[SELLING] 1 OZ silver coin IN STOCK

[FFrankie]

The design is overly simple and will feature the same design on the front and the back


Each set contains 2 coins
There will be two different finishes, one coin will be 1oz Silver Matte finish, and the second one will be 1oz Silver Shiny finish.
The engraved numbers will be from 1-15
Will come in an airtight
The design will be stamped into the coin
TRUSTED ESCROW WILL BE USED,

A non-custom holog ram will be provided however, if this is successful and I order a custom hologram all of my past coins will be eligible for 1 if the user pays for shipping.

As there is no spot for a hologram, because of David hornby of magtraonics error the non custom hologram will not be provided, however assuming this series sells out, each customer will be able to get my custom holograms (a few per coin) which will be made after series 3 and before series 4 for the price of a postage stamp


Sets reserviations
1 aucton
2 aucton
3 aucton
4 aucton
5 aucton

https://bitcointalk.org/index.php?topic=1762583.0

^Link to auction


6 chronicsky
7 blazed
8 bithalo
9 Liad.Services gonna be shipped to mj
10 hybridsole
11 Minerjones
12 Hhampuz - "Maybe"
13
14
15


 Users that purchased these will have first dibs at buying a matching serial number

Each set cost $70
Set consists of:
One 1 OZ silver matte finish
One 1 OZ silver shiny finish
Non-Custom Hologram
(user pays shipping)

I am thinking of going with this

http://www.securityhologram.com/index.php?action=buy&id=132&quantity=

^ as a hologram but then I would have a lot of extras.

Feel free to look at my other thread selling coins

https://bitcointalk.org/index.php?topic=1739665.0

^

these will be ready to be shipped no later than February 17th 2017  

What does the "F" to the right of the BTC represent?

Its my initials,

[1714044894]

1714044894

[1714044894]

1714044894

[TMAN]

is this a joke?

[Hhampuz]

Well done sir! These look amazing. They remind me a bit of the bitcoinpenny, that's cool.

What's the material for these coins? Silver/Copper/Brass/Plastic/Wood?

Might be placing an order, good luck with sales!

[bithalo]

Too similar to https://bitcointalk.org/index.php?topic=794678 I think



For now, I'll reserve #8

[FFrankie]

is this a joke?

No it is not a joke, you even knew that I was doing this.

Well done sir! These look amazing. They remind me a bit of the bitcoinpenny, that's cool.

What's the material for these coins? Silver/Copper/Brass/Plastic/Wood?

Might be placing an order, good luck with sales!

Each coin is 1 OZ silver. I updated the OP with that too.

Too similar to https://bitcointalk.org/index.php?topic=794678 I think

For now, I'll reserve #8

That was not my intention if I would have known about that design I would have made my different,, I just put my initials on the coin. Ill update the OP with that note

[Rmcdermott927]

What are the finishes?


Will they be real silver or "silver colored" (we will check)


Where dafuq does the hologram go if you have the same design on both sides?

[TMAN]

is this a joke?

No it is not a joke, you even knew that I was doing this.

Well done sir! These look amazing. They remind me a bit of the bitcoinpenny, that's cool.

What's the material for these coins? Silver/Copper/Brass/Plastic/Wood?

Might be placing an order, good luck with sales!

Each coin is 1 OZ silver. I updated the OP with that too.

Too similar to https://bitcointalk.org/index.php?topic=794678 I think

For now, I'll reserve #8

That was not my intention if I would have known about that design I would have made my different,, I just put my initials on the coin. Ill update the OP with that note

this has to be called the "rim Job" coin - as if it's the same front and back - where else will the fricking holo go???

rimjob - this is better than my bigballs name!

[TMAN]

I shouldn't be digging you out for the innovation,  because we need to encourage it in the community, so I am sorry -  but dude/dudette... you need more planning - I thought you were off to the army in 2 weeks anyway?

[Rmcdermott927]

I shouldn't be digging you out for the innovation,  because we need to encourage it in the community, so I am sorry -  but dude/dudette... you need more planning - I thought you were off to the army in 2 weeks anyway?

Failed the psych?

[TMAN]

I shouldn't be digging you out for the innovation,  because we need to encourage it in the community, so I am sorry -  but dude/dudette... you need more planning - I thought you were off to the army in 2 weeks anyway?

Failed the psych?

or the physical?

[digicoinuser]

Interested but wondering if you'll have the physical coins in hand before taking payment for reservations?

[cryptoheadd]

Congratulations on your first coin release.
Is the rate of $70 fixed?

As that is a lot for an unloaded/unload-able coin.

Watching.  

[FFrankie]

What are the finishes?


Will they be real silver or "silver colored" (we will check)


Where dafuq does the hologram go if you have the same design on both sides?

A matte silver and a shiny silver

It will be real

The hologram would go on one of the sides, and over the little black spot because that would be the indentation for it.

I shouldn't be digging you out for the innovation,  because we need to encourage it in the community, so I am sorry -  but dude/dudette... you need more planning - I thought you were off to the army in 2 weeks anyway?

Navy, and I thought I was they asked me if I wanted to take a job leaving in February but nothing ever came of it so I guess I gotta wait till my original date of august 

Interested but wondering if you'll have the physical coins in hand before taking payment for reservations?

I dont plan on setting up escrow to take the payment until all the orders and auctions are done so I only have to go to the post office once and ship them out all at the same time. But if this isnt possible, than Ill be accepting escrow once I have the finished coins in my hand.

Congratulations on your first coin release.
Is the rate of $70 fixed?

As that is a lot for an unloaded/unload-able coin.

Watching. 

Yes the rate of $70 is fixed, I do not think that is much for 2 one ounce silver coins.

[cryptoheadd]

The hologram would go on one of the sides, and over the little black spot because that would be the indentation for it.

What are the dimensions of these coins?
Wouldn't the little black spot be too "little" for the hologram?

[TMAN]

cool on navy, my daughter starts officer training in a few months..

but back to coin business rimjob - where does the Holo go?

[FFrankie]

The hologram would go on one of the sides, and over the little black spot because that would be the indentation for it.

What are the dimensions of these coins?
Wouldn't the little black spot be too "little" for the hologram?

The coins are 39mm.

I haven't figured out what stock hologram I am going to go with yet.

But I do not think so.

I think the stock hologram will be too big and won't really look "right" on the coin. But since when are DIY coins actually loaded?

if I was to do a custom hologram, I guess something small to cover the black spot and not go over the B would be my only option.

cool on navy, my daughter starts officer training in a few months..

but back to coin business rimjob - where does the Holo go?

The hologram would go over the black spot, because the black spot just represents an indention where you would put the private key.

[TMAN]

sorry im not too good working with such small measurements - but.. isn't that unrealistically small rimjob?

[the_coldplay]

I think those are ugly. no offence.

[cryptoheadd]

The coins are 39mm.

I think the stock hologram will be too big and won't really look "right" on the coin. But since when are DIY coins actually loaded?

I think the stock holograms are usually at least 15x15 mm in size, which will cover the "B" logo, if one were to load the coin.

Is it possible for you to use this design on the front and provide a place to put the hologram on the back side?

I think most people load their DIY coins with the face value of the same. (I do)

[FFrankie]

sorry im not too good working with such small measurements - but.. isn't that unrealistically small rimjob?

Im not too sure what you are asking?

It is a standard size 1 OZ silver coin.

I think those are ugly. no offence.

The design will be stamped so I did not want to make it too detailed for fear that it would not come out looking right.

The coins are 39mm.

I think the stock hologram will be too big and won't really look "right" on the coin. But since when are DIY coins actually loaded?

I think the stock holograms are usually at least 15x15 mm in size, which will cover the "B" logo, if one were to load the coin.

Is it possible for you to use this design on the front and provide a place to put the hologram on the back side?

I think most people load their DIY coins with the face value of the same. (I do)

The one I want to use it in the OP now, it is a square and is 10x10mm it might just cover the B but I do not think I will get them any smaller.

These coins do not even say they are silver on them nor do they have a face value