[ANN] ZERO - fork of Zcash with harder mining params

[ConstantinGR]

I am trying to mine zero with three GTX1070 gpus using optiminer zero 1.2, on Windows.
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:

[2017-11-21 11:13:54.345] [info] [GPU1]  4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0]  4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2]  4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total]  15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.

I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.
On the same rig, I have two AMD RX cards which I use to mine on a different instance of the miner, using the -c switch. These run without any problems.

Any ideas? I mean, besides switching to ethos?

[lutsifer]

I am trying to mine zero with three GTX1070 gpus using optiminer zero 1.2, on Windows.
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:

[2017-11-21 11:13:54.345] [info] [GPU1]  4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0]  4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2]  4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total]  15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.

I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.
On the same rig, I have two AMD RX cards which I use to mine on a different instance of the miner, using the -c switch. These run without any problems.

Any ideas? I mean, besides switching to ethos?

Any chance to run out of memory? RAM or GPU? The ram at least you can monitor.. I think i have the ram problem on linux too..


Don't think that ethos works like a charm

Compare the graphs:

http://zero.forgetop.com/address?t=t1RinhfQ2Ni7U6GQiK4P6be5RLRW5vPCZo2

Both rigs work on ethos. The bigger one create me so much troubles that you can't imagine (as is visible on the graph).
The other one may work months on zero, no problem at all. I don't have any explanation about the differences  then the number of cards. After working for 5 hours the rig runs out of memory and I can't even  open a ssh connection, so I had to set it up on auto reboot for each 4 hrs...

[siagirl]

ALL NEW ZERO POOL

very pleased to announce http://zero.mining4.co.uk is now live with EU and US stratum.

using the correct equihash 192/7 parameters

fast, efficient mining engine

PPLNT payout system, only 0.25% fee

come join us

dont forget to spread some of that love our way we got around 28 blocks yesterday alone.... with only avg 200sols 

low fee 0.25%, what u mining4?

I go in...

Welcome let the blocks rain 

How to make to send me more coins on one transaction. How to rise it to 100-200 for example?

[lutsifer]

We already have Estimated earnings calculation 

Here we go, come miners and let's start forging coins together!

[minerentry]

Hi all, following the project,

can help a little with graphics and ideas,

The slack link seems obsolete, and might be great to redesign the thread soon,

here is a few ideas i have been playing with for branding / Zero visuals... (QR Code should redirect to this bitcointalk thread)

Drop me a PM if you need anything,  

https://image.ibb.co/nHrboR/1.png



https://image.ibb.co/f4yNTR/2.png



https://image.ibb.co/mHeU8R/3.png


https://image.ibb.co/cAf2TR/4.png

Hi renk,


your idea is great and really cool.
I like the fourth graphic very much

simple and serious.


best regards

minerentry


zero pool: http://minerentry.com

 

[crypt0kid]

I'd like to mine this coin, but I can't see to figure out what's going on with the Windows wallet. Does anyone have a status update on a Windows wallet? How soon will we have a windows wallet for easy download?

I understand the necessity of a Windows Wallet and this will be done very soon
There is one you can use in Linux though if you can work with Linux?

We can't give a specific date currently and even if there was a specific date i don't think we should reveal it.
Since a Windows wallet would affect greatly the price (and people would try to profit from the increase in price) we wish to avoid any speculation

It is better to come as a surprise, one day you will wake up and there will be a fully working Windows wallet

Is there a way to run a Linux wallet on my Windows PC? Sorry for the noob question, but if it's possible, I'm all for it.

[minerentry]

I'd like to mine this coin, but I can't see to figure out what's going on with the Windows wallet. Does anyone have a status update on a Windows wallet? How soon will we have a windows wallet for easy download?

I understand the necessity of a Windows Wallet and this will be done very soon
There is one you can use in Linux though if you can work with Linux?

We can't give a specific date currently and even if there was a specific date i don't think we should reveal it.
Since a Windows wallet would affect greatly the price (and people would try to profit from the increase in price) we wish to avoid any speculation

It is better to come as a surprise, one day you will wake up and there will be a fully working Windows wallet

Is there a way to run a Linux wallet on my Windows PC? Sorry for the noob question, but if it's possible, I'm all for it.

hi folks,

it is not a problem, install virtualbox
then download ubuntu as an image

paste ubuntu into virtualbox and install
then you can install the linux wallet as usual
the best thing is, you can then export the entire linux installation with your wallet and save it on usb stick as a backup

virtualbox offers the function to export and import the complete installation with all installed programs
and you already have a backup

If you change your computer, just reinstall your exported virtualbox linux system

best regards
minerentry

happy mining

 

[ConstantinGR]

I am trying to mine zero with three GTX1070 gpus using optiminer zero 1.2, on Windows.
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:

[2017-11-21 11:13:54.345] [info] [GPU1]  4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0]  4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2]  4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total]  15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.

I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.
On the same rig, I have two AMD RX cards which I use to mine on a different instance of the miner, using the -c switch. These run without any problems.

Any ideas? I mean, besides switching to ethos?

Any chance to run out of memory? RAM or GPU? The ram at least you can monitor.. I think i have the ram problem on linux too..

What cards do you run in your rigs? Nvidia or AMD? I think that the problem relates to the Nvidia cards/drivers, since the miner that runs the AMD cards has no problems.

[lutsifer]

I am trying to mine zero with three GTX1070 gpus using optiminer zero 1.2, on Windows.
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:

[2017-11-21 11:13:54.345] [info] [GPU1]  4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0]  4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2]  4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total]  15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.

I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.
On the same rig, I have two AMD RX cards which I use to mine on a different instance of the miner, using the -c switch. These run without any problems.

Any ideas? I mean, besides switching to ethos?

Any chance to run out of memory? RAM or GPU? The ram at least you can monitor.. I think i have the ram problem on linux too..

What cards do you run in your rigs? Nvidia or AMD? I think that the problem relates to the Nvidia cards/drivers, since the miner that runs the AMD cards has no problems.

Both are NVIDIA , one of them run just fine the other one is as you like to say - malaka

[lutsifer]

Whoever is trying right now to use ZCASH mining software inside zero.forgetop.com - please download the proper software from this page:
Optiminers Equihash and Zero

Thank You

[Galahad400]

I am trying to mine zero with three GTX1070 gpus using optiminer zero 1.2, on Windows.
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:

[2017-11-21 11:13:54.345] [info] [GPU1]  4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0]  4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2]  4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total]  15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.

I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.
On the same rig, I have two AMD RX cards which I use to mine on a different instance of the miner, using the -c switch. These run without any problems.

Any ideas? I mean, besides switching to ethos?

Any chance to run out of memory? RAM or GPU? The ram at least you can monitor.. I think i have the ram problem on linux too..

What cards do you run in your rigs? Nvidia or AMD? I think that the problem relates to the Nvidia cards/drivers, since the miner that runs the AMD cards has no problems.

Just went through this on Linux rig. After trying everything including swapping hardware and a couple of clean installs, it turned out that driver 384.98 fixes a couple of bugs. In my case it was the way the card interfaces with the CPU. Run 384.98 and see what happens

[ConstantinGR]

Just went through this on Linux rig. After trying everything including swapping hardware and a couple of clean installs, it turned out that driver 384.98 fixes a couple of bugs. In my case it was the way the card interfaces with the CPU. Run 384.98 and see what happens

I run Optiminer for Windows and driver 388.31. There is no driver 394.98 for Windows, the closest ones to the version you mentioned are 384.94, 385.12 and 385.28.
I will give them a try.

Funny thing, I realized thanks to your post is that two of the nvidia cards were running driver 384.38 and the third one the latest driver 388.31. Now I 've updated them all and will do some tests, thanks for the suggestion.

[lutsifer]

Guys,

https://zeroexplorer.com seems to have expired ssl? I think this is kind of very urgent?

[lutsifer]

I am trying to mine zero with three GTX1070 gpus using optiminer zero 1.2, on Windows.
The miner works for about 10-12 min (or even less time) and then it stops mining.
I am using miner-entry pool, if this is relevant.
These are the lines that usually show up:

[2017-11-21 11:13:54.345] [info] [GPU1]  4.8 I/s 11.4 S/s (5s) 5.0 I/s 9.7 S/s (1m)
[2017-11-21 11:13:54.873] [info] [GPU0]  4.8 I/s 9.0 S/s (5s) 4.9 I/s 9.4 S/s (1m)
[2017-11-21 11:13:56.757] [info] [GPU2]  4.8 I/s 8.2 S/s (5s) 4.9 I/s 9.6 S/s (1m)
[2017-11-21 11:13:57.948] [info] [Total]  15.0 I/s 27.8 S/s (5s) 14.8 I/s 28.8 S/s (1m)
[2017-11-21 11:13:58.239] [error] OpenCL error: readBuffer Solutions0 (CL_OUT_OF_RESOURCES)
[2017-11-21 11:13:58.244] [info] Press any key to exit application.

I have tried different gpu settings (default or overclocked core and memory clocks) and different optiminer pci-modes (zero up to three) as well as the experimental-kernel setting without any luck.
The miner either hangs or produces the above message.
On the same rig, I have two AMD RX cards which I use to mine on a different instance of the miner, using the -c switch. These run without any problems.

Any ideas? I mean, besides switching to ethos?

Any chance to run out of memory? RAM or GPU? The ram at least you can monitor.. I think i have the ram problem on linux too..

What cards do you run in your rigs? Nvidia or AMD? I think that the problem relates to the Nvidia cards/drivers, since the miner that runs the AMD cards has no problems.

Just went through this on Linux rig. After trying everything including swapping hardware and a couple of clean installs, it turned out that driver 384.98 fixes a couple of bugs. In my case it was the way the card interfaces with the CPU. Run 384.98 and see what happens

I am with 384.98 and having almost same problems...

[lutsifer]

Guys,

https://zeroexplorer.com seems to have expired ssl? I think this is kind of very urgent?

It is not only the SSL, website is down!

What happens?

[lutsifer]

Guys,

https://zeroexplorer.com seems to have expired ssl? I think this is kind of very urgent?

It is not only the SSL, website is down!

What happens?

Ok, I did setup one quick quick... but I guess the choice wasn't exactly the best one...

http://zeroexplorer.forgetop.com/


Please fix the old one...

[crypt0kid]

I'd like to mine this coin, but I can't see to figure out what's going on with the Windows wallet. Does anyone have a status update on a Windows wallet? How soon will we have a windows wallet for easy download?

I understand the necessity of a Windows Wallet and this will be done very soon
There is one you can use in Linux though if you can work with Linux?

We can't give a specific date currently and even if there was a specific date i don't think we should reveal it.
Since a Windows wallet would affect greatly the price (and people would try to profit from the increase in price) we wish to avoid any speculation

It is better to come as a surprise, one day you will wake up and there will be a fully working Windows wallet

Is there a way to run a Linux wallet on my Windows PC? Sorry for the noob question, but if it's possible, I'm all for it.

hi folks,

it is not a problem, install virtualbox
then download ubuntu as an image

paste ubuntu into virtualbox and install
then you can install the linux wallet as usual
the best thing is, you can then export the entire linux installation with your wallet and save it on usb stick as a backup

virtualbox offers the function to export and import the complete installation with all installed programs
and you already have a backup

If you change your computer, just reinstall your exported virtualbox linux system

best regards
minerentry

happy mining

 

Minerentry,
Here are the options for Virtualbox:
 
Windows hosts
OS X hosts
Linux distributions
Solaris hosts

I'm assuming that I'm supposed to download Windows hosts, correct?

[lutsifer]

OK, since the original zero explorer is unavailable at the moment, you can use ours from this url:

http://zeroexplorer.forgetop.com/

It is already synchronized and fully operational.

Cheers  && Happy Mining

[Equalizer1970]

Is there a place I can still download the window wallet from?

[seesky]

I feel that this project is very good, and I'm looking forward to the next step of the team, I will continue to pay attention to this project, hope that the team also make unremitting efforts, earnestly planning and implementation, team refueling!