lenart_o
Member
Offline
Activity: 119
Merit: 10
|
|
February 23, 2017, 08:20:45 AM |
|
I got confirmation of payment , but also waiting for tracking number I pay yesterday
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
February 23, 2017, 08:22:21 AM |
|
same, they said to wait 3 business day, 1 passed
|
|
|
|
M1n0r
Member
Offline
Activity: 87
Merit: 10
|
|
February 23, 2017, 08:31:21 AM |
|
Ok thx for your answers. Edit: I hope they will send it today.
|
|
|
|
wlefever
Legendary
Offline
Activity: 1174
Merit: 1001
|
|
February 23, 2017, 01:04:17 PM Last edit: February 23, 2017, 01:48:12 PM by wlefever |
|
Waiting on tracking number as well. Within 2 days of payment they will arrange shiment and provide tracking number according to their email. This evening will technically be day 2 from when they confirmed my payment because of different time zones.
EDIT: Received #, can't wait to have these set up!
|
|
|
|
Longsnowsm
|
|
February 23, 2017, 01:37:04 PM |
|
I just received my tracking number from Baikal. So you just have to be patient. Baikal is working through the orders and will get them out to us. If this is your first Giant I think you are going to like it. It is a pretty nice miner.
|
|
|
|
M1n0r
Member
Offline
Activity: 87
Merit: 10
|
|
February 23, 2017, 01:38:46 PM |
|
Its all good me too I receve the tracking. Edit: Its my first ASIC miner I start mining on graphic card. Some months ago.
|
|
|
|
Rupucers
Member
Offline
Activity: 105
Merit: 10
|
|
February 23, 2017, 01:41:58 PM |
|
Be calm. They also sent mine quad 2-3 days after payment.
|
|
|
|
DebitMe
Legendary
Offline
Activity: 2800
Merit: 1012
Get Paid Crypto To Walk or Drive
|
|
February 23, 2017, 04:11:34 PM |
|
I just received my tracking number from Baikal. So you just have to be patient. Baikal is working through the orders and will get them out to us. If this is your first Giant I think you are going to like it. It is a pretty nice miner.
Whats the noise level of a miner? I imagine it can't be very loud since it only used roughly 250 watts, but am curious. Also, does each one take 2 8 pin connectors? I will need to look for a PSU that has 6 8 pin connectors to power my 3 in that case.
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
February 23, 2017, 04:36:09 PM |
|
I just received my tracking number from Baikal. So you just have to be patient. Baikal is working through the orders and will get them out to us. If this is your first Giant I think you are going to like it. It is a pretty nice miner.
Whats the noise level of a miner? I imagine it can't be very loud since it only used roughly 250 watts, but am curious. Also, does each one take 2 8 pin connectors? I will need to look for a PSU that has 6 8 pin connectors to power my 3 in that case. some video on youtube say 50db other 70db
|
|
|
|
Longsnowsm
|
|
February 23, 2017, 04:55:49 PM |
|
According to the sound meter on my phone it shows 64db at 3" from the fan, and about 44db at about 3 feet away from the miner. It is not an annoying sound, it is a very nice home miner. So far my favorite of the ASIC rigs I have played with or used.
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
February 23, 2017, 05:07:36 PM |
|
According to the sound meter on my phone it shows 64db at 3" from the fan, and about 44db at about 3 feet away from the miner. It is not an annoying sound, it is a very nice home miner. So far my favorite of the ASIC rigs I have played with or used.
can you tell me if there is a switch, or you just plug it in the psu and it run?
|
|
|
|
felixbrucker
|
|
February 23, 2017, 06:15:23 PM |
|
According to the sound meter on my phone it shows 64db at 3" from the fan, and about 44db at about 3 feet away from the miner. It is not an annoying sound, it is a very nice home miner. So far my favorite of the ASIC rigs I have played with or used.
can you tell me if there is a switch, or you just plug it in the psu and it run? only pcie power plugs, no switch
|
|
|
|
Longsnowsm
|
|
February 23, 2017, 06:32:56 PM |
|
According to the sound meter on my phone it shows 64db at 3" from the fan, and about 44db at about 3 feet away from the miner. It is not an annoying sound, it is a very nice home miner. So far my favorite of the ASIC rigs I have played with or used.
can you tell me if there is a switch, or you just plug it in the psu and it run? only pcie power plugs, no switch Felixbrucker is correct, there are no switches on the miner. You can turn it on and off by the PSU power switch. Not idea if you are trying to share the PSU with a GPU rig.
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
February 23, 2017, 06:43:04 PM Last edit: February 23, 2017, 07:23:54 PM by Amph |
|
According to the sound meter on my phone it shows 64db at 3" from the fan, and about 44db at about 3 feet away from the miner. It is not an annoying sound, it is a very nice home miner. So far my favorite of the ASIC rigs I have played with or used.
can you tell me if there is a switch, or you just plug it in the psu and it run? only pcie power plugs, no switch Felixbrucker is correct, there are no switches on the miner. You can turn it on and off by the PSU power switch. Not idea if you are trying to share the PSU with a GPU rig. yes this is the issue, if i turn the psu on the miner turn on but then i need to press the switch of the motherboard to turn that on also, which usually will turn on the psu... normally the psu isn't working if you just turn on its switch but if the asic require the electricity it will switch it on like when you turn on the MB right?
|
|
|
|
felixbrucker
|
|
February 23, 2017, 07:11:29 PM |
|
According to the sound meter on my phone it shows 64db at 3" from the fan, and about 44db at about 3 feet away from the miner. It is not an annoying sound, it is a very nice home miner. So far my favorite of the ASIC rigs I have played with or used.
can you tell me if there is a switch, or you just plug it in the psu and it run? only pcie power plugs, no switch Felixbrucker is correct, there are no switches on the miner. You can turn it on and off by the PSU power switch. Not idea if you are trying to share the PSU with a GPU rig. yes this is the issue, if i turn the psu on the miner turn on but then i need to press the switch of the motherboard to turn that on also, which usually will turn on the psu... normally the psu isn't working if you just turn on its switch but if the asic require the electricity it will switch it on like you when you turn on the MB right? i have had connected it like that, it wont work, your mb will have to connect the two pins form the 24 pin connector internally
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
February 23, 2017, 07:23:12 PM |
|
According to the sound meter on my phone it shows 64db at 3" from the fan, and about 44db at about 3 feet away from the miner. It is not an annoying sound, it is a very nice home miner. So far my favorite of the ASIC rigs I have played with or used.
can you tell me if there is a switch, or you just plug it in the psu and it run? only pcie power plugs, no switch Felixbrucker is correct, there are no switches on the miner. You can turn it on and off by the PSU power switch. Not idea if you are trying to share the PSU with a GPU rig. yes this is the issue, if i turn the psu on the miner turn on but then i need to press the switch of the motherboard to turn that on also, which usually will turn on the psu... normally the psu isn't working if you just turn on its switch but if the asic require the electricity it will switch it on like you when you turn on the MB right? i have had connected it like that, it wont work, your mb will have to connect the two pins form the 24 pin connector internally what do you mean? can i just switch on the motherboard first and plug the asic later into the psu?
|
|
|
|
felixbrucker
|
|
February 23, 2017, 08:56:23 PM |
|
According to the sound meter on my phone it shows 64db at 3" from the fan, and about 44db at about 3 feet away from the miner. It is not an annoying sound, it is a very nice home miner. So far my favorite of the ASIC rigs I have played with or used.
can you tell me if there is a switch, or you just plug it in the psu and it run? only pcie power plugs, no switch Felixbrucker is correct, there are no switches on the miner. You can turn it on and off by the PSU power switch. Not idea if you are trying to share the PSU with a GPU rig. yes this is the issue, if i turn the psu on the miner turn on but then i need to press the switch of the motherboard to turn that on also, which usually will turn on the psu... normally the psu isn't working if you just turn on its switch but if the asic require the electricity it will switch it on like you when you turn on the MB right? i have had connected it like that, it wont work, your mb will have to connect the two pins form the 24 pin connector internally what do you mean? can i just switch on the motherboard first and plug the asic later into the psu? what i mean: psu connected to mb and miner -> switch on the mb and the miner will turn on as well psu connected to mb and miner -> switch on the psu and nothing will power on (besides when the mb auto powers on after it lost power)
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
February 23, 2017, 09:34:32 PM |
|
According to the sound meter on my phone it shows 64db at 3" from the fan, and about 44db at about 3 feet away from the miner. It is not an annoying sound, it is a very nice home miner. So far my favorite of the ASIC rigs I have played with or used.
can you tell me if there is a switch, or you just plug it in the psu and it run? only pcie power plugs, no switch Felixbrucker is correct, there are no switches on the miner. You can turn it on and off by the PSU power switch. Not idea if you are trying to share the PSU with a GPU rig. yes this is the issue, if i turn the psu on the miner turn on but then i need to press the switch of the motherboard to turn that on also, which usually will turn on the psu... normally the psu isn't working if you just turn on its switch but if the asic require the electricity it will switch it on like you when you turn on the MB right? i have had connected it like that, it wont work, your mb will have to connect the two pins form the 24 pin connector internally what do you mean? can i just switch on the motherboard first and plug the asic later into the psu? what i mean: psu connected to mb and miner -> switch on the mb and the miner will turn on as well psu connected to mb and miner -> switch on the psu and nothing will power on (besides when the mb auto powers on after it lost power) ah, then it work normally, i just plug in the psu and then turn on the MB, the psu is always on, i never shut down it completely
|
|
|
|
Marvell1
Legendary
Offline
Activity: 2562
Merit: 1136
Leading Crypto Sports Betting & Casino Platform
|
|
February 24, 2017, 12:12:29 AM |
|
I anyone else drops out I am in for two shipping to USA
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
ANDYSK
Newbie
Offline
Activity: 17
Merit: 0
|
|
February 24, 2017, 12:46:42 PM |
|
Hi, anybody knows how to connect these miners and max how much pieces can be connected?? How to do it?? I found only 2 videos about preliminary settings. Nothing else on the web. https://youtu.be/DjAOvdn7PewWaiting 7 pcs. Arriving on tuesday. Do you think I can connect all 7??
|
|
|
|
|