[NemosMiner] multi algo profit switching NVIDIA/CPU miner

[vitlab]

Hey. tell me what will be the profit on 8x1066
Pool zergpool
Thank you.

[MrPlus]

Another issue, I have set cpu to mine in config file but nemos does not benchmark or mine on cpu. I'm I missing somthing? I'm able to mine fine solo out of nemosminer. It would be nice to have profit switching support for cpu as well. Additionally can I get nemos to use different Miners that are not provided? Assuming cpu switching works, best cpu-miners right now seem to be jaydaa for zcoin, and new cpuminer-opt v3.3.8 for Skein, and neoscrypt. I would like to get support for these 2 Miners if you can help please.

NPlusMiner has CPU Miners

[minerx117]

NemosMiner is made for Nvidia GPU's, cpu support is Handled by https://github.com/MrPlusGH/NPlusMiner/releases .

Best Regards
Nemo

[minerx117]

NemosMiner-v3.4

Monitors mining pools in real-time in order to find the most profitable Algo / Auto Benchmarks Each algo  / Fully automated / Auto Downloads Miners

zpool  hashrefinery  ahashpool  miningpoolhub  nicehash  starpool  zergpool  minemoney  blazepool

https://github.com/nemosminer/NemosMiner/releases
https://github.com/nemosminer/NemosMiner/releases/download/v3.4/NemosMiner-v3.4.zip

instructions:

  Run NemosMiner-v3.4.bat
  1. Config tab
  2. Set your Wallet address and Username
  3. Select your pool
  4. Save Config
  5. Start
  
  note: 2. you only need to change Username if you are using Miningpoolhub

Add:
Etherminer v0.16.0rc1 Fastest Nvidia ethereum miner (no fee) (miningpoolhub/nicehash) ,
https://github.com/ethereum-mining/ethminer/releases

Update:
Bminer v10.2 support for BTG (miningpoolhub) & ethash (miningpoolhub/nicehash),
EWBF v0.5 support equihash144,equihash192,equihash96 coins (zergpool) equihash-btg (miningpoolhub),
ccminerspmodgit10 (fastest open source c11,x16r,x16s),
Cryptodredge v0.9.1 (add cryptonight variants support + speed up in supported Algos),
EnemyZealot v1.18x32 & x64 (speed up in supported Algos),
Trex v0.6.3 (speed up in supported Algos).

Algo updates:
Support for Hex, Sonoa, Polytimos(zergpool) BTG(miningpoolhub)

Fix:
API Bminer/Phoenix now run in native console and record hashrate through API,
add API support for new Etherminer v0.16.0rc1,
star pool DivisorMultiplier.

If you have Windows 7, 8, or 8.1, please update PowerShell: https://www.microsoft.com/en-us/download/details.aspx?id=54616

CCMiner may need 'MSVCR120.dll' if you don't already have it: https://www.microsoft.com/en-gb/download/details.aspx?id=40784

CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it: https://www.microsoft.com/en-us/download/details.aspx?id=48145

running multiple cards its recommended to increase Virtual Memory 64gb is optimal

Requires Nvidia driver 398.22 or newer / 398.36 recommended https://us.download.nvidia.com/Windows/398.36/398.36-desktop-win10-64bit-international-whql.exe

Made For & Tested with 6x1070 6x1070ti 6x1080ti (users have reported up to 12cards working have not tested myself) Some miners do not support more that 9 cards

-ActiveMinerGainPct (percent of advantage that active miner has over candidates in term of profit (default 9%)

Pools variants

  24hr - uses last 24hour Actual API too request profit
     -Low switching rate
  plus - uses advanced calculations to reduce switching
     -Medium switching rate
  normal - uses current estimate API too request profit
     -High switching rate

aaronsace = 1MsrCoAt8qM53HUMsUxvy9gMj3QVbHLazH

nemo = 1QGADhdMRpp9Pk5u5zG1TrHKRrdK5R81TE

MrPlus = 134bw4oTorEJUUVFhokDQDfNqTs7rBMNYy

[restless]

on startup its stays for  "checking version" even tho auto-update is off... and one has to figure that auto-start is off too

[minerx117]

NemosMiner-v3.4.1

Monitors mining pools in real-time in order to find the most profitable Algo / Auto Benchmarks Each algo  / Fully automated / Auto Downloads Miners

zpool  hashrefinery  ahashpool  miningpoolhub  nicehash  starpool  zergpool  minemoney  blazepool

https://github.com/nemosminer/NemosMiner/releases
https://github.com/nemosminer/NemosMiner/releases/download/v3.4.1/NemosMiner-3.4.1.zip

instructions:

  Run NemosMiner.bat
  1. Config tab
  2. Set your Wallet address and Username
  3. Select your pool
  4. Save Config
  5. Start
  
  note: 2. you only need to change Username if you are using Miningpoolhub

Add:
checkbox to the config page to easily enable the optional miners
Start subprocesses without stealing focus thanks to @grantemsley

Update:
EnemyZealot v1.19x32 & x64 (speed up in supported Algos),
Trex v0.6.4 (speed up in supported Algos + add HMQ1725 support),
ccminerspmodgit11 (fastest open source c11,x16r,x16s,x17),

Fix:
Cryptonight-Monero for Mining Pool Hub

Enable Auto Update:
v3.4.1 is the first Version of NemosMiner to have this Option Available, its disabled by default and can be Enabled through the checkbox in the config TAB

If you have Windows 7, 8, or 8.1, please update PowerShell: https://www.microsoft.com/en-us/download/details.aspx?id=54616

CCMiner may need 'MSVCR120.dll' if you don't already have it: https://www.microsoft.com/en-gb/download/details.aspx?id=40784

CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it: https://www.microsoft.com/en-us/download/details.aspx?id=48145

running multiple cards its recommended to increase Virtual Memory 64gb is optimal

Requires Nvidia driver 398.22 or newer / 398.36 recommended https://us.download.nvidia.com/Windows/398.36/398.36-desktop-win10-64bit-international-whql.exe

Made For & Tested with 6x1070 6x1070ti 6x1080ti (users have reported up to 12cards working have not tested myself) Some miners do not support more that 9 cards

-ActiveMinerGainPct (percent of advantage that active miner has over candidates in term of profit (default 9%)

Pools variants

  24hr - uses last 24hour Actual API too request profit
     -Low switching rate
  plus - uses advanced calculations to reduce switching
     -Medium switching rate
  normal - uses current estimate API too request profit
     -High switching rate

aaronsace = 1MsrCoAt8qM53HUMsUxvy9gMj3QVbHLazH

nemo = 1QGADhdMRpp9Pk5u5zG1TrHKRrdK5R81TE

MrPlus = 134bw4oTorEJUUVFhokDQDfNqTs7rBMNYy

___________________________________________________

[minerx117]

Pre Orderd 6x RTX 2080's shipping 20th September i'll have them in hand 23 September
will test and make sure they are Fully supported ASAP

Best Regards
Nemo
 

[restless]

what price ?

[minerx117]

what price ?

$830-850USD each + shipping and import tax

[minerx117]

NemosMiner-v3.4.2

Monitors mining pools in real-time in order to find the most profitable Algo / Auto Benchmarks Each algo  / Fully automated / Auto Downloads Miners

zpool  hashrefinery  ahashpool  miningpoolhub  nicehash  starpool  zergpool  minemoney  blazepool

https://github.com/nemosminer/NemosMiner/releases
https://github.com/nemosminer/NemosMiner/releases/download/v3.4.2/NemosMiner-3.4.2.zip

instructions:

  Run NemosMiner.bat
  1. Config tab
  2. Set your Wallet address and Username
  3. Select your pool
  4. Save Config
  5. Start
  
  note: 2. you only need to change Username if you are using Miningpoolhub

Add:
checkbox to the config page to easily enable "only mining when idle"
checkbox to the config page to easily enable "option to start paused" thanks @grantemsley

Update:
Trex v0.6.6
EnemyZealot v1.20
Ethminer v0.17.0
add Phoenix v3.5c

Fix:
Miners not closing properly and duplicating

Auto Update: Enabled
v3.4.1 was the first Version of NemosMiner to have this Option Available, its disabled by default and can be Enabled through the checkbox in the config TAB

If you have Windows 7, 8, or 8.1, please update PowerShell: https://www.microsoft.com/en-us/download/details.aspx?id=54616

CCMiner may need 'MSVCR120.dll' if you don't already have it: https://www.microsoft.com/en-gb/download/details.aspx?id=40784

CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it: https://www.microsoft.com/en-us/download/details.aspx?id=48145

running multiple cards its recommended to increase Virtual Memory 64gb is optimal

Requires Nvidia driver 398.22 or newer / 399.24 recommended http://us.download.nvidia.com/Windows/399.24/399.24-desktop-win10-64bit-international-whql.exe

Made For & Tested with 6x1070 6x1070ti 6x1080ti (users have reported up to 12cards working have not tested myself) Some miners do not support more that 9 cards

-ActiveMinerGainPct (percent of advantage that active miner has over candidates in term of profit (default 9%)

Pools variants

  24hr - uses last 24hour Actual API too request profit
     -Low switching rate
  plus - uses advanced calculations to reduce switching
     -Medium switching rate
  normal - uses current estimate API too request profit
     -High switching rate

[Oger]

NemosMiner-v3.4.2

Monitors mining pools in real-time in order to find the most profitable Algo / Auto Benchmarks Each algo  / Fully automated / Auto Downloads Miners

zpool  hashrefinery  ahashpool  miningpoolhub  nicehash  starpool  zergpool  minemoney  blazepool

https://github.com/nemosminer/NemosMiner/releases
https://github.com/nemosminer/NemosMiner/releases/download/v3.4.2/NemosMiner-3.4.2.zip

instructions:

  Run NemosMiner.bat
  1. Config tab
  2. Set your Wallet address and Username
  3. Select your pool
  4. Save Config
  5. Start
  
  note: 2. you only need to change Username if you are using Miningpoolhub

Add:
checkbox to the config page to easily enable "only mining when idle"
checkbox to the config page to easily enable "option to start paused" thanks @grantemsley

Update:
Trex v0.6.6
EnemyZealot v1.20
Ethminer v0.17.0
add Phoenix v3.5c

Fix:
Miners not closing properly and duplicating

Auto Update: Enabled
v3.4.1 was the first Version of NemosMiner to have this Option Available, its disabled by default and can be Enabled through the checkbox in the config TAB

If you have Windows 7, 8, or 8.1, please update PowerShell: https://www.microsoft.com/en-us/download/details.aspx?id=54616

CCMiner may need 'MSVCR120.dll' if you don't already have it: https://www.microsoft.com/en-gb/download/details.aspx?id=40784

CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it: https://www.microsoft.com/en-us/download/details.aspx?id=48145

running multiple cards its recommended to increase Virtual Memory 64gb is optimal

Requires Nvidia driver 398.22 or newer / 399.24 recommended http[Suspicious link removed]

Made For & Tested with 6x1070 6x1070ti 6x1080ti (users have reported up to 12cards working have not tested myself) Some miners do not support more that 9 cards

-ActiveMinerGainPct (percent of advantage that active miner has over candidates in term of profit (default 9%)

Pools variants

  24hr - uses last 24hour Actual API too request profit
     -Low switching rate
  plus - uses advanced calculations to reduce switching
     -Medium switching rate
  normal - uses current estimate API too request profit
     -High switching rate

Sometimes, after restarting the recalculation circle, the new miner does not start =(

[agapes]

Finally i got my RTX 2080
Fully tested with Nemosminer
And this is the result of this piece of junk
Not overclocked

https://imgur.com/a/dCbI0wn

Maximum profit is $1 a day
Also not supporting Bminer and DTMS for equihash
Tested with EWBF miner max is 740/sol

Wasting money,
If anyone want it let me know I’ll sell it same price that I bought
Only worked for 3 hours not registered yet all paper work included

[Raziel666]

Finally i got my RTX 2080
Fully tested with Nemosminer
And this is the result of this piece of junk
Not overclocked

https://imgur.com/a/dCbI0wn

Maximum profit is $1 a day
Also not supporting Bminer and DTMS for equihash
Tested with EWBF miner max is 740/sol

Wasting money,
If anyone want it let me know I’ll sell it same price that I bought
Only worked for 3 hours not registered yet all paper work included

You should keep in mind that the existing miners are not optimized for the newer cards. Just my 2c of course...

[Oger]

On the website zergpool, BCD mining was added. But in the program this algorithm does not start.

[STEVLTH]

Disable GPU0 works not as expected for me. I have 2 GPUs on my WS, primary: GTX1060, secondary: GTX1070. When I enable Disable GPU0 it disables GTX1070 and uses GTX1060. (fixed it by editing "SelGPUCC" and "SelGPUDSTM" in config.json)

Also, Excavator ignores this option and use all GPUs. Tried to edit it's JSON file, but NemosMiner rewrites it. (temporarily fixed by deleting Excavator files from OptionalMiners folder, seems, no errors, after that.)

[minerx117]

NemosMiner Monitoring

Keep tabs on all your mining rigs from one place!

https://nemosminer.com

[sky1962]

NemosMiner Monitoring

Keep tabs on all your mining rigs from one place!

http://nemosminer.orgfree.com

Great work !
Please Nemo, is possible view estimated profit also in $ ?

[minerx117]

NemosMiner Monitoring

Keep tabs on all your mining rigs from one place!

http://nemosminer.orgfree.com

Great work !
Please Nemo, is possible view estimated profit also in $ ?

thanks url is now https://nemosminer.com

will look into updating profit to display per day USD/NZD/AUD etc

Best Regards
Nemo

[Khazore]

thanks for the update,

I am currently getting an error when I am trying to benchmark.,   with it seems all miners.  ....retry after 1 second and keeps going for the entire 300 seconds.  

So far both TPRUVOT225 (Bitcore, Tribus), and ccminerspmodgit11 are doing this.    Need some help to figure out why.
This is on Blazepool (regular)


-Khazore

NemosMiner-v3.4.2

Monitors mining pools in real-time in order to find the most profitable Algo / Auto Benchmarks Each algo  / Fully automated / Auto Downloads Miners

zpool  hashrefinery  ahashpool  miningpoolhub  nicehash  starpool  zergpool  minemoney  blazepool

https://github.com/nemosminer/NemosMiner/releases
https://github.com/nemosminer/NemosMiner/releases/download/v3.4.2/NemosMiner-3.4.2.zip

instructions:

  Run NemosMiner.bat
  1. Config tab
  2. Set your Wallet address and Username
  3. Select your pool
  4. Save Config
  5. Start
  
  note: 2. you only need to change Username if you are using Miningpoolhub

Add:
checkbox to the config page to easily enable "only mining when idle"
checkbox to the config page to easily enable "option to start paused" thanks @grantemsley

Update:
Trex v0.6.6
EnemyZealot v1.20
Ethminer v0.17.0
add Phoenix v3.5c

Fix:
Miners not closing properly and duplicating

Auto Update: Enabled
v3.4.1 was the first Version of NemosMiner to have this Option Available, its disabled by default and can be Enabled through the checkbox in the config TAB

If you have Windows 7, 8, or 8.1, please update PowerShell: https://www.microsoft.com/en-us/download/details.aspx?id=54616

CCMiner may need 'MSVCR120.dll' if you don't already have it: https://www.microsoft.com/en-gb/download/details.aspx?id=40784

CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it: https://www.microsoft.com/en-us/download/details.aspx?id=48145

running multiple cards its recommended to increase Virtual Memory 64gb is optimal

Requires Nvidia driver 398.22 or newer / 399.24 recommended http[Suspicious link removed]

Made For & Tested with 6x1070 6x1070ti 6x1080ti (users have reported up to 12cards working have not tested myself) Some miners do not support more that 9 cards

-ActiveMinerGainPct (percent of advantage that active miner has over candidates in term of profit (default 9%)

Pools variants

  24hr - uses last 24hour Actual API too request profit
     -Low switching rate
  plus - uses advanced calculations to reduce switching
     -Medium switching rate
  normal - uses current estimate API too request profit
     -High switching rate

[STEVLTH]

Monitoring Support

v3.5 1060-1080ti : https://github.com/nemosminer/NemosMiner/archive/master.zip

v3.5 2080 / ti : https://github.com/nemosminer/NemosMiner/archive/2080.zip

Best Regards
Nemo

Hi, Nemo. Thank you for the NemosMiner! It very handy and flexible in settings!

Seems everything works fine. But, sometimes it goes into a loop and restarts miner every 30 seconds, even to the same algorithm, until you restart it. I think it can happen after a miner crash (CryptoDredge not very stable, unfortunately). Could you check it, please?

Also, could you make NemosMiner will track if a miner was crashed it immediately restart it?