Armory DB massages, what do they mean?Armory stops DB

[segeln]

Hi,
I have two sreenshots  which  I want to show you.But how to insert both ?  Because I do not understand theyr notifications
Thanks

[goatpig]

Use imgur

[segeln]

http://imgur.com/SaLKV5i
this message I  got during ArmorysDB,it flickert und did not go on. What personal site i hve to close?I had only the real time virus guard on (Avira Pro)
What else sites could affect the DB?


http://imgur.com/Bo6CqUA

This message with the "poller error in read from socket thread",what`s that?

I use the new Armory 0.95.1

[goatpig]

First link is dead, second one is benign, ignore it.

[segeln]

http://imgur.com/a/tQLlj



Hi goatpig,
are there any interferences with ArmoryQt,bitcoind and Armory DB and securitysoftware like Windows Defender or Avira Pro with their real-time scanning?(Firewall is allowing the apps)

Because sometimes I miss some blockfiles as you can see here:
http://imgur.com/WJCoeHZ

Iam currently make the most extreme factory reset and the blocks are following in a row without any
gaps.

[goatpig]

http://imgur.com/a/tQLlj

Please post armorylog.txt and dbLog.txt. Is your harddrive running out of free space?

Hi goatpig,
are there any interferences with ArmoryQt,bitcoind and Armory DB and securitysoftware like Windows Defender or Avira Pro with their real-time scanning?(Firewall is allowing the apps)

Because sometimes I miss some blockfiles as you can see here:
http://imgur.com/WJCoeHZ

A few years ago someone pushed some data in a signature that was flagged by some anti virus software. This resulted in some block data files getting quarantined. The issue has since then be reported as a false positive and you should not experience it anymore. You can verify yourself if your block files are sequential.

As for the block building report, that output is not meant to be exhaustive. It will only report when the first thread (among many) parses a block file, hence the gaps in the logs.

[segeln]

My Laptop has still 222GB space
Windows10 Pro
Be so kind to explain how to get the logfiles you wanted created and published

Thanks
segeln

Armory settings:

NotifyIgnore                         |
User_Mode                            | Advanced
First_Load                           | False
DNAA_UnlockTimeout                   | False
UnlockTimeout                        | 10
AdvFeature_UseCt                     | 0
Load_Count                           | 1
First_Load_Date                      | 1480784149
LastDirectory                        | C:\Users\Thomas\AppData\Roaming\Armory\
Agreed_to_EULA                       | False
LastVersionLoad                      | v0.95.1



Armorylog:

 2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1137 - C++ block utilities loaded successfully
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1247 -
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1248 -
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1249 -
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1250 - ************************************************************
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1251 - Invoked: C:\Program Files (x86)\Armory\ArmoryQt.exe
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1252 - ************************************************************
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1253 - Loading Armory Engine:
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1254 -    Armory Version        : 0.95.1
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1255 -    Armory Build:         : 374672b751
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1256 -    PyBtcWallet  Version  : 1.35
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1257 - Detected Operating system: Windows
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1258 -    OS Variant            : 8-6.2.9200--Multiprocessor Free
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1259 -    User home-directory   : C:\Users\Thomas\AppData\Roaming
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1260 -    Satoshi BTC directory : C:\Users\Thomas\AppData\Roaming\Bitcoin\
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1261 -    Armory home dir       : C:\Users\Thomas\AppData\Roaming\Armory\
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1262 - Detected System Specs    :
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1263 -    Total Available RAM   : 5.89 GB
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1264 -    CPU ID string         : Intel64 Family 6 Model 78 Stepping 3, GenuineIntel
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1265 -    Number of CPU cores   : 4 cores
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1266 -    System is 64-bit      : True
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1267 -    Preferred Encoding    : cp1252
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1268 -    Machine Arch          : amd64
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1269 -    Available HDD (ARM)   : 72 GB
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1270 -    Available HDD (BTC)   : 0 GB
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1271 -
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1272 - Network Name: Main Network
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1273 - Satoshi Port: 8333
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1274 - Do wlt check: True
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1275 - Named options/arguments to armoryengine.py:
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1277 -     thread_count    : -1
2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1277 -     rescan          : False




Ho to get the dbLog.txt ?  

P.S. my blocks are sequential now

[goatpig]

Code:

2016-12-03 17:55 (INFO) -- ArmoryUtils.pyc:1270 -    Available HDD (BTC)   : 0 GB

That's no good

Ho to get the dbLog.txt ?   

Your log files are:

C:\Users\Thomas\AppData\Roaming\Armory\armorylog.txt
C:\Users\Thomas\AppData\Roaming\Armory\dbLog.txt

Post these both here. Use pastebin if they're too big.

[segeln]

Use pastebin if they're too big.

Howdo I use pastebin.
It is may first time

[achow101]

Howdo I use pastebin.
It is may first time

Open your log files. Go to http://pastebin.com/ and copy and paste the contents of each log file into a new paste. If it is too big, get as much of the log file as you can from the bottom. Then post the link to the paste here.

[segeln]

Log file opened at 1480787110: C:\Users\Thomas\AppData\Roaming/Armory/dbLog.txt
-INFO  - 1480787110: (..\main.cpp:23) Running on 4 threads
-INFO  - 1480787110: (..\main.cpp:24) Ram usage level: 4

[segeln]

Howdo I use pastebin.
It is may first time

Open your log files. Go to http://pastebin.com/ and copy and paste the contents of each log file into a new paste. If it is too big, get as much of the log file as you can from the bottom. Then post the link to the paste here.

Thanks for your help.Iamm very ,very unfamiliar with pastebin,
Where do I find the link to the paste?

[segeln]

http://pastebin.com/4Sa5UdAj

[achow101]

http://pastebin.com/4Sa5UdAj

Please post all of the log file.

[segeln]

http://pastebin.com/4Sa5UdAj

Please post all of the log file.

well, I cannot find how to make the the URL button for the link at pastebin.
The first link was just luck

[achow101]

http://pastebin.com/4Sa5UdAj

Please post all of the log file.

well, I cannot find how to make the the URL button for the link at pastebin.
The first link was just luck

This is not that hard...

Copy and paste your log files into the big box on the front page. Then scroll down and click the button that says "Create new paste". It will load a page with your paste. Click on the URL in your browser and copy and paste that into a post here.

[segeln]

http://pastebin.com/4Sa5UdAj

Please post all of the log file.

well, I cannot find how to make the the URL button for the link at pastebin.
The first link was just luck

This is not that hard...

Copy and paste your log files into the big box on the front page. Then scroll down and click the button that says "Create new paste". It will load a page with your paste. Click on the URL in your browser and copy and paste that into a post here.

First,thank you very ,very much,because after about 3 days downloading  I am despaired
Here is the very long file: http://pastebin.com/ux9k9Je5
The actual Armory DB.exe is:  http://pastebin.com/ZQGjZZkF



Now I see,the blocks are from #509 up to #556 sequential, but then and partial before with gaps

[goatpig]

Ignore the sequential part, it is not a bug, just the code not going out of its way to report every file it scans. The DB looks fine. Run ArmoryQt.exe, the post the whole armorylog.txt.

[segeln]

Hi goatpig,
I have to apologize for the links,but the armorylog got 88.556KB,so I could not pastebin all together.

But as I now realise(checking the links) they are all more than simular,they are factually equal.
But I hope you can get the Information about the armorylog you are looking for.

http://pastebin.com/QwJnpKR8

http://pastebin.com/xm1EgRsh

http://pastebin.com/bg3bLWvE

http://pastebin.com/8RCj9ZGs

http://pastebin.com/Q4UqLFsh

http://pastebin.com/GJ8w0ea6

http://pastebin.com/jGqsNWFE

http://pastebin.com/b9jLs3VZ

http://pastebin.com/1rKnFN5R

http://pastebin.com/vsw0VNxY

http://pastebin.com/bt5Knqs4

http://pastebin.com/8YpcYYRP

http://pastebin.com/cGrGbW78

http://pastebin.com/jwse6Dpf

http://pastebin.com/YXgWAyqu

http://pastebin.com/B6MjUrtK

http://pastebin.com/ciWWEKXR



I checked the ping of my internetprovider and I found it below 50.!!
Download and upload are fine

Perhaps is the very low ping the reason for the long  Initializing -Procedure of Armory.


BtW: Databasebuilder parsed file #700
How many blockfiles are still to come?

[goatpig]

Too many log files. Delete armorylog.txt, armorycpplog.txt and dbLog.txt. Then run Armory again, then post the new logs.

BtW: Databasebuilder parsed file #700
How many blockfiles are still to come?

Build is done, run ArmoryQt, it will start scanning.