THREAD_STUCK_IN_DEVICE_DRIVER

[Marcink]

Hi. I need help.
I've build rig of 6GPUs
Morherboard MSI Z97 gaming 5
4 xfx rx480 8gb core edition
2 power color rx480 8gb red devil

Every 2 minutes that info showing up on windows 10 and it restarting system.

When i start mining its all ok. Finding 6 rx480 cards. Working for minute and crashing.

[1715382641]

1715382641

[1715382641]

1715382641

[786sam]

What psu?
Also try underclocking all your cards before turning miner on as  you maybe drawing too much power...

[786sam]

Also try upgrade to windows 10.... i got this message alot in windows 8

[Marcink]

I have 2 x 1000w PSU
And win 10.

[cc4fun]

Try increasing the GPUs' core and mem voltages.

[Marcink]

With which software?

[kilo17]

Use DDU to get the drivers off and then reinstall the drivers.  That will take care of it 90+% of the time

[toptek]

reinstall the drivers make sure to delete any profiles with Afterburner , GPU-z in most cases there is nothing wrong with the card it's a  bad driver install .


https://msdn.microsoft.com/en-us/library/windows/hardware/ff560350(v=vs.85).aspx

[cc4fun]

With which software?

If you're asking about voltage setting software - I recommend WattTool http://www.overclock.net/t/1609782/watttool-a-simple-tool-that-combines-overclocking-with-vrm-monitoring-tweaking-for-rx-400-series

[Marcink]

But why when i trying to install drivers for 1 card its automatically installing all 6.

[xxcsu]

USE 1 PSU

[Marcink]

1000w is to small for that.
Now im working with 5 card. So far so good.
But ive got 7 rx480.

[xxcsu]

1000w is to small for that.
Now im working with 5 card. So far so good.
But ive got 7 rx480.

i would not run a 6 card rig with a 1000 watts psu , your psu is working close to 95-100% with 6 RX 480 setup without proper tune , bios mod.
with a 7 cards setup go for a eVga 1600 watts psu , with 6 cards setup go for a 1200 watts psu , just to stay on the safe side