,
        "banscore" : 0
    },
    {
        "addr" : "107.191.48.40:53257",
        "services" : "00000001",
        "lastsend" : 1478556807,
        "lastrecv" : 1478556807,
        "conntime" : 1478544004,
        "version" : 60017,
        "subver" : "/Satoshi:1.1.1.1/",
        "inbound" : true,
        "startingheight" : 1758735,
        "banscore" : 0
    },
    {
        "addr" : "97.93.2.112:33374",
        "services" : "00000001",
        "lastsend" : 1478556334,
        "lastrecv" : 1478556334,
        "conntime" : 1478544066,
        "version" : 60017,
        "subver" : "/Satoshi:1.1.1.1/",
        "inbound" : true,
        "startingheight" : 1758735,
        "banscore" : 0
    },
    {
        "addr" : "73.238.205.108:2827",
        "services" : "00000001",
        "lastsend" : 1478556769,
        "lastrecv" : 1478556769,
        "conntime" : 1478544164,
        "version" : 60017,
        "subver" : "/Satoshi:1.1.1.1/",
        "inbound" : true,
        "startingheight" : 1758735,
        "banscore" : 0
    },
    {
        "addr" : "96.127.136.18:40746",
        "services" : "00000001",
        "lastsend" : 1478556788,
        "lastrecv" : 1478556788,
        "conntime" : 1478544184,
        "version" : 60014,
        "subver" : "/Satoshi:1.0.9.2/",
        "inbound" : true,
        "startingheight" : 1758735,
        "banscore" : 0
    },
    {
        "addr" : "73.130.81.250:65233",
        "services" : "00000001",
        "lastsend" : 1478557098,
        "lastrecv" : 1478557099,
        "conntime" : 1478544489,
        "version" : 60017,
        "subver" : "/Satoshi:1.1.1.1/",
        "inbound" : true,
        "startingheight" : 1758735,
        "banscore" : 0
    },
    {
        "addr" : "24.69.82.136:51389",
        "services" : "00000001",
        "lastsend" : 1478556368,
        "lastrecv" : 1478556368,
        "conntime" : 1478545560,
        "version" : 60017,
        "subver" : "/Satoshi:1.1.1.2/",
        "inbound" : true,
        "startingheight" : 1758735,
        "banscore" : 0
    },
    {
        "addr" : "125.238.166.220:16666",
        "services" : "00000001",
        "lastsend" : 1478556372,
        "lastrecv" : 1478556372,
        "conntime" : 1478549165,
        "version" : 60017,
        "subver" : "/Satoshi:1.1.1.2/",
        "inbound" : false,
        "startingheight" : 1758735,
        "banscore" : 0
    },
    {
        "addr" : "37.228.240.208:9367",
        "services" : "00000001",
        "lastsend" : 1478557756,
        "lastrecv" : 1478557756,
        "conntime" : 1478552353,
        "version" : 60017,
        "subver" : "/Satoshi:1.1.1.2/",
        "inbound" : true,
        "startingheight" : 1758735,
        "banscore" : 0
    },
    {
        "addr" : "78.70.227.24:24214",
        "services" : "00000001",
        "lastsend" : 1478557719,
        "lastrecv" : 1478557719,
        "conntime" : 1478554118,
        "version" : 60014,
        "subver" : "/Satoshi:1.0.9.2/",
        "inbound" : true,
        "startingheight" : 1131526,
        "banscore" : 0
    },
    {
        "addr" : "86.84.180.118:56621",
        "services" : "00000001",
        "lastsend" : 1478557370,
        "lastrecv" : 1478556432,
        "conntime" : 1478556431,
        "version" : 60017,
        "subver" : "/Satoshi:1.1.1.2/",
        "inbound" : true,
        "startingheight" : 1758735,
        "banscore" : 0
    },
    {
        "addr" : "104.157.46.151:56376",
        "services" : "00000001",
        "lastsend" : 1478557371,
        "lastrecv" : 1478557368,
        "conntime" : 1478557366,
        "version" : 60017,
        "subver" : "/Satoshi:1.1.1.2/",
        "inbound" : true,
        "startingheight" : 1758735,
        "banscore" : 0
    }
]

[MCDev]

I forgot to mention, aside from maintenance ports I need, the only port I allow in is 16666
I'm going to try setting the daemon to stake but it means shutting it down briefly 

[Crypt0Keeper]

I've 5 connections after I opened the other version of the wallet
71.65.219.38
71.184.130.147
45.76.0.136  MCDev
24.69.82.136 Pondi
125.238.166.220

But most important

getstakinginfo should give you this result if you want to stake

{
"enabled" : true,
"staking" : false,
"errors" : "",
.....
}

If it's false, like in your case Crypt0Keeper,
you need to edit your silkcoin.conf file and edit first lines or delete them
staking=0
stakegen=0
reservebalance=100000000

The conf file uploaded contained those lines to prevent the wallet from staking because there were wallets blocked on staking
and people couldn't move their coins out to weaver

Now we're trying to stake to make new blocks
Sorry about that, my bad

Those lines aren't actually in there.  It says I'm not staying because I have no mature coins, even though 320k are held in staking...

[ttoroie]

Those lines aren't actually in there.  It says I'm not staying because I have no mature coins, even though 320k are held in staking...

Did you try to put them in the conf
staking=0
stakegen=0
reservebalance=100000000

restart with -rescan

exit

delete conf file
restart with rescan

[MCDev]

Got my daemon set for staking but it's at 100% CPU, 98.9% is silkcoind ... go figure
That VM is only a single core because when testing the DNS seeders, Silk maxed out multicore vms before they got it fixed
Single core VMs hover about 0.7 to 3.0% after sync

I might try upsizing this one to 8 or 16 cores for a few hours... need to see what is available as this vm is hosted outside

[MCDev]

Got my daemon set for staking but it's at 100% CPU, 98.9% is silkcoind ... go figure
That VM is only a single core because when testing the DNS seeders, Silk maxed out multicore vms before they got it fixed
Single core VMs hover about 0.7 to 3.0% after sync

I might try upsizing this one to 8 or 16 cores for a few hours... need to see what is available as this vm is hosted outside

My luck, they are out of resources at that location.  I need to bring the node down for a bit to do a snapshot so I can create another node.
I'm planning on moving the wallet to the new vm, starting it up and then starting the original with an empty wallet.  I'll let the new vm run until Friday evening
I'll let you know when it's back up

[Pondi]

I have 17 connections but cannot sync, I guess I have to wait for a new block to sync

[MCDev]

I have 17 connections but cannot sync, I guess I have to wait for a new block to sync

What block are you on.  The last check I made had 1758735 and matched the explorer.  If that is the block you are at and the explorer still shows the same, you are synced, it's just that the wallet is looking at how old the last block is.  I'm limited to what I can do right now until the new VM is online ... shouldn't be long

[MCDev]

Ok, original vm is back online with a new empty wallet -- 14 connections

{
    "version" : "v1.1.0.21-g32a928e",
    "protocolversion" : 60016,
    "walletversion" : 60000,
    "balance" : 0.00000000,
    "newmint" : 0.00000000,
    "stake" : 0.00000000,
    "blocks" : 1758735,
    "timeoffset" : 0,
    "moneysupply" : 44040833.90213142,
    "connections" : 14,
    "proxy" : "",
    "ip" : "45.76.0.136",
    "difficulty" : {
        "proof-of-work" : 983.12145799,
        "proof-of-stake" : 0.00157756
    },
    "testnet" : false,
    "keypoololdest" : 1478570557,
    "keypoolsize" : 101,
    "paytxfee" : 0.00010000,
    "mininput" : 0.00000000,
    "errors" : ""
}

The new one is 45.32.222.209... I had to rescan because it was using 100% of all 4 vCPUs
I'll let you know when it's up