philipma1957 (OP)
Legendary
Online
Activity: 4116
Merit: 7851
'The right to privacy matters'
|
|
December 07, 2016, 04:00:45 PM |
|
Just got the R4 THE GOOD 8077GH USING 821 WATTS THE BAD not whisper quiet and no freq or fan speed control I get 62 db give or take 2 db
|
|
|
|
|
|
|
"Bitcoin: the cutting edge of begging technology." -- Giraffe.BTC
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
VirosaGITS
Legendary
Offline
Activity: 1302
Merit: 1068
|
|
December 07, 2016, 04:09:02 PM |
|
Just got the R4
THE GOOD 8077GH USING 821 WATTS
THE BAD not whisper quiet and no freq or fan speed control
I get 62 db give or take 2 db
Thanks phil, well it is as figured. Silence for Chinese = 60dB. Their are all deaf from their 90dB mines. Could you show a screen of the dashboard? Maybe its overcooling the thing and we could hack it down somewhat?
|
|
|
|
gt_addict
|
|
December 07, 2016, 04:58:48 PM |
|
60db? That seems a bit excessive after their claims of a home miner. My S9 is running at 53db at about 1metre away.
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
HagssFIN
Legendary
Offline
Activity: 2436
Merit: 1706
Electrical engineer. Mining since 2014.
|
|
December 07, 2016, 05:21:49 PM |
|
Oh fuck, so they've made an autotune firmware for this too. I was already planning to change my settings freely.
|
|
|
|
VRobb
|
|
December 07, 2016, 05:21:59 PM |
|
Ugh! No fan control?? From BiteMe's own website-R4 manual.pdf: 5.1.3 When "Customize the fan speed percentage” is checked, the fan speed can be controlled by the user. Another undocumented feature! So Happy!!
|
I don't believe in superstition because it's bad luck: 13thF1oor6CAwyzyxXPNnRvu3nhhYeqZdc These aren't the Droids you're looking for: S5 & S7 (Sold), R4B2, R4B4 (RIP), 2x S9 obsolete, 2xS15-28, S17-56, S17-70 Pushing a whopping 1/5 PH! Oh The SPEED!!!
|
|
|
tntdgcr
Full Member
Offline
Activity: 219
Merit: 100
Bitcoin Mining Hosting
|
|
December 07, 2016, 05:29:01 PM |
|
Oh fuck, so they've made an autotune firmware for this too. I was already planning to change my settings freely. are you really surprised though? you're Pro level, this is geared for home-consumer / cross over user. We all have wish lists, but can you imagine the additional support tinkering requires? mix in noobs and purchases on CC , and you have a bad mix.
|
OregonMines is expanding. Are you expanding with us?
|
|
|
HagssFIN
Legendary
Offline
Activity: 2436
Merit: 1706
Electrical engineer. Mining since 2014.
|
|
December 07, 2016, 05:32:17 PM |
|
Oh fuck, so they've made an autotune firmware for this too. I was already planning to change my settings freely. are you really surprised though? you're Pro level, this is geared for home-consumer / cross over user. We all have wish lists, but can you imagine the additional support tinkering requires? mix in noobs and purchases on CC , and you have a bad mix. Well they could just give me the old firmware and old HEX-file for the hash board (I have a PICkit3, so no problem) and I'd have a miner that I thought I would be receiving. I can't see how hard support tinkering that would be, sharing few files for me that already do exist. edit: I wrote them an e-mail and asked about the possibility to "convert" it to be just like the batch 1 R4 miners.
|
|
|
|
|
|
philipma1957 (OP)
Legendary
Online
Activity: 4116
Merit: 7851
'The right to privacy matters'
|
|
December 07, 2016, 08:24:50 PM Last edit: December 07, 2016, 08:36:53 PM by philipma1957 |
|
unboxing notice it is very close to 24 inches long this may cause a size charge for your shipping good packing idea with the center foam and some back up bubble wrap just the controller connected I used an extender to allow the controller to be reached. note the heatsinks are where air is exhausted so you could put some pull fans there better shot of controller note a friction sleeve for the fan wire or a grommet pretty good for bitmain. actual attention to detail power use at the kwatt meter is really good 821-824 using 120 volts and the rosewill quark plat psu
|
|
|
|
TheYankeesWin!
|
|
December 07, 2016, 08:38:23 PM |
|
Do you have a sound meter reading?
|
|
|
|
philipma1957 (OP)
Legendary
Online
Activity: 4116
Merit: 7851
'The right to privacy matters'
|
|
December 07, 2016, 08:39:49 PM |
|
sound levels from about four feet. this is not as quiet as a sidehack modded s7-ln this is not as quiet as an avalon 4.1 that is downvolted and under clocked. In my friends office it is fine It is definitely quieter then the avalon 721. It will need ssh to set freq and fan lower. well that is a guess
|
|
|
|
philipma1957 (OP)
Legendary
Online
Activity: 4116
Merit: 7851
'The right to privacy matters'
|
|
December 07, 2016, 08:46:15 PM |
|
Ugh! No fan control?? From BiteMe's own website-R4 manual.pdf: 5.1.3 When "Customize the fan speed percentage” is checked, the fan speed can be controlled by the user. Another undocumented feature! So Happy!! I can not find that manual
|
|
|
|
VRobb
|
|
December 07, 2016, 08:52:43 PM |
|
Manual is here: https://shop.bitmain.com/files/download/R4%20User%20Manual%20.pdf-FedEx truck came and went since I wasn't home to sign for it... Will pick it up after work and get that thing hashing!
|
I don't believe in superstition because it's bad luck: 13thF1oor6CAwyzyxXPNnRvu3nhhYeqZdc These aren't the Droids you're looking for: S5 & S7 (Sold), R4B2, R4B4 (RIP), 2x S9 obsolete, 2xS15-28, S17-56, S17-70 Pushing a whopping 1/5 PH! Oh The SPEED!!!
|
|
|
|
philipma1957 (OP)
Legendary
Online
Activity: 4116
Merit: 7851
'The right to privacy matters'
|
|
December 07, 2016, 09:26:04 PM |
|
The manual is out of date. print it get a pdf of it asap In my case the sound is low enough that I can use it. But if you want it to be a little slower no can do as The tabs in the red rectangles are gone. This means you are fucked unless they give you the older info. Now I am not a lawyer, but in the USA this would be grounds for a lawsuit if not fixed by bitmaintech. This is my non- lawyer non- qualified opinion.
|
|
|
|
gt_addict
|
|
December 07, 2016, 10:05:49 PM |
|
Seeing as the manual fan speed control is gone do you think it's now correlated to the freq it's set at? Is the freq adjustable at all? Or is that auto?
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
IITravel01
|
|
December 07, 2016, 11:05:19 PM Last edit: December 07, 2016, 11:47:57 PM by IITravel01 |
|
I received mine today also. The Advanced tab in Miner Configuration is gone also. BMminer version is 2.0.0 (Fri Nov 25), HW Vers. 4.8.1.3. Running less than 1/2 hour, I'm getting a average of 557 frequency with 101/79 temp in a 77 deg. F room (fan speed 2,040). 8,064GH/s (avg) w/ HW errors 0.0001%. Power Supply is showing about 875watts pull on a 1,200w Gold PS, so add about 10% at the wall.
|
|
|
|
philipma1957 (OP)
Legendary
Online
Activity: 4116
Merit: 7851
'The right to privacy matters'
|
|
December 08, 2016, 12:01:07 AM |
|
I received mine today also. The Advanced tab in Miner Configuration is gone also. BMminer version is 2.0.0 (Fri Nov 25), HW Vers. 4.8.1.3. Running less than 1/2 hour, I'm getting a average of 557 frequency with 101/79 temp in a 77 deg. F room (fan speed 2,040). 8,064GH/s (avg) w/ HW errors 0.0001%. Power Supply is showing about 875watts pull on a 1,200w Gold PS, so add about 10% at the wall.
Basically the same as me other then the watts. I have a plat you have a gold. My fan is between 1800 and 2100 depends on room temp. My freq is the same as yours 557.
|
|
|
|
HagssFIN
Legendary
Offline
Activity: 2436
Merit: 1706
Electrical engineer. Mining since 2014.
|
|
December 08, 2016, 10:46:15 AM Last edit: December 08, 2016, 11:49:32 AM by HagssFIN |
|
Oh fuck, so they've made an autotune firmware for this too. I was already planning to change my settings freely. are you really surprised though? you're Pro level, this is geared for home-consumer / cross over user. We all have wish lists, but can you imagine the additional support tinkering requires? mix in noobs and purchases on CC , and you have a bad mix. Well they could just give me the old firmware and old HEX-file for the hash board (I have a PICkit3, so no problem) and I'd have a miner that I thought I would be receiving. I can't see how hard support tinkering that would be, sharing few files for me that already do exist. edit: I wrote them an e-mail and asked about the possibility to "convert" it to be just like the batch 1 R4 miners. I got this answer: Dear customer,
The batch 2 differs from batch 1. They have different hardware. The batch 2 can not be converted to first batch by upgrading firmware. The design of auto-tune settings is for better operation stability.
Thanks for your understanding. Has anyone tried to see the bmminer config via SSH? Is there any possibility to write different values for fan control or frequencies? edit: this is how the bmminer.conf looks like with my non-autotune S9
|
|
|
|
|