Bitcoin Forum
May 06, 2024, 02:45:14 PM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: [1]
  Print  
Author Topic: New Mining Farm - 60x RX480 XFX 8GB GTR cards  (Read 4040 times)
Ziljtv (OP)
Newbie
*
Offline Offline

Activity: 26
Merit: 0


View Profile WWW
November 07, 2016, 01:01:28 PM
 #1

Hey guys,

started a new mining farm and wanted to share my journey so far, will be releasing new videos every few days or weekly on new things, for the seasoned miners this won't really help but for the newbies it will help a lot.

Starting with 10 rigs for Phase 1, adding an additional 5 if amps for home use permits, built a dedicated rack for it etc..

Phase 2 will be housed at an office space with phase 3 power and running another 30-40 rigs in the next couple of months.

These are my videos so far; Next videos will be things like how to setup mining for Ethereum, how to setup mining for Zcash, how to Bios mod cards etc..

Ethereum and Altcoin Mining Farm - Part 1 Introduction - https://www.youtube.com/watch?v=V2HGHzGwHOA

Ethereum Mining Farm Frame - Part 1 Extension  - https://www.youtube.com/watch?v=s7RjEoOQSRU

Ethereum Mining Rig & Zcash Mining Rig - Part 2 How to Build  - https://www.youtube.com/watch?v=8ICXvxQb6H0

Ethereum Mining Farm Live - Part 3 Running - https://www.youtube.com/watch?v=YDUzo95ZkqM
1715006714
Hero Member
*
Offline Offline

Posts: 1715006714

View Profile Personal Message (Offline)

Ignore
1715006714
Reply with quote  #2

1715006714
Report to moderator
1715006714
Hero Member
*
Offline Offline

Posts: 1715006714

View Profile Personal Message (Offline)

Ignore
1715006714
Reply with quote  #2

1715006714
Report to moderator
1715006714
Hero Member
*
Offline Offline

Posts: 1715006714

View Profile Personal Message (Offline)

Ignore
1715006714
Reply with quote  #2

1715006714
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
Ziljtv (OP)
Newbie
*
Offline Offline

Activity: 26
Merit: 0


View Profile WWW
November 07, 2016, 02:17:58 PM
 #2

Better add a photo! https://i.imgur.com/gPdSKNL.jpg
Eyedol-X
Hero Member
*****
Offline Offline

Activity: 952
Merit: 508



View Profile
November 07, 2016, 02:45:30 PM
 #3

Nice setup, wish I had the time, the power, and the space to do something like that.
navydude
Sr. Member
****
Offline Offline

Activity: 283
Merit: 250


View Profile
November 07, 2016, 03:21:32 PM
 #4

You can half your amperage if you use 240v to the power supply. I run all my rigs except 1 on 240v. I have  dedicated 4 double pole 20 amp breakers. I have them split to run two rigs each. Could easily add a third rig and be safe with less than 80% load on those breakers. I run 380x so my power usage is higher than the 480. Just dont overload your home because most only have 200 amp service in the US. not sure about other countries.

bittawm
Legendary
*
Offline Offline

Activity: 1894
Merit: 1087



View Profile
November 07, 2016, 04:54:09 PM
 #5

canm you let me know what build you went with

@bittawm is my real telegram
@bittawm is my real twitter
beware of impersonators
Amph
Legendary
*
Offline Offline

Activity: 3206
Merit: 1069



View Profile
November 07, 2016, 06:01:22 PM
 #6

i would have used the rm1000i instead of the ax1200i, the latter is too expensive for just 1000w, you can safely run 480 on a 1000w, hell i'm running 6x1070 on one of these...

not many know this but the 1000w can actually draw up to 1050-1100w
Za1n
Legendary
*
Offline Offline

Activity: 1078
Merit: 1011



View Profile
November 07, 2016, 06:05:39 PM
 #7

Better add a photo!




I hope you have some big fans pointed toward that thing... The proximity of all those cards is going to generate massive amounts of heat in a very confined space. I would have kept a bit more separation between the two shelves, but as long as you have good air movement  at all times you should be ok.
Ziljtv (OP)
Newbie
*
Offline Offline

Activity: 26
Merit: 0


View Profile WWW
November 08, 2016, 07:12:29 AM
 #8

Cheers for the comments guys Smiley

Eyedol-X - Thanks mate!!

Navydude, no choice here, all 240v - here in Australia we only get 80AMP to the house, so hence only 10 rigs, each are drawing around 3.5-4 amp on Ethereum, about 2/3's that on Zcash.  I'll be setting up phase 2 at a business premisis with about 3-4x this equipment!

Bittawm - don't understand sorry mate? do you mean components? if you are looking it's all in my youtube videos here - https://www.youtube.com/user/ZiljTV

Amph - wanted the platinum's for efficiency and as little wastage as possible, power here in Australia is stupidly expensive it'll definitely pay for itself and to be safe, when I was testing RX480's, some couldn't handle such low mv for core/memory and had to be tuned higher, 1 rig needed over 1100 watts to dual mine 180+mh/s and Sia.  Won't be dual mining though, most likely just Eth and Zcash 50/50 from next few days onwards Smiley

Za1n - got a couple fans blowing the air around, it dropped temps by 10-15 degrees on the cards, even though it's still warm in the room air con can't keep up, it still helped a lot Smiley the cards are running around 60-70 degrees with fans not maxed out yet.
Amph
Legendary
*
Offline Offline

Activity: 3206
Merit: 1069



View Profile
November 08, 2016, 07:25:04 AM
 #9

Cheers for the comments guys Smiley

Eyedol-X - Thanks mate!!

Navydude, no choice here, all 240v - here in Australia we only get 80AMP to the house, so hence only 10 rigs, each are drawing around 3.5-4 amp on Ethereum, about 2/3's that on Zcash.  I'll be setting up phase 2 at a business premisis with about 3-4x this equipment!

Bittawm - don't understand sorry mate? do you mean components? if you are looking it's all in my youtube videos here - https://www.youtube.com/user/ZiljTV

Amph - wanted the platinum's for efficiency and as little wastage as possible, power here in Australia is stupidly expensive it'll definitely pay for itself and to be safe, when I was testing RX480's, some couldn't handle such low mv for core/memory and had to be tuned higher, 1 rig needed over 1100 watts to dual mine 180+mh/s and Sia.  Won't be dual mining though, most likely just Eth and Zcash 50/50 from next few days onwards Smiley

Za1n - got a couple fans blowing the air around, it dropped temps by 10-15 degrees on the cards, even though it's still warm in the room air con can't keep up, it still helped a lot Smiley the cards are running around 60-70 degrees with fans not maxed out yet.

yeah but the efficiency difference is very small like 2-3% at best, against a +$1k more expensive setup(10 x ax1200 vs 10 x rm1000), you will not cover it in years...

and if you really don't dual mine, you have another reason to avoid the 1200, because zec and etheruem alone, consume 600-800w at best for a sixx card rig
Mzie
Full Member
***
Offline Offline

Activity: 140
Merit: 100



View Profile
November 08, 2016, 08:50:49 AM
 #10

Congratulations, and how is your heat management? do you have enough fans or AC?
dagarair
Sr. Member
****
Offline Offline

Activity: 847
Merit: 383



View Profile WWW
November 08, 2016, 01:47:06 PM
 #11

Congratulations, and how is your heat management? do you have enough fans or AC?

Nice setup, I current have 30 rigs (180 cards) running in a similar setup.  I am sure you have noticed a heat issue already.  Bit of advice buy this:
http://www.ebay.com/itm/252421456916?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

And do this with it:
https://www.amazon.com/QuietCool-QC-CL-2250-Whole-Classic/dp/B00K0Q67ME/ref=sr_1_18?ie=UTF8&qid=1478612712&sr=8-18-spons&keywords=attic+vent&psc=1

I have 2 of those pulling and 2 more pushing "makeup air" and my farm sits at 55-60 degrees in texas =)




4MW Data Center - I BUILT Tongue  - Full story below:
https://bitcointalk.org/index.php?topic=4789787.msg43227027#msg43227027
Ziljtv (OP)
Newbie
*
Offline Offline

Activity: 26
Merit: 0


View Profile WWW
November 09, 2016, 05:13:17 AM
 #12

Amph - I leave myself open to being able to do anything and not being tied down to certain aspects, the original intentions were to dual mine, but with library/Siacoin dropping the way it has been, it's almost not worth it at all, so not dual mining right now.  This is also why I've gone with 8GB cards instead of 4GB cards, just future proofing.

Mzie - Right now, Aircon and 2x smaller fans circulating on the cards, it's helped a lot and dropped temps by 10-15 degrees across the cards even though the room is still pretty hot.

Dagarair - Cheers will take a look Smiley I'm guessing Texas ambient temps are quite high??  40 degrees here is not uncommon at all, which is 104+ in Fahrenheit terms.  For my home setup just looking to put a couple of exhaust fans in the roof, 250-300mm fans, they only draw about 15-20 watts.  For the larger setup 30-40 rigs coming I'll definitely be using large fans just to push air instead of air con.  I don't think the air con will keep up at all with a large setup.
DebitMe
Legendary
*
Offline Offline

Activity: 2786
Merit: 1011

Get Paid Crypto To Walk or Drive


View Profile
November 09, 2016, 05:46:57 PM
 #13

Very nice setup, I am looking into doing something similar, although probably on a smaller scale.  Is there a parts list that you can recommend?  I think the biggest issue for me right now is that it has been so long since I have been mining, I don't know the current ins and outs of mining hardware.  A guide on where and what to buy would be very helpful Smiley

Get paid crypto to walk or drive. Play CoinHuntWorld! Earn Hundreds Monthly!
https://coinhunt.gsc.im/IZIijYr64Q
Redrose
Hero Member
*****
Offline Offline

Activity: 756
Merit: 502


View Profile
November 09, 2016, 06:35:07 PM
 #14

Very nice setup. I wish I'll soon reach that point Wink ! But why are you placing a GPU on the motherboard ? You're loosing one slot that way.
Ziljtv (OP)
Newbie
*
Offline Offline

Activity: 26
Merit: 0


View Profile WWW
November 15, 2016, 09:05:28 AM
 #15

DebitMe - I'll try updating my lists to include where to buy parts.

Redrose - I did have a split ribbon cable which sits under the cards in the bottom row, unfortunately I ran out of these, so will be moving the top row cards onto the rack itself and just using more risers Smiley for now I just have an 11th rig setup over in the corner running the other cards.

BTW guys with current 5.0 version of claymore Zcash miner, RX480 is showing up to 120H/s, averaging 100H/s from the pools side.

Next videos will be how to bios flash a card/how to change settings in wattman/how to setup Ethereum miner for ETH or ETC, How to setup EXP mining (Ethash same as ETH/ETC), how to setup Zcash miner etc..

don't forget to subscribe if you want to follow along my path, I am currently taking expressions of interest for Phase 2 for my next setup which will be 30-40 rigs from my investors, so this will be up in the next couple of months as well!! - https://www.youtube.com/user/ZiljTV
PanneKopp
Sr. Member
****
Offline Offline

Activity: 391
Merit: 250


aka ...


View Profile
November 15, 2016, 09:33:42 PM
 #16

Better add a photo!




I hope you have some big fans pointed toward that thing... The proximity of all those cards is going to generate massive amounts of heat in a very confined space. I would have kept a bit more separation between the two shelves, but as long as you have good air movement  at all times you should be ok.

... really cool (I expect it rather hot) thing - my respect !

Yours PanneKopp

... please make an educated guess !
flyingdutchmen
Full Member
***
Offline Offline

Activity: 210
Merit: 100


Digital Crypto Wealth Management Platform


View Profile
November 15, 2016, 11:52:27 PM
 #17

Very nice mining setup, and it is perfect time to mine now with the ZEC jump in.

Ziljtv (OP)
Newbie
*
Offline Offline

Activity: 26
Merit: 0


View Profile WWW
November 16, 2016, 11:46:41 AM
 #18

YouTube video for how to download and setup Claymore Zcash miner 6.0

PS Sorry about the low volume, Mic broke and was using a gaming headset sitting on the desk.

https://www.youtube.com/watch?v=lUjhSGmE_t8
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!