GROUPBUY 4 - closed

[bittawm]

hey all,

we have sold 100s of units so far and want to keep supporting the bitcoin community.

right now we have 30 units up for sale, let me be clear on how this group buy works

we need customers to list the amount of giants they want ( http://baikalminer.com/ShowProducts.asp?id=468 )

just reply to this thread

once we hit 30 the deal is over

get in fast.



either deposit to my sig address (and PM me TX ID)

or just hold your money until we get all 30 (please dont commit if you plan on spending coins, it will just stuff it up for the rest)

either way its fully refundable in the event that this deal doesnt happen

I had to pull major strings guys


this had a limit of 48 hours (yesterday) but I am extending it to 48 hours from this post









AWESOMELY AWESOME PURCHASERS:

who:              qty:
cptfisher:      3
Amph            1
ihong154      7
Longsnowsm 1    
wlefever        3
charles2k      3
scavern        1
IvanDog       1
ayoungtech 2
DebitMe        1
lenart_o       4
ANDYSK        5
camando      1
M1n0r         1


total: 34/30                  

[Longsnowsm]

Thank you Bittawm!  That is very helpful to see where we are with this group buy!   

[cptfisher]

as i said i want to take 3 units . can you please send me all the information on how to proceed ?
shipment how much will be ? do let me know

[wlefever]

I'm in for 3

[miropp]

is it incl. shipping?

[charles2k]

3 for me

[bittawm]

 i will double check but I think it is free shipping.

already up to 18 units

did someone say..... hotcakes?

[bittawm]

as i said i want to take 3 units . can you please send me all the information on how to proceed ?
shipment how much will be ? do let me know

either send btc to my sig address or just wait until we have 30 units then I will send instructions

[Truthchanter]

How much $usd these make per day? when is estimated ROI?

[ayoungtech]

2 for me

[felixbrucker]

with free shipping id be in for two

[jackg]

How much $usd these make per day? when is estimated ROI?

Probaby best to check a mining calculator. These devices mine a few different coins so it is best to check what each can make profitwise. Also you haveto consider your power cost and cost of anything else required (such as the psu not being included).

[DebitMe]

I would take 1, but i will only send payment to a baikal representative

[KougarLOB]

I am interested but first I too want to know if 1900USD covers everything: shipping and Customs.

Got a Quad and two Minis on the last buy - very happy.  Thanks for working out these deals.

[M1n0r]

I am interested for one if shipping and custom are included for EU.
But I need a couple of day to buy BTC for the payement.
I prefere to pay directly to Baikal.

[bittawm]

I would take 1, but i will only send payment to a baikal representative

do you want me to put you down for one?

I am an agent for Baikal however if you want to pay them directly that is fine

Cheers

[KougarLOB]

I would take 1, but i will only send payment to a baikal representative

do you want me to put you down for one?

I am an agent for Baikal however if you want to pay them directly that is fine

Cheers

Bittawm,
Several folks asking if 1900USD includes Customs and shipping.  Could you confirm yes or no, please?  I assume yes, but we want to be sure.  Thanks.

[bittawm]

I would take 1, but i will only send payment to a baikal representative

do you want me to put you down for one?

I am an agent for Baikal however if you want to pay them directly that is fine

Cheers

Bittawm,
Several folks asking if 1900USD includes Customs and shipping.  Could you confirm yes or no, please?  I assume yes, but we want to be sure.  Thanks.

yes this price includes shipping, value declared is low

[M1n0r]

How many is the exact price in BTC ?

[bittawm]

How many is the exact price in BTC ?

right now 1.804btc

[scavern]

put me down for one please.

[felixbrucker]

with free shipping id be in for two

put me down for one please.

me as well, thanks

[bittawm]

wait on guys, I have fucked up.

Baikal has just informed me that shipping is on top,

I take responsibility for this one and if anyone wants to pull out we understand

sorry guys that one is on me, let me know if your in or out

[felixbrucker]

wait on guys, I have fucked up.

Baikal has just informed me that shipping is on top,

I take responsibility for this one and if anyone wants to pull out we understand

sorry guys that one is on me, let me know if your in or out

i have requested a shipping quote for two unites from baikal, will update you on my status

[Amph]

wait on guys, I have fucked up.

Baikal has just informed me that shipping is on top,

I take responsibility for this one and if anyone wants to pull out we understand

sorry guys that one is on me, let me know if your in or out

i'm still in, unless the shipping is crazy and go above $2k in total

[M1n0r]

So how many it cost with shipping in $ and BTC ?

[cptfisher]

i need to know how much is the price for shipping 3 units to latvia.

[scavern]

Disappointing about the shipping. Hopefully we get reasonable shipping quotes.

I am curious to know what everyone expects their ROI to be? I am looking at about 8 to 9 months.

[Amph]

Disappointing about the shipping. Hopefully we get reasonable shipping quotes.

I am curious to know what everyone expects their ROI to be? I am looking at about 8 to 9 months.

nah just earlymine new scam coin, you can roi in 1 month if lucky

[scavern]

Yeah but you have to be quick with the scam coin mining, and I always seem to miss the initial launch.

[ayoungtech]

PM sent for shipping quote.

[scavern]

pretty sure he is inundated with requests for shipping quotes.

[felixbrucker]

my shipping cost for two units is around 143usd, my two orders will remain

[scavern]

felixbrucker where are you located?

[felixbrucker]

felixbrucker where are you located?

im located in germany

[ayoungtech]

felixbrucker where are you located?

im located in germany

Any mention where they are being shipped from? China?

[felixbrucker]

felixbrucker where are you located?

im located in germany

Any mention where they are being shipped from? China?

yes china, dhl express

[Rupucers]

yep, DHL unless you specifically ask for other postage opttion. Like EMS.

[scavern]

I am in South Africa, so I am guessing my shipping quote will be about $150

[ANDYSK]

Hi, I would buy 5 pieces for testing. I am from Slovakia.

[Truthchanter]

Put me down for 1.

Also what PSU do you guys recommend?

[Longsnowsm]

Put me down for 1.

Also what PSU do you guys recommend?

The giant is very easy to run.  I have one running on a small 550w PSU and it hardly ever kicks on the fan so these things are very easy to power.

[ayoungtech]

I'm still in for 2, pending shipping cost.

[DebitMe]

I would take 1, but i will only send payment to a baikal representative

do you want me to put you down for one?

I am an agent for Baikal however if you want to pay them directly that is fine

Cheers

yes I am in for one please

[Amph]

Put me down for 1.

Also what PSU do you guys recommend?

The giant is very easy to run.  I have one running on a small 550w PSU and it hardly ever kicks on the fan so these things are very easy to power.

after you connect it with the 8 pin you just need to power up the psu right? can be connected to a whole gpu rig?

[Longsnowsm]

There are 2 8 pin connectors per board(only one needs to be connected), and there are 2 boards per Giant.  They show that you can use a 6 pin connector in the videos online instead of a 8 pin. 

So you will need 2 free pcie connectors from your PSU.  So in theory you could connect one of these up to a PSU in a GPU rig if you have the spare capacity.  I haven't tried it in that configuration.

[Amph]

There are 2 8 pin connectors per board(only one needs to be connected), and there are 2 boards per Giant.  They show that you can use a 6 pin connector in the videos online instead of a 8 pin. 

So you will need 2 free pcie connectors from your PSU.  So in theory you could connect one of these up to a PSU in a GPU rig if you have the spare capacity.  I haven't tried it in that configuration.

yeah i have four 2 x 8 pin with my rm1000i, 3 are connected to six gpu, the last one in theory should be good for the giant

[IvanDog]

Good action! I agree! Put it on me + 1

Good earnings to all colleagues!

[bittawm]

hey guys, contact Baikal on skype for shipping quotes, its roughly 150usd for 2 pieces for fast shipping

I am overwhelmed with shipping quote requests and i genuinely do not know what it costs,  but i do know that it is not super expensive

[bittawm]

23 units gone guys

[scavern]

Cool. I contacted Baikal - awaiting shipping quote from them.

They may have to extend this 48 hour nonsense though, if they want the sales that is...

[Longsnowsm]

I looks like they are going to go by the number of units and not the 48 hours thing...  At this rate they will have the 30 units sold today. 

[lenart_o]

Hi
I'll take 4
cheers

[M1n0r]

I have contacted them on skype to. But they are away I am waiting the answer.

[bittawm]

Hi
I'll take 4
cheers

youre the man len

[bittawm]

I looks like they are going to go by the number of units and not the 48 hours thing...  At this rate they will have the 30 units sold today. 

dead right son, ive been watching these things for a while now, the roi is getting less and less instead of more and more

[scavern]

You should find out if they will give a lower price for every 10 increments, ie. if we hit 40 it is $1800

[Amph]

i want to know there is a switch to turn the mine on or off, or it simply turn on when you plug it?

also can you solo mine with it?

[scavern]

Judging by the images I have seen there isn't a switch, but someone who already owns one will have to verify this.

[scavern]

I'm curious to know how many people will be connecting this to a UPS or surge protector?

[DebitMe]

When can we expect these to ship?  If I contact Baikal directly and get them mine paid will shipping be sent?

[scavern]

from what i understand they will only ship @ $1900 + shipping once 30 orders have been reached.

[ANDYSK]

Hi, I would buy 5 pieces for testing. I am from Slovakia.

Hello, and what about me??? What is goin' on?? I wanted to place order to Baikal and talked with "Haley". She has told me that here is a group buy. Then I have registered.
And now you think that i am scam or what??
I wanted 5 miners and can not find my order...
WTF?? Just because I am newbie??

[bittawm]

Hi, I would buy 5 pieces for testing. I am from Slovakia.

Hello, and what about me??? What is goin' on?? I wanted to place order to Baikal and talked with "Haley". She has told me that here is a group buy. Then I have registered.
And now you think that i am scam or what??
I wanted 5 miners and can not find my order...
WTF?? Just because I am newbie??

thats not a problem you can be added now

[bittawm]

ok we officially have 32 units sold,

everyone organize funds please,

if anyone else wants some they better put their name and bitcoins forward quickly before they miss out

will update soon

[scavern]

How do we organize funds if we don't know shipping cost?

[Longsnowsm]

So at this point I assume each of us needs to contact Baikal via email and provide our BCT ID to validate we are on the list?  Then we will get the price in BTC to include shipping?  Or is there another preferred method you would prefer that we handle this?  Thanks! 

[scavern]

What probably should happen is that bittawm pm's each of us with some unique code with we can use with the order so Baikal knows that there aren't any imposters...

[bittawm]

What probably should happen is that bittawm pm's each of us with some private code with we can use with the order so Baikal knows that there aren't any imposters...

dont sweat it, if people take advantage of this deal within the short term that is fine (even if they arnt officially on the list)

because the deal will expire once we have finished up and then no one will be getting them for 1900usd

[scavern]

Well it is just after midnight where I am... I will only be able to organize funds tomorrow.

Please clarify exactly what steps each of us need to follow.

Thanks

[bittawm]

So at this point I assume each of us needs to contact Baikal via email and provide our BCT ID to validate we are on the list?  Then we will get the price in BTC to include shipping?  Or is there another preferred method you would prefer that we handle this?  Thanks! 

contact baikal, say your name, make your purchase, quote tx id to them

[bittawm]

its day time for me right now, so i know time zones are stuffing us up a bit.

dont worry about when the deal expires

as long as your on the list and sorting out funds ASAP it will be all go

[ANDYSK]

The shipping cost will be not to high. Today I placed order on 2pcs of Baikal x11 mini and I was charged by $41.
DHL - Slovakia
Slovakia is in Europe - just for some people 😂

[scavern]

Fantastic. I just emailed Baikal for final price. Hopefully I get a response soon!

[ANDYSK]

Can I modify 5 pcs to 6??
6 would be just fine for 1600W EVGA PSU.
Hope i am not too late..

[scavern]

I somehow doubt they will turn you away...

[DebitMe]

Just sent Baikal an email, hopefully I will get final price soon so I can pay and get my unit on its way to me.

[M1n0r]

I am in but I need to know how many cost the shipping.
And the baikal skype dont answer me.
I will have all the BTC tommorow.

[ANDYSK]

I somehow doubt they will turn you away...

It will never happens. There will be no reason :-)

[Longsnowsm]

We just have to be patient for it to be daytime in China... I am sure Baikal is checking his eyelids for holes right now.... IE sleeping! LOL

[M1n0r]

I dont understand why you dont put me on the list.
I say you that I was ok.

[bittawm]

I dont understand why you dont put me on the list.
I say you that I was ok.

sorry I am very busy with my day business, I am trying to respond as fast as possible

[M1n0r]

Thx because I have buy Bitcoin specialy for this.
In about seven hours the time that office are open I will have all the Btc.
I was in the first to say that I was interessed.

[Amph]

can we send the money directly to them? not that i don't trust you but having all the money in the hands of a single person it's not secure

i'm contacting them for this

[ANDYSK]

Baikal just emailed me that only 30 pcs are available for that price..

[M1n0r]

Yes I emailed them to they say this price is for 30 but for more I think it stile the same.
And I asked to pay directly to them.
They say that they must check with bittawn.
I just have see yet that all my Btc are here.
And they say me via skype that for 1 Giant DHL delivery 94$ in Europe.

[bittawm]

hold on, I am having trouble communicating with the time difference.

anyone on the list is covered and unfortunately anyone not on the list isnt

[felixbrucker]

hold on, I am having trouble communicating with the time difference.

anyone on the list is covered and unfortunately anyone not on the list isnt

im not on the list though i was one of the first to answer after your statement about shipping cost, as well as one of the early ones before:

with free shipping id be in for two

with free shipping id be in for two

put me down for one please.

me as well, thanks

my shipping cost for two units is around 143usd, my two orders will remain

does that mean i posted for nothing?

[M1n0r]

Me too I speak to you in the beggining I really hope we can all get our order.
So I dont gone lose some money buying Btc at high price for fast delivery.

[ANDYSK]

For those who usually hold some money in BTC these Giants will be cheaper thanks to rise of BTC in the last 2-3 weeks..

[Amph]

For those who usually hold some money in BTC these Giants will be cheaper thanks to rise of BTC in the last 2-3 weeks..

yes but if you wait 3 months for btc to hit $2k and pay only 1 btc for a giant you are still losing 3 months of mining that would net you $1000

in the end it's the same, unless btc skyrocket in 1 week to 2k or more then you may have a point, but it's a gamble...

[bittawm]

HOW TO PURCHASE

EMAIL : baikal@baikalminer.com

STATE YOUR USER NAME AND ALSO YOUR ADDRESS AND ALSO MAKE THE SUBJECT GROUP BUY 4 BITTAWM

LET THEM KNOW QUANTITIES AND THEY WILL TAKE OVER

CHEERS

[M1n0r]

Ok thanks my mail is just send.

[M1n0r]

HOW TO PURCHASE

EMAIL : baikal@baikalminer.com

STATE YOUR USER NAME AND ALSO YOUR ADDRESS AND ALSO MAKE THE SUBJECT GROUP BUY 4 BITTAWM

LET THEM KNOW QUANTITIES AND THEY WILL TAKE OVER

CHEERS

I send PM for you and send message in forum but you don't response. I wrote yesterday I need one pcs from Baikal Giant miner, but you don't add to list. Why?

I was not in the list but I speak directly to Baikal like Bittawm say and all seem to be ok.
Just try it.
I paid 1.881Btc for 1 Giant and shippement.
I just waiting that Baikal give me a final confirmation for my order.
Thanks Bittawn

[bittawm]

HOW TO PURCHASE

EMAIL : baikal@baikalminer.com

STATE YOUR USER NAME AND ALSO YOUR ADDRESS AND ALSO MAKE THE SUBJECT GROUP BUY 4 BITTAWM

LET THEM KNOW QUANTITIES AND THEY WILL TAKE OVER

CHEERS

I send PM for you and send message in forum but you don't response. I wrote yesterday I need one pcs from Baikal Giant miner, but you don't add to list. Why?

I was not in the list but I speak directly to Baikal like Bittawm say and all seem to be ok.
Just try it.
I paid 1.881Btc for 1 Giant and shippement.
I just waiting that Baikal give me a final confirmation for my order.
Thanks Bittawn

no worries mate

[scavern]

If people that are not in the list are emailing then there is a chance not everyone will get stock. They said there is only 30 available at that price?

[M1n0r]

Its all good for me.

[cptfisher]

sent email to baikal. lets see what they say !

[Amph]

no response from them so far after i sent the money...

[Longsnowsm]

I am still trying to get a confirmation that I am on the list so that I can buy one.  I received an email stating that Baikal needed to confirm with Bittawm, but I have heard nothing back that I am confirmed so that I can send payment.  Looks like I will need some help with the confirmation.

[wlefever]

They replied to my email group buy is now invalid.  Probably from the BTC price action.

[Amph]

They replied to my email group buy is now invalid.  Probably from the BTC price action.

this mean that the deal ended?

[Truthchanter]

hold on, I am having trouble communicating with the time difference.

anyone on the list is covered and unfortunately anyone not on the list isnt

Why am I not on the list? I posted earlier in this thread I was down for 1 before the 30 was accounted for.

Edit: I messaged baikalminer on skype and they said they could try to squeeze me in anyway though!

[wlefever]

They replied to my email group buy is now invalid.  Probably from the BTC price action.

this mean that the deal ended?

IDK but I was one of the first 15 and they said the group buy 20% was invalid now...

[Longsnowsm]

They replied to my email group buy is now invalid.  Probably from the BTC price action.

Did Baikal look to see you are on the list?  Or are they just cancelling the entire group buy?  I have heard nothing back yet after emailing them a second time to ask about the confirmation.

[wlefever]

They replied to my email group buy is now invalid.  Probably from the BTC price action.

Did Baikal look to see you are on the list?  Or are they just cancelling the entire group buy?  I have heard nothing back yet after emailing them a second time to ask about the confirmation.

Unless they are mistaken I gave them my btctalk username which shows me on the list of 30.  Will see what they say.

EDIT: They responded with the quote of $1900 per so it must have been a mistake.  

[Longsnowsm]

They replied to my email group buy is now invalid.  Probably from the BTC price action.

Did Baikal look to see you are on the list?  Or are they just cancelling the entire group buy?  I have heard nothing back yet after emailing them a second time to ask about the confirmation.

Unless they are mistaken I gave them my btctalk username which shows me on the list of 30.  Will see what they say.

EDIT: They responded with the quote of $1900 per so it must have been a mistake.  

I just received a reply also from them and payment sent... I am glad to hear that the group buy is not cancelled.  

[Amph]

they are not responding to me, can you verify bittawm, i've sent the money more than 5 hours ago to this address 1JprpLKs5KhiGa79Ej1cynWM6h6VEjbQyS

[ANDYSK]

they are not responding to me, can you verify bittawm, i've sent the money more than 5 hours ago to this address 1JprpLKs5KhiGa79Ej1cynWM6h6VEjbQyS

Yes. The address is correct. I have sent to this address funds 2 days before and now have DHL traction no.
This BTC address belongs to Baikal. Be patient.

[Longsnowsm]

they are not responding to me, can you verify bittawm, i've sent the money more than 5 hours ago to this address 1JprpLKs5KhiGa79Ej1cynWM6h6VEjbQyS

Yes. The address is correct. I have sent to this address funds 2 days before and now have DHL traction no.
This BTC address belongs to Baikal. Be patient.

I concur this is the correct address that I also was sent.  So I think we just need to be patient as they sort through payments and order info. 

[scavern]

I am only getting funds on Friday so can only trade it on Monday. Baikal said they would try to keep my one. Here's hoping!

[LabaDaba]

Too much drama to buy miner. Should have just bought Quad or minis

[DebitMe]

Sent an email this morning, am on list, have not heard back yet.

[Docta]

hey... if someone drops out, i definitely want 1 to USA....  i can pay asap

thanks!

[ayoungtech]

This company is based in China. Be aware of that when waiting for responses. I've gotten emails from them around 3:00am my local time.

They responded to me saying that they would send a tracking number ~2 days after confirmed payment.

[felixbrucker]

This company is based in China. Be aware of that when waiting for responses. I've gotten emails from them around 3:00am my local time.

They responded to me saying that they would send a tracking number ~2 days after confirmed payment.

+1

everything worked out good for me, got my wanted 2 pcs, awaiting tracking number as well

in the past they delivered greatly for me (2 giants, 3 minis)

[M1n0r]

Yesterday I receve a mail and a skype saying me that they confirm the order and they will send me a track ID.
But this morning I receve another mail saying that they are not sure to send it for 1900$ due to hot sale on the group.  
I'm really dissapointed. I hope I will receve this Giant one day.

Edit: I contact them and all its ok there was a probleme of double mail.

[ANDYSK]

Yesterday I receve a mail and a skype saying me that they confirm the order and they will send me a track ID.
But this morning I receve another mail saying that they are not sure to send it for 1900$ due to hot sale on the group.  
I'm really dissapointed. I hope I will receve this Giant one day.

Edit: I contact them and all its ok there was a probleme of double mail.

Just paid for 7.

[bittawm]

Yesterday I receve a mail and a skype saying me that they confirm the order and they will send me a track ID.
But this morning I receve another mail saying that they are not sure to send it for 1900$ due to hot sale on the group.  
I'm really dissapointed. I hope I will receve this Giant one day.

Edit: I contact them and all its ok there was a probleme of double mail.

Just paid for 7.

awesome, cheers

[M1n0r]

Do you all have receve the ups tracking ? 
Because I receved only a mail confirmation.
I have paid 3 days ago now.

[lenart_o]

I got confirmation of payment ,
but also waiting for tracking number
I pay yesterday

[Amph]

same, they said to wait 3 business day, 1 passed

[M1n0r]

Ok thx for your answers.
Edit: I hope they will send it today.

[wlefever]

Waiting on tracking number as well.  Within 2 days of payment they will arrange shiment and provide tracking number according to their email. This evening will technically be day 2 from when they confirmed my payment because of different time zones.

EDIT: Received #, can't wait to have these set up!

[Longsnowsm]

I just received my tracking number from Baikal.  So you just have to be patient.  Baikal is working through the orders and will get them out to us.  If this is your first Giant I think you are going to like it.  It is a pretty nice miner. 

[M1n0r]

Its all good me too I receve the tracking.  
Edit: Its my first ASIC miner I start mining on graphic card. Some months ago.

[Rupucers]

Be calm. They also sent mine quad 2-3 days after payment.

[DebitMe]

I just received my tracking number from Baikal.  So you just have to be patient.  Baikal is working through the orders and will get them out to us.  If this is your first Giant I think you are going to like it.  It is a pretty nice miner. 

Whats the noise level of a miner?  I imagine it can't be very loud since it only used roughly 250 watts, but am curious.  Also, does each one take 2 8 pin connectors?  I will need to look for a PSU that has 6 8 pin connectors to power my 3 in that case.

[Amph]

I just received my tracking number from Baikal.  So you just have to be patient.  Baikal is working through the orders and will get them out to us.  If this is your first Giant I think you are going to like it.  It is a pretty nice miner. 

Whats the noise level of a miner?  I imagine it can't be very loud since it only used roughly 250 watts, but am curious.  Also, does each one take 2 8 pin connectors?  I will need to look for a PSU that has 6 8 pin connectors to power my 3 in that case.

some video on youtube say 50db other 70db

[Longsnowsm]

According to the sound meter on my phone it shows 64db at 3" from the fan, and about 44db at about 3 feet away from the miner.  It is not an annoying sound, it is a very nice home miner.  So far my favorite of the ASIC rigs I have played with or used.

[Amph]

According to the sound meter on my phone it shows 64db at 3" from the fan, and about 44db at about 3 feet away from the miner.  It is not an annoying sound, it is a very nice home miner.  So far my favorite of the ASIC rigs I have played with or used.

can you tell me if there is a switch, or you just plug it in the psu and it run?

[felixbrucker]

According to the sound meter on my phone it shows 64db at 3" from the fan, and about 44db at about 3 feet away from the miner.  It is not an annoying sound, it is a very nice home miner.  So far my favorite of the ASIC rigs I have played with or used.

can you tell me if there is a switch, or you just plug it in the psu and it run?

only pcie power plugs, no switch

[Longsnowsm]

According to the sound meter on my phone it shows 64db at 3" from the fan, and about 44db at about 3 feet away from the miner.  It is not an annoying sound, it is a very nice home miner.  So far my favorite of the ASIC rigs I have played with or used.

can you tell me if there is a switch, or you just plug it in the psu and it run?

only pcie power plugs, no switch

Felixbrucker is correct, there are no switches on the miner.  You can turn it on and off by the PSU power switch.  Not idea if you are trying to share the PSU with a GPU rig. 

[Amph]

According to the sound meter on my phone it shows 64db at 3" from the fan, and about 44db at about 3 feet away from the miner.  It is not an annoying sound, it is a very nice home miner.  So far my favorite of the ASIC rigs I have played with or used.

can you tell me if there is a switch, or you just plug it in the psu and it run?

only pcie power plugs, no switch

Felixbrucker is correct, there are no switches on the miner.  You can turn it on and off by the PSU power switch.  Not idea if you are trying to share the PSU with a GPU rig.  

yes this is the issue, if i turn the psu on the miner turn on but then i need to press the switch of the motherboard to turn that on also, which usually will turn on the psu...

normally the psu isn't working if you just turn on its switch but if the asic require the electricity it will switch it on like when you turn on the MB right?

[felixbrucker]

According to the sound meter on my phone it shows 64db at 3" from the fan, and about 44db at about 3 feet away from the miner.  It is not an annoying sound, it is a very nice home miner.  So far my favorite of the ASIC rigs I have played with or used.

can you tell me if there is a switch, or you just plug it in the psu and it run?

only pcie power plugs, no switch

Felixbrucker is correct, there are no switches on the miner.  You can turn it on and off by the PSU power switch.  Not idea if you are trying to share the PSU with a GPU rig. 

yes this is the issue, if i turn the psu on the miner turn on but then i need to press the switch of the motherboard to turn that on also, which usually will turn on the psu...

normally the psu isn't working if you just turn on its switch but if the asic require the electricity it will switch it on like you when you turn on the MB right?

i have had connected it like that, it wont work, your mb will have to connect the two pins form the 24 pin connector internally

[Amph]

According to the sound meter on my phone it shows 64db at 3" from the fan, and about 44db at about 3 feet away from the miner.  It is not an annoying sound, it is a very nice home miner.  So far my favorite of the ASIC rigs I have played with or used.

can you tell me if there is a switch, or you just plug it in the psu and it run?

only pcie power plugs, no switch

Felixbrucker is correct, there are no switches on the miner.  You can turn it on and off by the PSU power switch.  Not idea if you are trying to share the PSU with a GPU rig. 

yes this is the issue, if i turn the psu on the miner turn on but then i need to press the switch of the motherboard to turn that on also, which usually will turn on the psu...

normally the psu isn't working if you just turn on its switch but if the asic require the electricity it will switch it on like you when you turn on the MB right?

i have had connected it like that, it wont work, your mb will have to connect the two pins form the 24 pin connector internally

what do you mean? can i just switch on the motherboard first and plug the asic later into the psu?

[felixbrucker]

According to the sound meter on my phone it shows 64db at 3" from the fan, and about 44db at about 3 feet away from the miner.  It is not an annoying sound, it is a very nice home miner.  So far my favorite of the ASIC rigs I have played with or used.

can you tell me if there is a switch, or you just plug it in the psu and it run?

only pcie power plugs, no switch

Felixbrucker is correct, there are no switches on the miner.  You can turn it on and off by the PSU power switch.  Not idea if you are trying to share the PSU with a GPU rig. 

yes this is the issue, if i turn the psu on the miner turn on but then i need to press the switch of the motherboard to turn that on also, which usually will turn on the psu...

normally the psu isn't working if you just turn on its switch but if the asic require the electricity it will switch it on like you when you turn on the MB right?

i have had connected it like that, it wont work, your mb will have to connect the two pins form the 24 pin connector internally

what do you mean? can i just switch on the motherboard first and plug the asic later into the psu?

what i mean:
psu connected to mb and miner -> switch on the mb and the miner will turn on as well
psu connected to mb and miner -> switch on the psu and nothing will power on (besides when the mb auto powers on after it lost power)

[Amph]

According to the sound meter on my phone it shows 64db at 3" from the fan, and about 44db at about 3 feet away from the miner.  It is not an annoying sound, it is a very nice home miner.  So far my favorite of the ASIC rigs I have played with or used.

can you tell me if there is a switch, or you just plug it in the psu and it run?

only pcie power plugs, no switch

Felixbrucker is correct, there are no switches on the miner.  You can turn it on and off by the PSU power switch.  Not idea if you are trying to share the PSU with a GPU rig. 

yes this is the issue, if i turn the psu on the miner turn on but then i need to press the switch of the motherboard to turn that on also, which usually will turn on the psu...

normally the psu isn't working if you just turn on its switch but if the asic require the electricity it will switch it on like you when you turn on the MB right?

i have had connected it like that, it wont work, your mb will have to connect the two pins form the 24 pin connector internally

what do you mean? can i just switch on the motherboard first and plug the asic later into the psu?

what i mean:
psu connected to mb and miner -> switch on the mb and the miner will turn on as well
psu connected to mb and miner -> switch on the psu and nothing will power on (besides when the mb auto powers on after it lost power)

ah, then it work normally, i just plug in the psu and then turn on the MB, the psu is always on, i never shut down it completely

[Marvell1]

I anyone else drops out I am in for two shipping to USA

[ANDYSK]

Hi, anybody knows how to connect these miners and max how much pieces can be connected?? How to do it?? I found only 2 videos about preliminary settings. Nothing else on the web.
https://youtu.be/DjAOvdn7Pew
Waiting 7 pcs. Arriving on tuesday. Do you think I can connect all 7??

[Amph]

Hi, anybody knows how to connect these miners and max how much pieces can be connected?? How to do it?? I found only 2 videos about preliminary settings. Nothing else on the web.
https://youtu.be/DjAOvdn7Pew
Waiting 7 pcs. Arriving on tuesday. Do you think I can connect all 7??

buy a 1500watt psu connected them with pcie 8 pin and you're done

[ANDYSK]

Hi, anybody knows how to connect these miners and max how much pieces can be connected?? How to do it?? I found only 2 videos about preliminary settings. Nothing else on the web.
https://youtu.be/DjAOvdn7Pew
Waiting 7 pcs. Arriving on tuesday. Do you think I can connect all 7??

buy a 1500watt psu connected them with pcie 8 pin and you're done

I will have a server psu 2200w so no problem.
I would like to setup, configure and manage them at once not separately. Also do not want to use 7 LAN cables and 1 extra switch.

[Amph]

Hi, anybody knows how to connect these miners and max how much pieces can be connected?? How to do it?? I found only 2 videos about preliminary settings. Nothing else on the web.
https://youtu.be/DjAOvdn7Pew
Waiting 7 pcs. Arriving on tuesday. Do you think I can connect all 7??

buy a 1500watt psu connected them with pcie 8 pin and you're done

I will have a server psu 2200w so no problem.
I would like to setup, configure and manage them at once not separately. Also do not want to use 7 LAN cables and 1 extra switch.

well they must be connected in some way to the web, how can you do it without 7 cable? impossible

[Longsnowsm]

Hi, anybody knows how to connect these miners and max how much pieces can be connected?? How to do it?? I found only 2 videos about preliminary settings. Nothing else on the web.
https://youtu.be/DjAOvdn7Pew
Waiting 7 pcs. Arriving on tuesday. Do you think I can connect all 7??

buy a 1500watt psu connected them with pcie 8 pin and you're done

I will have a server psu 2200w so no problem.
I would like to setup, configure and manage them at once not separately. Also do not want to use 7 LAN cables and 1 extra switch.

well they must be connected in some way to the web, how can you do it without 7 cable? impossible

The Baikal miners can be connected in series and ran from one controller and one network connection.  However I don't know what the limit is on the number you can connect.  We know the minis can connect as a quad, so I would assume you can connect at least 4 of them together.

[wlefever]

What is everyones shipping time showing?  Over 2 weeks from China to Canada?

[ANDYSK]

4 days to Europe. To Slovakia.

[ayoungtech]

Hi, anybody knows how to connect these miners and max how much pieces can be connected?? How to do it?? I found only 2 videos about preliminary settings. Nothing else on the web.
https://youtu.be/DjAOvdn7Pew
Waiting 7 pcs. Arriving on tuesday. Do you think I can connect all 7??

I read in one of the previous groupbuy threads that you can connect 5 Giants together, but no more than 5.

[ANDYSK]

Thanks.
Can anybody help me with quick setup of baikal miner??
Would like to mine adzcoin, dash, quark, monetaryunit and startcoin.
Which pools do you prefer? Should I register to pools??
Is username my wallet adress and what is Extranonce??
Till now I was only in GPU mining.

[Rupucers]

I did mine adzcoin on minning pool hub. That was with rented gear after i mined other coin enough. Good pool.

[DebitMe]

Got my shipping notification today, tracking says it should arrive Tuesday to the US, so 3 business days.

Anyone have a link for the cable to connect these together?

[Amph]

Got my shipping notification today, tracking says it should arrive Tuesday to the US, so 3 business days.

Anyone have a link for the cable to connect these together?

https://www.youtube.com/watch?v=XqykCdIuMJI&t=197s

[baikal]

Hi, anybody knows how to connect these miners and max how much pieces can be connected?? How to do it?? I found only 2 videos about preliminary settings. Nothing else on the web.
https://youtu.be/DjAOvdn7Pew
Waiting 7 pcs. Arriving on tuesday. Do you think I can connect all 7??

https://www.youtube.com/watch?v=XqykCdIuMJI   ---Baikal Giant installation guide.

We recommend to connect no more 5 Giants together. 5 is OK and stable.

[baikal]

Hi all,

This topic you should read.

Recently, we have received some messages about the potential scams on skype, how to identify official baikal skype, please take a look at below topic:
https://bitcointalk.org/index.php?topic=1804508.0

Always be careful when you decide to do the payment. We are really grateful for all your trust on baikal and we do not want any baikal users be scamed by anyone. please help us let more people see it. Smiley

[Amph]

Hi, anybody knows how to connect these miners and max how much pieces can be connected?? How to do it?? I found only 2 videos about preliminary settings. Nothing else on the web.
https://youtu.be/DjAOvdn7Pew
Waiting 7 pcs. Arriving on tuesday. Do you think I can connect all 7??

https://www.youtube.com/watch?v=XqykCdIuMJI   ---Baikal Giant installation guide.

We recommend to connect no more 5 Giants together. 5 is OK and stable.

this article say to connect the pcie port that are up and not down https://www.eastshore.xyz/tutorial-baikal-giant-a900-x11-miner-900mh-217w-dash-miner/

what's the difference?

[scavern]

I did the payment earlier today... anxiously awaiting my tracking number!

Anyone else get their units and are mining already?

[ANDYSK]

My 7 giants has just arrived. But only with 6 sets of cable.
Wrrrrrrrrrr!!!!

[Longsnowsm]

My 7 giants has just arrived. But only with 6 sets of cable.
Wrrrrrrrrrr!!!!

Each miner should come with a pair of the cables.  One cable to connect one board to another in the same miner. The second cable is for the interconnect to a second or subsequent miners. So you should have excess cables to make all your connections.  Of course reach out to Baikal about the missing cables, but you should be able to get everything going.  

  

[Longsnowsm]

The new Giant showed up this evening.  Pulled it out of the box and attempted to connect 2 Giant's together.  For some reason the second miner would not sync up.  So I tried a couple of different things and still no luck getting them to sync.  So I disconnected the interlink between the 2 and connected a network cable and it was off and running without any issues. 

The software for this miner is just a cut above what you might have come to expect after working with Bitmain, Innosilicon, KNC.   The software has a very polished feel, it refreshes, it is interactive, it has a built in profit switching ability.  Just really nice stuff. 

I don't know why it didn't want to sync when interconnected between the two miners.  I might try again later to see if I can get that to work, but for now it is humming along.

One other observation about the Giant.  The chips just don't get hot.  My temps on these things running in my office are 34-35c right now.   I really don't expect any issues at all going into the summer with the Baikal miners. 

Also for those wanting to split the load on PSU's.  The miner comes with a PCIE Y cable so you can run the entire miner off of one PCIE drop on a PSU with the included splitter.  I currently have 2 Giant's mining X11 running off of a 550w PSU I had sitting around in a box and it is working fine.  You can't get much more efficient and cost effective than that. 

[scavern]

oooh built in profit switching?

can you post some screenshots of the UI showing this?

[wlefever]

oooh built in profit switching?

can you post some screenshots of the UI showing this?

Yes, I would like to know more about what you mean by this.  If mining on nicehash can it switch between algorithms  X11 / X13 / X14 / X15 / Quark / Qubit automatically based on profitability?

[Longsnowsm]

oooh built in profit switching?

can you post some screenshots of the UI showing this?

Yes, I would like to know more about what you mean by this.  If mining on nicehash can it switch between algorithms  X11 / X13 / X14 / X15 / Quark / Qubit automatically based on profitability?

That is my understanding that it works that way.  I could be wrong, but I thought I also read someplace here and on a Nicehash post online about this feature. 

I have had mine briefly switch between the algo's on Nicehash once or twice now since I have had it.  I don't know if it was due to Nicehash X11 briefly interrupted or if it was profit switching.  But hopefully more experienced people can chime in on this feature.  It could be I am misunderstanding what I read. Wouldn't be the first time.   

[alucard20724]

Here's the page to set it up for NiceHash

https://www.nicehash.com/index.jsp?p=news&id=114

and here's the page to set it up for MiningPoolHub

https://bitcointalk.org/index.php?topic=472510.msg16019833#msg16019833

I've had no problems with miningpoolhub, but when it auto switching on NiceHash, i ended up with extremely high reject percentages when it switched from x11 to qubit or quark.

so post your finding.

also, i'm just running the minis

[Amph]

can i connect the psu directly to the asic with a 2 x 8 pin?

[Longsnowsm]

can i connect the psu directly yo the asic with a 2 x 8 pin?

Yes, that is how I had mine setup until I started using the splitters last night to run two miners from one PSU.  You can connect the 8 pin connectors to the miner directly.

[Amph]

can i connect the psu directly yo the asic with a 2 x 8 pin?

Yes, that is how I had mine setup until I started using the splitters last night to run two miners from one PSU.  You can connect the 8 pin connectors to the miner directly.

i connected it but the light went out...i hope it's not faulty i connected directly the 2 8 pin to the above 8 pin slot

well it doesn't work anymore wasted money...it was indeed faulty, i connected everything correctly, but when i switched off the psu it cut off the power

[Quakenet]

I just baught 10 Giants from Baikal and i must say their customer service is really nice. You feel taken care off and everything went smooth from start to finish. I asked alot of question and they replied really fast in an orderly fashion. Now im just waiting for shipping parcel information.

Keep up the good work you guys at Baikal. I will be ordering alot more from you in the near future

Best Regards Happy Hashing co in Norway

[Longsnowsm]

can i connect the psu directly yo the asic with a 2 x 8 pin?

Yes, that is how I had mine setup until I started using the splitters last night to run two miners from one PSU.  You can connect the 8 pin connectors to the miner directly.

i connected it but the light went out...i hope it's not faulty i connected directly the 2 8 pin to the above 8 pin slot

well it doesn't work anymore wasted money...it was indeed faulty, i connected everything correctly, but when i switched off the psu it cut off the power

Are you using a stand alone PSU or one that is in another rig?  If you are using a stand alone PSU did you remember to jumper the mobo connector pins so that the PSU will run stand alone?  Other than that all I can recommend is to double check all your connectors. 

1. The USB from the controller to the first board. 
2. The Serial cable from one board to the other. 
3. 1 PCIE power connection to each board. 
4. Make sure to plug in the power cord into the orange pi. 

When you first power it on you should see flashing lights on both of the boards while everything passes the POST checks and then start to bring the boards online.  This takes a couple of minutes to complete.  Once they are sync'd and hashing the lights on both boards with stay turned on solid.  You should also see a red light on the orange pi controller, and of course link and data lights on your network interface. 

Those are my checklist items I can offer.  If those don't work then reach out to Baikal and I am sure they will get you fixed up.

   

[Amph]

can i connect the psu directly yo the asic with a 2 x 8 pin?

Yes, that is how I had mine setup until I started using the splitters last night to run two miners from one PSU.  You can connect the 8 pin connectors to the miner directly.

i connected it but the light went out...i hope it's not faulty i connected directly the 2 8 pin to the above 8 pin slot

well it doesn't work anymore wasted money...it was indeed faulty, i connected everything correctly, but when i switched off the psu it cut off the power

Are you using a stand alone PSU or one that is in another rig?  If you are using a stand alone PSU did you remember to jumper the mobo connector pins so that the PSU will run stand alone?  Other than that all I can recommend is to double check all your connectors.  

1. The USB from the controller to the first board.  
2. The Serial cable from one board to the other.  
3. 1 PCIE power connection to each board.  
4. Make sure to plug in the power cord into the orange pi.  

When you first power it on you should see flashing lights on both of the boards while everything passes the POST checks and then start to bring the boards online.  This takes a couple of minutes to complete.  Once they are sync'd and hashing the lights on both boards with stay turned on solid.  You should also see a red light on the orange pi controller, and of course link and data lights on your network interface.  

Those are my checklist items I can offer.  If those don't work then reach out to Baikal and I am sure they will get you fixed up.

  

stand alone connected only to the miner and the electric socket, why i need to jump the mobo? the psu is not connected to the mobo

i followed the video, connected correctly the usb, the serial cable and everything, then i connected the 2x8 pin from the psu directly to the 2x8 slot in the miner, is this correct?

because they send you the yellow splitter which has only one 6 x pin female and two per 6 pin to connect to the miner

i followed this https://www.youtube.com/watch?v=XqykCdIuMJI&t=197s, but instead of the yellow cable with 6x2pin, i plugged directly the psu pcie cable into the miner, maybe this is wrong? but i can't think of why it should be

[M1n0r]

Hello
I receved my miner this morning and directly mine Dash after check what to mine.
But what is the best dash pool that you recommend ? I start with super nova.
The giant look good easy to plug after watching the video. I was surprised that the noise is not so loud.

[lenart_o]

My 7 giants has just arrived. But only with 6 sets of cable.
Wrrrrrrrrrr!!!!

I got my miners today
You are lucky guy
I got 5 with 1 set of cable
now I wainting for response from Baikal

[Longsnowsm]

can i connect the psu directly yo the asic with a 2 x 8 pin?

Yes, that is how I had mine setup until I started using the splitters last night to run two miners from one PSU.  You can connect the 8 pin connectors to the miner directly.

i connected it but the light went out...i hope it's not faulty i connected directly the 2 8 pin to the above 8 pin slot

well it doesn't work anymore wasted money...it was indeed faulty, i connected everything correctly, but when i switched off the psu it cut off the power

Are you using a stand alone PSU or one that is in another rig?  If you are using a stand alone PSU did you remember to jumper the mobo connector pins so that the PSU will run stand alone?  Other than that all I can recommend is to double check all your connectors.  

1. The USB from the controller to the first board.  
2. The Serial cable from one board to the other.  
3. 1 PCIE power connection to each board.  
4. Make sure to plug in the power cord into the orange pi.  

When you first power it on you should see flashing lights on both of the boards while everything passes the POST checks and then start to bring the boards online.  This takes a couple of minutes to complete.  Once they are sync'd and hashing the lights on both boards with stay turned on solid.  You should also see a red light on the orange pi controller, and of course link and data lights on your network interface.  

Those are my checklist items I can offer.  If those don't work then reach out to Baikal and I am sure they will get you fixed up.

  

stand alone connected only to the miner and the electric socket, why i need to jump the mobo? the psu is not connected to the mobo

i followed the video, connected correctly the usb, the serial cable and everything, then i connected the 2x8 pin from the psu directly to the 2x8 slot in the miner, is this correct?

because they send you the yellow splitter which has only one 6 x pin female and two per 6 pin to connect to the miner

i followed this https://www.youtube.com/watch?v=XqykCdIuMJI&t=197s, but instead of the yellow cable with 6x2pin, i plugged directly the psu pcie cable into the miner, maybe this is wrong? but i can't think of why it should be

Unless you have a PSU that can run without the motherboard connected you need to plug in the mobo cable and jumper 2 of the pins to fool the PSU into thinking it is connected to a mobo. Otherwise it will not power up.  

[Amph]

can i connect the psu directly yo the asic with a 2 x 8 pin?

Yes, that is how I had mine setup until I started using the splitters last night to run two miners from one PSU.  You can connect the 8 pin connectors to the miner directly.

i connected it but the light went out...i hope it's not faulty i connected directly the 2 8 pin to the above 8 pin slot

well it doesn't work anymore wasted money...it was indeed faulty, i connected everything correctly, but when i switched off the psu it cut off the power

Are you using a stand alone PSU or one that is in another rig?  If you are using a stand alone PSU did you remember to jumper the mobo connector pins so that the PSU will run stand alone?  Other than that all I can recommend is to double check all your connectors.  

1. The USB from the controller to the first board.  
2. The Serial cable from one board to the other.  
3. 1 PCIE power connection to each board.  
4. Make sure to plug in the power cord into the orange pi.  

When you first power it on you should see flashing lights on both of the boards while everything passes the POST checks and then start to bring the boards online.  This takes a couple of minutes to complete.  Once they are sync'd and hashing the lights on both boards with stay turned on solid.  You should also see a red light on the orange pi controller, and of course link and data lights on your network interface.  

Those are my checklist items I can offer.  If those don't work then reach out to Baikal and I am sure they will get you fixed up.

  

stand alone connected only to the miner and the electric socket, why i need to jump the mobo? the psu is not connected to the mobo

i followed the video, connected correctly the usb, the serial cable and everything, then i connected the 2x8 pin from the psu directly to the 2x8 slot in the miner, is this correct?

because they send you the yellow splitter which has only one 6 x pin female and two per 6 pin to connect to the miner

i followed this https://www.youtube.com/watch?v=XqykCdIuMJI&t=197s, but instead of the yellow cable with 6x2pin, i plugged directly the psu pcie cable into the miner, maybe this is wrong? but i can't think of why it should be

Unless you have a PSU that can run without the motherboard connected you need to plug in the mobo cable and jumper 2 of the pins to fool the PSU into thinking it is connected to a mobo. Otherwise it will not power up.  

what are the psu that can run without a mobo?

[Longsnowsm]

can i connect the psu directly yo the asic with a 2 x 8 pin?

Yes, that is how I had mine setup until I started using the splitters last night to run two miners from one PSU.  You can connect the 8 pin connectors to the miner directly.

i connected it but the light went out...i hope it's not faulty i connected directly the 2 8 pin to the above 8 pin slot

well it doesn't work anymore wasted money...it was indeed faulty, i connected everything correctly, but when i switched off the psu it cut off the power

Are you using a stand alone PSU or one that is in another rig?  If you are using a stand alone PSU did you remember to jumper the mobo connector pins so that the PSU will run stand alone?  Other than that all I can recommend is to double check all your connectors.  

1. The USB from the controller to the first board.  
2. The Serial cable from one board to the other.  
3. 1 PCIE power connection to each board.  
4. Make sure to plug in the power cord into the orange pi.  

When you first power it on you should see flashing lights on both of the boards while everything passes the POST checks and then start to bring the boards online.  This takes a couple of minutes to complete.  Once they are sync'd and hashing the lights on both boards with stay turned on solid.  You should also see a red light on the orange pi controller, and of course link and data lights on your network interface.  

Those are my checklist items I can offer.  If those don't work then reach out to Baikal and I am sure they will get you fixed up.

  

stand alone connected only to the miner and the electric socket, why i need to jump the mobo? the psu is not connected to the mobo

i followed the video, connected correctly the usb, the serial cable and everything, then i connected the 2x8 pin from the psu directly to the 2x8 slot in the miner, is this correct?

because they send you the yellow splitter which has only one 6 x pin female and two per 6 pin to connect to the miner

i followed this https://www.youtube.com/watch?v=XqykCdIuMJI&t=197s, but instead of the yellow cable with 6x2pin, i plugged directly the psu pcie cable into the miner, maybe this is wrong? but i can't think of why it should be

Unless you have a PSU that can run without the motherboard connected you need to plug in the mobo cable and jumper 2 of the pins to fool the PSU into thinking it is connected to a mobo. Otherwise it will not power up.  

what are the psu that can run without a mobo?

That I don't know.  I have seen references to including "diagnostic" plugs to jumper the PSU at the plug instead of connecting the mobo cable.  I have seen some references to a swtich on some PSU's.  However all of my PSU's all require me to jumper the mobo cable to trick the PSU.  Once you do that it will then allow you to power it up. 

[Longsnowsm]

Here is the paperclip trick.  It is pretty simple, and you don't need to go crazy taping it up like this guy did.  Your simply closing the circuit so that the PSU thinks the mobo is connected.

http://aphnetworks.com/tutorials/psu_paperclip_trick

[bittawm]

Here is the paperclip trick.  It is pretty simple, and you don't need to go crazy taping it up like this guy did.  Your simply closing the circuit so that the PSU thinks the mobo is connected.

http://aphnetworks.com/tutorials/psu_paperclip_trick

you can also buy jumpers for PSU theyre cheap

[Longsnowsm]

Here is the paperclip trick.  It is pretty simple, and you don't need to go crazy taping it up like this guy did.  Your simply closing the circuit so that the PSU thinks the mobo is connected.

http://aphnetworks.com/tutorials/psu_paperclip_trick

you can also buy jumpers for PSU theyre cheap

  True, just not as cheap as a paperclip! LOL

[bittawm]

Here is the paperclip trick.  It is pretty simple, and you don't need to go crazy taping it up like this guy did.  Your simply closing the circuit so that the PSU thinks the mobo is connected.

http://aphnetworks.com/tutorials/psu_paperclip_trick

you can also buy jumpers for PSU theyre cheap

  True, just not as cheap as a paperclip! LOL

lol too true... all about the ROI

[Amph]

ok everything work good, but in the configuration it let not save the pool

[Longsnowsm]

ok everything work good, but in the configuration it let not save the pool

That is great news!  Glad you were able to get it working. 

The pool configuration screen is a little confusing at first.  They have a BUNCH of pre-made pools in there so you can switch them rapidly and can save the config as a backup.  But once you play around in there you will get the hang of it pretty quick.

Remove the ones you don't want, and to add the ones you do want.  With the preconfigured pools you click on the section on the left for the groups of preconfigured pools and they will show up in the list on the right.  You just plug in your own id/pass combo which makes it very fast and easy to do.  And you set the priority in which you want to use them.

[Amph]

ok everything work good, but in the configuration it let not save the pool

That is great news!  Glad you were able to get it working.  

The pool configuration screen is a little confusing at first.  They have a BUNCH of pre-made pools in there so you can switch them rapidly and can save the config as a backup.  But once you play around in there you will get the hang of it pretty quick.

Remove the ones you don't want, and to add the ones you do want.  With the preconfigured pools you click on the section on the left for the groups of preconfigured pools and they will show up in the list on the right.  You just plug in your own id/pass combo which makes it very fast and easy to do.  And you set the priority in which you want to use them.

yeah i deleted everything and re-added mine now it look more clean

too bad there is no solo mining with this, can come in handy with new coin, i'm talking with baikal for this, they said that perhaps there is a way

[Longsnowsm]

@Amph  I am glad you got it all sorted out.  I think you will like this miner.  So far it works pretty well.  A solo option would be nice for ICO's etc. Keep us posted on what comes from that conversation with Baikal.

The management software is pretty good for an ASIC miner.  If you ever get a chance to look at some of the other ASIC's out there you might be shocked at how bad they are.  There are only a few things that come to mind that I would like to see added or changed in the Baikal interface so far. 

 

[Amph]

yeah it's very easy to use and very fast, it update almost instantly for me

btw my temp are 45° what are the maximum temp allowed? now that summer is coming again, i want to be sure that i'm far away from the limit

[M1n0r]

I am interresed to know guys what do you mine ? And what pool are you using ?

[toptek]

how does a group buy work i have 1100 $$ ( don't tel me to buy bitcoins i love the thrill of mining or the high i get doing it )  to spend i was going to buy a A4 but this is looking better and better all the time with dash @ 32.33  bucks a pop and going up ? ... also right now this is just a hobby i want to pay for it self over time ..

[M1n0r]

how does a group buy work i have 1100 $$ ( don't tel me to buy bitcoins i love the thrill of mining or the high i get doing it )  to spend i was going to buy a A4 but this is looking better and better all the time with dash @ 32.33  bucks a pop and going up ? ... also right now this is just a hobby i want to pay for it self over time ..

I am new in mining I start like 4 mounts a go on graphic card.
I just saw the group buy and asked to buy one.
But it was a limited offer.
Maybe Bitawn gone make it other offer.
Or u can try to make ure own group buy.
By asking directly to baikal for group buy offert.

[kcheel]

I am interresed to know guys what do you mine ? And what pool are you using ?

Mostly just set mine to Nicehash lately.  If not there, mining ADZ usually on Mining Pool Hub.

[toptek]

how does a group buy work i have 1100 $$ ( don't tel me to buy bitcoins i love the thrill of mining or the high i get doing it )  to spend i was going to buy a A4 but this is looking better and better all the time with dash @ 32.33  bucks a pop and going up ? ... also right now this is just a hobby i want to pay for it self over time ..

I am new in mining I start like 4 mounts a go on graphic card.
I just saw the group buy and asked to buy one.
But it was a limited offer.
Maybe Bitawn gone make it other offer.
Or u can try to make ure own group buy.
By asking directly to baikal for group buy offert.

ok thanks i missed it , IM gonna hit ebay or Amazon then see whats there ..I have found deals on both those sites no one here could beat, not all ways but every now then it happens ..

[M1n0r]

I am interresed to know guys what do you mine ? And what pool are you using ?

Mostly just set mine to Nicehash lately.  If not there, mining ADZ usually on Mining Pool Hub.

Yes I esitated to mine on nicehash.
But I wanted to try Dash and he was the most profitable.
I saw ADZ but dont try it at the moment.
I was thinking if u can configure an auto switch profitability between Nicehash, Adz and Dash.
Its possible to do this rigth?

[igotek]

I want to learn the voice.

Compare Antminer S7 vs Baikal A900 Giant.

[charles2k]

So delivery was fast, but one miner was dirty (it seems as aprox. 1 month used).
And after one day I had to reset it, because one hashboard was dead (after reset ok, but it is strange)

http://imgur.com/a/yRZJc

[bittawm]

stay tuned for more exciting news, this is not the last promotion

[DebitMe]

Got my 3 today, just set the first one up and it is off running like a champ!  So very happy with these units!

Quick question though.  I have it running to Nicehash and want to it auto switch to the most profitable coin, do I need to do anything besides load the 5 different URL's, one for each algorithm, into the pools page?

[Longsnowsm]

Got my 3 today, just set the first one up and it is off running like a champ!  So very happy with these units!

Quick question though.  I have it running to Nicehash and want to it auto switch to the most profitable coin, do I need to do anything besides load the 5 different URL's, one for each algorithm, into the pools page?

Here is the instruction page from Nicehash:
https://www.nicehash.com/index.jsp?p=news&id=114

Basically on the miner page add an sgminer option to enable the switching. 

[Longsnowsm]

stay tuned for more exciting news, this is not the last promotion

That is good news.  I hope you give us a little time to earn some money so we can buy more in the next round!   

[miropp]

stay tuned for more exciting news, this is not the last promotion

When you expect this new promotion? It will be again for Giants?

[bittawm]

stay tuned for more exciting news, this is not the last promotion

When you expect this new promotion? It will be again for Giants?

mums the word

[DebitMe]

Got my 3 today, just set the first one up and it is off running like a champ!  So very happy with these units!

Quick question though.  I have it running to Nicehash and want to it auto switch to the most profitable coin, do I need to do anything besides load the 5 different URL's, one for each algorithm, into the pools page?

Here is the instruction page from Nicehash:
https://www.nicehash.com/index.jsp?p=news&id=114

Basically on the miner page add an sgminer option to enable the switching. 

Awesome, thank you!

[Longsnowsm]

stay tuned for more exciting news, this is not the last promotion

When you expect this new promotion? It will be again for Giants?

mums the word

You can tell us, we won't tell a soul... We promise 

[M1n0r]

Got my 3 today, just set the first one up and it is off running like a champ!  So very happy with these units!

Quick question though.  I have it running to Nicehash and want to it auto switch to the most profitable coin, do I need to do anything besides load the 5 different URL's, one for each algorithm, into the pools page?

Here is the instruction page from Nicehash:
https://www.nicehash.com/index.jsp?p=news&id=114

Basically on the miner page add an sgminer option to enable the switching. 

Awesome, thank you!

Yes thanks that was my question. But my english is bad. 

[LabaDaba]

how loud are Giants compered to other miners?

[pjcltd]

how loud are Giants compered to other miners?

Hi
i got mine yesterday and i must say im impressed  with the build and the sound level
i have a look on youtube like most of you will have done
the sound level is a lot less  no more than 2 quads

I added mine to https://muefarm.mp-hosting.co.uk/ we now have  10gigs of power and more on the way



thanks
Paul

[felixbrucker]

yeah it's very easy to use and very fast, it update almost instantly for me

btw my temp are 45° what are the maximum temp allowed? now that summer is coming again, i want to be sure that i'm far away from the limit

wanting to know as well, anyone?

[felixbrucker]

miner just arrived, unfortunately all cables are missing for both giants, meh

now waiting for baikal to read their skype and send some

[DebitMe]

Btw, these things are extremely durable.  My cat knocked over a tower of 3 of them from off of about a 1.5 foot high shelf and they worked for the rest of the day until I got home and found them.

[MatBott]

Someone paid the additional tax charge for customs clearance in Europe?

[Amph]

Someone paid the additional tax charge for customs clearance in Europe?

yeah 50 euro, they need to declare $45 as a value not $97...

[bittawm]

Btw, these things are extremely durable.  My cat knocked over a tower of 3 of them from off of about a 1.5 foot high shelf and they worked for the rest of the day until I got home and found them.

made me lol

[Truthchanter]

I just got my miner and plugged everything in correctly. I've had it turned on and it's still flashing the colors after 10mins, and it doesn't seem to be using the ethernet connection (I can see that the light isn't on for that port on the ethernet switch)? Any ideas whats wrong?

[Longsnowsm]

I just got my miner and plugged everything in correctly. I've had it turned on and it's still flashing the colors after 10mins, and it doesn't seem to be using the ethernet connection (I can see that the light isn't on for that port on the ethernet switch)? Any ideas whats wrong?

Usually it is going to be a connection someplace.

I would check your network cable, even try swapping it.

Do you see a red light that is illuminated on the orange pi? 
If not then double check the power connection to the controller board is firmly seated in the power plug.

Then double check your USB plug/cable to the first controller board connection.

Lastly check the cross connect serial cables.

These would be the places I would check.  It is usually something simple. 

[Truthchanter]

I just got my miner and plugged everything in correctly. I've had it turned on and it's still flashing the colors after 10mins, and it doesn't seem to be using the ethernet connection (I can see that the light isn't on for that port on the ethernet switch)? Any ideas whats wrong?

Usually it is going to be a connection someplace.

I would check your network cable, even try swapping it.

Do you see a red light that is illuminated on the orange pi?  
If not then double check the power connection to the controller board is firmly seated in the power plug.

Then double check your USB plug/cable to the first controller board connection.

Lastly check the cross connect serial cables.

These would be the places I would check.  It is usually something simple.  

Thanks, there is not a red light on the orange pi, however the ethernet port lights on the orange pi light up. the orange pi power cord seems as  securely fit as possible.. Seems mine is DOA :/

[Longsnowsm]

If you don't have a red light illuminated on the to of the pi then you may have a bad pi.  I will have to defer to Baikal on this one as they may know some tricks I don't on diagnosing this further. 

[pjcltd]

I just got my miner and plugged everything in correctly. I've had it turned on and it's still flashing the colors after 10mins, and it doesn't seem to be using the ethernet connection (I can see that the light isn't on for that port on the ethernet switch)? Any ideas whats wrong?

Usually it is going to be a connection someplace.

I would check your network cable, even try swapping it.

Do you see a red light that is illuminated on the orange pi?  
If not then double check the power connection to the controller board is firmly seated in the power plug.

Then double check your USB plug/cable to the first controller board connection.

Lastly check the cross connect serial cables.

These would be the places I would check.  It is usually something simple.  

Thanks, there is not a red light on the orange pi, however the ethernet port lights on the orange pi light up. the orange pi power cord seems as  securely fit as possible.. Seems mine is DOA :/

to check if the PI is bad
plug the HDMI output into a monitor
if you get a load of CPU errors  then it might just need a flash of the micro SD card 
i did have that issue on a few minis

if you are in the uk i have spare Orange PIs that i got from them if you pay the postage il send you one

thanks
Paul

[Truthchanter]

I just got my miner and plugged everything in correctly. I've had it turned on and it's still flashing the colors after 10mins, and it doesn't seem to be using the ethernet connection (I can see that the light isn't on for that port on the ethernet switch)? Any ideas whats wrong?

Usually it is going to be a connection someplace.

I would check your network cable, even try swapping it.

Do you see a red light that is illuminated on the orange pi?  
If not then double check the power connection to the controller board is firmly seated in the power plug.

Then double check your USB plug/cable to the first controller board connection.

Lastly check the cross connect serial cables.

These would be the places I would check.  It is usually something simple.  

Thanks, there is not a red light on the orange pi, however the ethernet port lights on the orange pi light up. the orange pi power cord seems as  securely fit as possible.. Seems mine is DOA :/

to check if the PI is bad
plug the HDMI output into a monitor
if you get a load of CPU errors  then it might just need a flash of the micro SD card 
i did have that issue on a few minis

if you are in the uk i have spare Orange PIs that i got from them if you pay the postage il send you one

thanks
Paul

I don't get any video output when I plug the orange pi hdmi out into my monitor

[felixbrucker]

miner just arrived, unfortunately all cables are missing for both giants, meh

now waiting for baikal to read their skype and send some

update: will get them the following days

[pjcltd]

I just got my miner and plugged everything in correctly. I've had it turned on and it's still flashing the colors after 10mins, and it doesn't seem to be using the ethernet connection (I can see that the light isn't on for that port on the ethernet switch)? Any ideas whats wrong?

Usually it is going to be a connection someplace.

I would check your network cable, even try swapping it.

Do you see a red light that is illuminated on the orange pi?  
If not then double check the power connection to the controller board is firmly seated in the power plug.

Then double check your USB plug/cable to the first controller board connection.

Lastly check the cross connect serial cables.

These would be the places I would check.  It is usually something simple.  

Thanks, there is not a red light on the orange pi, however the ethernet port lights on the orange pi light up. the orange pi power cord seems as  securely fit as possible.. Seems mine is DOA :/

to check if the PI is bad
plug the HDMI output into a monitor
if you get a load of CPU errors  then it might just need a flash of the micro SD card 
i did have that issue on a few minis

if you are in the uk i have spare Orange PIs that i got from them if you pay the postage il send you one

thanks
Paul

I don't get any video output when I plug the orange pi hdmi out into my monitor

then is a DEAD Pi
where are you

thanks
Paul

[Truthchanter]

I just got my miner and plugged everything in correctly. I've had it turned on and it's still flashing the colors after 10mins, and it doesn't seem to be using the ethernet connection (I can see that the light isn't on for that port on the ethernet switch)? Any ideas whats wrong?

Usually it is going to be a connection someplace.

I would check your network cable, even try swapping it.

Do you see a red light that is illuminated on the orange pi?  
If not then double check the power connection to the controller board is firmly seated in the power plug.

Then double check your USB plug/cable to the first controller board connection.

Lastly check the cross connect serial cables.

These would be the places I would check.  It is usually something simple.  

Thanks, there is not a red light on the orange pi, however the ethernet port lights on the orange pi light up. the orange pi power cord seems as  securely fit as possible.. Seems mine is DOA :/

to check if the PI is bad
plug the HDMI output into a monitor
if you get a load of CPU errors  then it might just need a flash of the micro SD card 
i did have that issue on a few minis

if you are in the uk i have spare Orange PIs that i got from them if you pay the postage il send you one

thanks
Paul

I don't get any video output when I plug the orange pi hdmi out into my monitor

then is a DEAD Pi
where are you

thanks
Paul

I got everything working! It turned out my orange pi didn't come with a micro SD card in it. I went out and bought one and followed the Baikal guide on how to install the right files on it and then i plugged it into the orange pi and everything is well. Thanks though

[pjcltd]

I just got my miner and plugged everything in correctly. I've had it turned on and it's still flashing the colors after 10mins, and it doesn't seem to be using the ethernet connection (I can see that the light isn't on for that port on the ethernet switch)? Any ideas whats wrong?

Usually it is going to be a connection someplace.

I would check your network cable, even try swapping it.

Do you see a red light that is illuminated on the orange pi?  
If not then double check the power connection to the controller board is firmly seated in the power plug.

Then double check your USB plug/cable to the first controller board connection.

Lastly check the cross connect serial cables.

These would be the places I would check.  It is usually something simple.  

Thanks, there is not a red light on the orange pi, however the ethernet port lights on the orange pi light up. the orange pi power cord seems as  securely fit as possible.. Seems mine is DOA :/

to check if the PI is bad
plug the HDMI output into a monitor
if you get a load of CPU errors  then it might just need a flash of the micro SD card 
i did have that issue on a few minis

if you are in the uk i have spare Orange PIs that i got from them if you pay the postage il send you one

thanks
Paul

I don't get any video output when I plug the orange pi hdmi out into my monitor

then is a DEAD Pi
where are you

thanks
Paul

I got everything working! It turned out my orange pi didn't come with a micro SD card in it. I went out and bought one and followed the Baikal guide on how to install the right files on it and then i plugged it into the orange pi and everything is well. Thanks though

good news

happy mining


thanks
Paul

[felixbrucker]

yeah it's very easy to use and very fast, it update almost instantly for me

btw my temp are 45° what are the maximum temp allowed? now that summer is coming again, i want to be sure that i'm far away from the limit

wanting to know as well, anyone?

as apprently no one knows i have asked baikal:

Regaridng of temmperature
can work good under 72 degrees, once miner is in over-degrees, it will stop hashing automatically. when temperature back to under 72 degrees, miner start automatically, back in hashing/

[Amph]

yeah it's very easy to use and very fast, it update almost instantly for me

btw my temp are 45° what are the maximum temp allowed? now that summer is coming again, i want to be sure that i'm far away from the limit

wanting to know as well, anyone?

as apprently no one knows i have asked baikal:

Regaridng of temmperature
can work good under 72 degrees, once miner is in over-degrees, it will stop hashing automatically. when temperature back to under 72 degrees, miner start automatically, back in hashing/

this miner is really at the forefront, beautiful tech, just a bit too loud for my taste...

[xxkaiwaxx]

Add me to the next GROUP BUY please!!

[Searing]

Add me to the next GROUP BUY please!!

Unaware of any. Ditto for me to thou.

At least would like to be informed of when/if another group buy comes to pass

[bittawm]

Add me to the next GROUP BUY please!!

Unaware of any. Ditto for me to thou.

At least would like to be informed of when/if another group buy comes to pass

you will all be informed trust me

[igotek]

I have one baikal mini miner. It works very well. I paid 500 USD before price is down. Now group buy is a good option for me. I will buy one a900 giant.

[Quakenet]

My 10 Giants arrived today. Will get them up and running as fast as possible and try to get some photos up here on the forum of them.

[percy_tc]

I'm also up for one Giant.

[scavern]

Can someone help me get my giant working?

All the connections appear to be correct, but it won't power on.

[Longsnowsm]

Can someone help me get my giant working?

All the connections appear to be correct, but it won't power on.

If it is a stand alone PSU have you jumpered the mobo cable to trick the PSU to running without being connected to a PC?

[bittawm]

all products are limited at the moment, demand is off the scale

[Amph]

all products are limited at the moment, demand is off the scale

i'm curious, how many giant units can be produced per month?

i see some times that the diff jump very high and then return normal, it's like they are testing stuff out there...

[scavern]

Can someone help me get my giant working?

All the connections appear to be correct, but it won't power on.

If it is a stand alone PSU have you jumpered the mobo cable to trick the PSU to running without being connected to a PC?

Thanks, I realised that and jumpered it

My new problem is that it can't seem to mine to x11 nicehash... works on miningpoolhub though.

[MakeMyDay619]

Hello, Im new on this forum, looking for an opportunity to buy

If you open another groupbuy, put me on the list pls, I'll take 2x Giant A900 for 1900$ or less

Or Equal amount of quads ofc...

Many thanks!

[Rupucers]

Let's hope for more Mini/quads groupbuy. Or new miners keep up good work Baikal.

[wlefever]

miner just arrived, unfortunately all cables are missing for both giants, meh

now waiting for baikal to read their skype and send some

Missing all cables as well. Grrr waited for two weeks to have these delivered too and now gonna be another week at least to get the accessories.

[Quakenet]

miner just arrived, unfortunately all cables are missing for both giants, meh

now waiting for baikal to read their skype and send some

Missing all cables as well. Grrr waited for two weeks to have these delivered too and now gonna be another week at least to get the accessories.

Thats wierd that i hear people are missing cables when recieving orders from baikal. I ordered 10 gaints and got 5 sets of extra cables and 2 extra rasperries in my order. Must be miss packaging on their part??

[wlefever]

miner just arrived, unfortunately all cables are missing for both giants, meh

now waiting for baikal to read their skype and send some

Missing all cables as well. Grrr waited for two weeks to have these delivered too and now gonna be another week at least to get the accessories.

Thats wierd that i hear people are missing cables when recieving orders from baikal. I ordered 10 gaints and got 5 sets of extra cables and 2 extra rasperries in my order. Must be miss packaging on their part??

Guess so. I've got 3 miners at my hosting that can't connect without the 1 usb, 2 data and 1 power splitter that should have come with each miner.

[Quakenet]

My 10 Giants running like kittens no problem setting them up. Just like building legos...

http://tinypic.com/view.php?pic=2njvapz&s=9#.WL7zTfIWZSA

Been running for 5 Hours and temps are stable at 29C

[MrN4body]

im you plan on doing a groupbuy agian please write me, i'd also be up for a mini miner/quardouple ! thanks <3

[igotek]

My 10 Giants running like kittens no problem setting them up. Just like building legos...

http://tinypic.com/view.php?pic=2njvapz&s=9#.WL7zTfIWZSA

Been running for 5 Hours and temps are stable at 29C

it s really nice set up. if i find a solution to get them, i will buy 100 pcs giant. i made a private room for them. everything is ready. But i have to find avoid the customs. The customs is a big problem.

[felixbrucker]

My 10 Giants running like kittens no problem setting them up. Just like building legos...

http://tinypic.com/view.php?pic=2njvapz&s=9#.WL7zTfIWZSA

Been running for 5 Hours and temps are stable at 29C

it s really nice set up. if i find a solution to get them, i will buy 100 pcs giant. i made a private room for them. everything is ready. But i have to find avoid the customs. The customs is a big problem.

100, holy

supply might be a problem as well for such large orders

[igotek]

the baikal miners are stable and perfect. i have money to buy. But i dont have information about the customs. The customs in our country is so strange. i wish the baikal sells their miners in our country.

[Quakenet]

the baikal miners are stable and perfect. i have money to buy. But i dont have information about the customs. The customs in our country is so strange. i wish the baikal sells their miners in our country.

Baikal declared each unit cost 94$ so i payed 94$ customs for each unit. In my country i have to pay 25% of the total sum of purchase order so baikal helped me alot in clearing customs i would have been ALLLLOT more. Thanks Baikal

[Quakenet]

the baikal miners are stable and perfect. i have money to buy. But i dont have information about the customs. The customs in our country is so strange. i wish the baikal sells their miners in our country.

Baikal declared each unit cost 94$ so i payed 94$ customs for each unit. In my country i have to pay 25% of the total sum of purchase order so baikal helped me alot in clearing customs i would have been ALLLLOT more. Thanks Baikal

holy moly remind me not to post on this forum while drunked!!!

[KougarLOB]

Got a Giant and another Mini.  Mini was paired with another to make a Dual  .  Giant and Minis are easy and Pi to setup.

Question about the Giant's user interface:  I see the Extranonce check box on the Miner page.  It is selected ("Yes" is checked) but Nicehash is saying that it is not and "mining performance is degraded."  Is this true?  I tried to toggle the check box but it doesn't change the Nicehash page.  Should I ignore this?

[TunerDude007]

My 10 Giants running like kittens no problem setting them up. Just like building legos...

http://tinypic.com/view.php?pic=2njvapz&s=9#.WL7zTfIWZSA

Been running for 5 Hours and temps are stable at 29C

Nice setup, which coin are you mining? Or are you mining multiple different coins?

[maleemk]

Anxiously waiting for the next group buy. i would like to see more payment options though.

[Quakenet]

My 10 Giants running like kittens no problem setting them up. Just like building legos...

http://tinypic.com/view.php?pic=2njvapz&s=9#.WL7zTfIWZSA

Been running for 5 Hours and temps are stable at 29C

Nice setup, which coin are you mining? Or are you mining multiple different coins?

Right now i got my miners pointed at Coinmine mining Dash.

I will take some pictures at 24hours to show some more "stabler" hashrates.

[Quakenet]

My 10 Giants running like kittens no problem setting them up. Just like building legos...

http://tinypic.com/view.php?pic=2njvapz&s=9#.WL7zTfIWZSA

Been running for 5 Hours and temps are stable at 29C

Nice setup, which coin are you mining? Or are you mining multiple different coins?

Right now i got my miners pointed at Coinmine mining Dash.

I will take some pictures at 24hours to show some more "stabler" hashrates.

Hashrates after 24hours running

[nu1mlock]

Hashrates after 24hours running

460 MH/s seems quite a long way from the advertised 900 MH/s. Or is that 4 Giants together?

[Quakenet]

Hashrates after 24hours running

460 MH/s seems quite a long way from the advertised 900 MH/s. Or is that 4 Giants together?

1 Giant has 2 boards.... on the picture you can see a total of 8 boards. I have 4 Giants hooked up together.

[nu1mlock]

1 Giant has 2 boards.... on the picture you can see a total of 8 boards. I have 4 Giants hooked up together.

Right, that makes sense. Thanks for confirming. I'm about to purchase a Giant myself tomorrow, so that's comforting. Too bad I missed the group buy opportunity though, could've saved quite a bit.

[MakeMyDay619]

1 Giant has 2 boards.... on the picture you can see a total of 8 boards. I have 4 Giants hooked up together.

Right, that makes sense. Thanks for confirming. I'm about to purchase a Giant myself tomorrow, so that's comforting. Too bad I missed the group buy opportunity though, could've saved quite a bit.

From baikal website? Go ahead and check if that's possible. They told me they are out of everything. I couldn't buy 2 Giants and later just 1. That's what they replied me:

We are out of stock of our miners at the moment, we do not have any infomation yet on when

our new stock of miners will be produced.

 

[nu1mlock]

From baikal website? Go ahead and check if that's possible. They told me they are out of everything. I couldn't buy 2 Giants and later just 1. That's what they replied me:

We are out of stock of our miners at the moment, we do not have any infomation yet on when

our new stock of miners will be produced.

 

Yeah, I spoke to them today and I can purchase one Giant (and only one) because I'm a new customer. I asked if I could get back to them tomorrow because I need to purchase the BTC and it was fine.

[scavern]

My 10 Giants running like kittens no problem setting them up. Just like building legos...

http://tinypic.com/view.php?pic=2njvapz&s=9#.WL7zTfIWZSA

Been running for 5 Hours and temps are stable at 29C

Thats' great to hear. My lowly Giant is running relatively cool at 34C. What are you mining?

[MakeMyDay619]

From baikal website? Go ahead and check if that's possible. They told me they are out of everything. I couldn't buy 2 Giants and later just 1. That's what they replied me:

We are out of stock of our miners at the moment, we do not have any infomation yet on when

our new stock of miners will be produced.

 

Yeah, I spoke to them today and I can purchase one Giant (and only one) because I'm a new customer. I asked if I could get back to them tomorrow because I need to purchase the BTC and it was fine.

It is crazy. Why can't you and I do a purchase together and buy 3 Giants? Why they make this limit of 1pc...

By the way don't you want to wait for another groupbuy? The guy who organizes this mentioned that there's something on the way...

[bittawm]

From baikal website? Go ahead and check if that's possible. They told me they are out of everything. I couldn't buy 2 Giants and later just 1. That's what they replied me:

We are out of stock of our miners at the moment, we do not have any infomation yet on when

our new stock of miners will be produced.

 

Yeah, I spoke to them today and I can purchase one Giant (and only one) because I'm a new customer. I asked if I could get back to them tomorrow because I need to purchase the BTC and it was fine.

It is crazy. Why can't you and I do a purchase together and buy 3 Giants? Why they make this limit of 1pc...

By the way don't you want to wait for another groupbuy? The guy who organizes this mentioned that there's something on the way...

I organize them

I have spent many hours here to help everyone get get that will ROI in good time.

We sold so many units that baikal has to produce more, we are selling them too fast, production is extremely limited at the moment

next time dont hesitate and jump on the group buy

I managed to get price down to $1900 from 2380 and now...the price is back up

I have done my best to keep prices as low as possible for as long as possible...

[scavern]

My 10 Giants running like kittens no problem setting them up. Just like building legos...

http://tinypic.com/view.php?pic=2njvapz&s=9#.WL7zTfIWZSA

Been running for 5 Hours and temps are stable at 29C

Thats' great to hear. My lowly Giant is running relatively cool at 34C. What are you mining?

Baikal have been super helpful. They waited 3 days for me to organize my BTC first...

[MakeMyDay619]

From baikal website? Go ahead and check if that's possible. They told me they are out of everything. I couldn't buy 2 Giants and later just 1. That's what they replied me:

We are out of stock of our miners at the moment, we do not have any infomation yet on when

our new stock of miners will be produced.

 

Yeah, I spoke to them today and I can purchase one Giant (and only one) because I'm a new customer. I asked if I could get back to them tomorrow because I need to purchase the BTC and it was fine.

It is crazy. Why can't you and I do a purchase together and buy 3 Giants? Why they make this limit of 1pc...

By the way don't you want to wait for another groupbuy? The guy who organizes this mentioned that there's something on the way...

I organize them

I have spent many hours here to help everyone get get that will ROI in good time.

We sold so many units that baikal has to produce more, we are selling them too fast, production is extremely limited at the moment

next time dont hesitate and jump on the group buy

I managed to get price down to $1900 from 2380 and now...the price is back up

I have done my best to keep prices as low as possible for as long as possible...

Exactly, here's the man! I recognize that and I'm thankful, hoping I'll get some of the goodies on next occasion!

And do you happen to know when would that be, hmmm?  Right now 2 shiny Giants for me and I'll be content

[nu1mlock]

It is crazy. Why can't you and I do a purchase together and buy 3 Giants? Why they make this limit of 1pc...

By the way don't you want to wait for another groupbuy? The guy who organizes this mentioned that there's something on the way...

I'm assuming that they're limiting it to one per customer in order to "get the word out" and when everyone has one Giant, they'll be tempted to purchase more when they are available. Instead of some people buying all stock and the rest goes to a competitor or buys nothing at all.

Of course I would like to be in a new group buy, but I have the feeling that it'll take quite a while before another one appears. Like the organizer just said, they're almost out of stock which means that there's not enough stock for a group buy. I might get unlucky though and who knows, there might appear a group buy a week after I purchased mine, but we're taking risks in the crypto world all the time.

[DebitMe]

If your looking for a giant, I have 3 and will let them go for $2250 plus shipping per unit in the United States.

Proof: https://www.nicehash.com/?p=miners&addr=17b52Fs9hTD24LyXUsAw3dGSCTKuiDsUuy

[MakeMyDay619]

If your looking for a giant, I have 3 and will let them go for $2250 plus shipping per unit in the United States.

Oh thanks, have to consider it. 1 for my friend nu1mlock I guess

As for me, I was thinking about 1950$ plus shipping to EU, that would be great.

By the way I wonder what would custom be like...   

[rubbertoe9]

If your looking for a giant, I have 3 and will let them go for $2250 plus shipping per unit in the United States.

Proof: https://www.nicehash.com/?p=miners&addr=17b52Fs9hTD24LyXUsAw3dGSCTKuiDsUuy

May I ask why you are selling?

[DebitMe]

If your looking for a giant, I have 3 and will let them go for $2250 plus shipping per unit in the United States.

Proof: https://www.nicehash.com/?p=miners&addr=17b52Fs9hTD24LyXUsAw3dGSCTKuiDsUuy

May I ask why you are selling?

I have plenty of machines running at my place and a baby on the way.  These were a great deal when I picked them up, but there is an opportunity here to flip them at a good profit margin and I will take the immediate profit, even though they will probably generate well over that over the next few months.

[Oldrik]

If your looking for a giant, I have 3 and will let them go for $2250 plus shipping per unit in the United States.

Proof: https://www.nicehash.com/?p=miners&addr=17b52Fs9hTD24LyXUsAw3dGSCTKuiDsUuy

May I ask why you are selling?

I have plenty of machines running at my place and a baby on the way.  These were a great deal when I picked them up, but there is an opportunity here to flip them at a good profit margin and I will take the immediate profit, even though they will probably generate well over that over the next few months.

Is possible to buy one of them from Spain?

[xxkaiwaxx]

If your looking for a giant, I have 3 and will let them go for $2250 plus shipping per unit in the United States.

Proof: https://www.nicehash.com/?p=miners&addr=17b52Fs9hTD24LyXUsAw3dGSCTKuiDsUuy

May I ask why you are selling?

I have plenty of machines running at my place and a baby on the way.  These were a great deal when I picked them up, but there is an opportunity here to flip them at a good profit margin and I will take the immediate profit, even though they will probably generate well over that over the next few months.

When did u purchase them again?

[miropp]

message from Baikal:
"we are out of stock of our miners at the moment, we do not have any infomation yet on when our new stock of miners will be produced"...

[IOTUSA]

message from Baikal:
"we are out of stock of our miners at the moment, we do not have any infomation yet on when our new stock of miners will be produced"...

Yep, that's the same message I got. and Pinidea were plain rude so screw them.

[Searing]

message from Baikal:
"we are out of stock of our miners at the moment, we do not have any infomation yet on when our new stock of miners will be produced"...

so from the above I gather they are out of EVERYTHING..(probably good for me thou..got some tax money...that should probably go instead for the dreaded 'real world stuff'
btc fantasy life is much more enjoyable

[LabaDaba]

With current profitability no wonder it got sold out

[maleemk]

I my  chat with Baikalminer over skype today, they confimed me that,  they will be back of stock within a month. Hope for the best.

[MigueJuve]

Hi all, is there any new groupbuy for baikal?

[bittawm]

Hi all, is there any new groupbuy for baikal?

https://bitcointalk.org/index.php?topic=1864345.msg18537998#msg18537998