blastbob (OP)
|
|
April 21, 2013, 04:35:12 AM Last edit: May 26, 2013, 03:31:00 PM by blastbob |
|
Quick and dirty Modified code can be found here - https://github.com/narken/p2pool-altcoinsInstructions for Ubuntu 12.04sudo apt-get update sudo apt-get install python-software-properties screen git python-rrdtool python-pygame python-scipy sudo apt-get install python-twisted python-twisted-web python-imaging build-essential libglib2.0-dev libglibmm-2.4-dev sudo apt-get install python-dev libboost-all-dev libdb++-dev autoconf automake ncurses-dev
Install Feathercoin Daemon:cd ~/ ; git clone https://github.com/FeatherCoin/FeatherCoin ; cd ~/FeatherCoin/src ; make -f makefile.unix USE_UPNP=- ; mv feathercoind ~/ mkdir ~/.feathercoin nano -w ~/.feathercoin/feathercoin.conf Add this text into ~/.feathercoin/feathercoin.confserver=1 daemon=1 rpcuser=rpcadmin rpcpassword=GenerateAgoodpasswordhere rpcport=9667 Fire Up Feathercoin daemon:Get p2pool modifed code for feathercoin:cd ~/ ; git clone https://github.com/Yorango/p2pool-ftc Install scrypt module for ltc that feathercoin uses (Need sudo) :cd ~/p2pool-fc/litecoin_scrypt ; sudo python setup.py install Start up your P2pool for Feathercoin!:screen -d -m -S fcpool ~/p2pool-fc/run_p2pool.py --net litecoin -a YourFCfeePayoutAddress -f 1 --give-author 0 --w 19327 --bitcoind-p2p-port 9336 --bitcoind-rpc-port 9337 rpcadmin yourgoodpasswordfromfeathercoin.confhere You can use screen -r to open up the p2pool console, or you can tail -f ~/p2pool-fc/data/feathercoin/log --w port (The port for the stat web interface and also the port where miners connect) -f number ( Fee you will get for running the pool, in percent) Some nice commands:tail -f ~/p2poolf-fc/data/feathercoin/log | grep BLOCK ----------------------- Thanks to paul21 for helping me find a few snags, and p2pool owner forrestv for creating the script. When using the git code mention over, your p2pool should be able to connect to the 2 other servers i have setup. Disclaimer:I have tried to get as much help as possible modifying the p2pool, but there has been some lack of interest there. But hey, it "works". Also might be some errors in the guide above, most can be solved with some linux skills. If not, post in the thread and you will get some help. This guide will focus on Ubuntu 12.04 and might work fine on other ubuntu platforms. There might be some code error showing up, but if shares are going through and stats seems fine, it should be working. Got any inputs on the code, please contact me, i need to modify the 2 live servers also if certain code is changed.
|
Bitrated user: blastbob.
|
|
|
|
|
|
|
|
The trust scores you see are subjective; they will change depending on who you have in your trust list.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
wmikrut
|
|
April 23, 2013, 07:18:50 PM Last edit: April 23, 2013, 07:46:54 PM by wmikrut |
|
Everything works great... just update your p2pool launch script from --bitcoind-rpc-port 9337 to --bitcoind-rpc-port 9667 Based on your feathercoin.conf file -- and everything is good! Edit: I noticed some console errors when running the process... and I am not sure if it will mess with the block found/payout logic. I am pointing some hashing power at P2Pool and hope that a block is found and paid out properly. I will post back once I see this is working without any problems.
|
I will NEVER ask for any kind of funds up front in a buy/sale of anything on bitcointalk.
BM-2cTFihJKmSwusMAoYuUHPvpx56Jozv64KK
|
|
|
Invest0r
Member
Offline
Activity: 112
Merit: 10
|
|
April 23, 2013, 08:54:30 PM |
|
Thanks. Very informative.
|
Speculating..
|
|
|
mr_random
Legendary
Offline
Activity: 1288
Merit: 1001
|
|
April 23, 2013, 08:56:48 PM |
|
Very nice guide. I might actually give this a go...
|
|
|
|
wmikrut
|
|
April 23, 2013, 09:47:07 PM |
|
I am receiving payments for blocks found. Very nice work
|
I will NEVER ask for any kind of funds up front in a buy/sale of anything on bitcointalk.
BM-2cTFihJKmSwusMAoYuUHPvpx56Jozv64KK
|
|
|
dolfcao
|
|
April 24, 2013, 06:21:06 AM |
|
Quick and dirty Modified code can be found here - https://github.com/chrda/p2pool-fcInstructions for Ubuntu 12.04sudo apt-get update sudo apt-get install python-software-properties screen git python-rrdtool python-pygame python-scipy sudo apt-get install python-twisted python-twisted-web python-imaging build-essential libglib2.0-dev libglibmm-2.4-dev sudo apt-get install python-dev libboost-all-dev libdb++-dev autoconf automake ncurses-dev
Install Feathercoin Daemon:cd ~/ ; git clone https://github.com/FeatherCoin/FeatherCoin ; cd ~/FeatherCoin/src ; make -f makefile.unix USE_UPNP=- ; mv feathercoind ~/ mkdir ~/.feathercoin nano -w ~/.feathercoin/feathercoin.conf Add this text into ~/.feathercoin/feathercoin.confserver=1 daemon=1 rpcuser=rpcadmin rpcpassword=GenerateAgoodpasswordhere rpcport=9667 Fire Up Feathercoin daemon:Get p2pool modifed code for feathercoin:cd ~/ ; git clone https://github.com/chrda/p2pool-fc.git Install scrypt module for ltc that feathercoin uses (Need sudo) :cd ~/p2pool-fc/litecoin_scrypt ; sudo python setup.py install Start up your P2pool for Feathercoin!:screen -d -m -S fcpool ~/p2pool-fc/run_p2pool.py --net feathercoin -a YourFCfeePayoutAddress -f 1 --give-author 0 --w 19327 --bitcoind-p2p-port 9336 --bitcoind-rpc-port 9337 rpcadmin yourgoodpasswordfromfeathercoin.confhere You can use screen -r to open up the p2pool console, or you can tail -f ~/p2pool-fc/data/feathercoin/log --w port (The port for the stat web interface and also the port where miners connect) -f number ( Fee you will get for running the pool, in percent) Some nice commands:tail -f ~/p2poolf-fc/data/feathercoin/log | grep BLOCK ----------------------- Thanks to paul21 for helping me find a few snags, and p2pool owner forrestv for creating the script. When using the git code mention over, your p2pool should be able to connect to the 2 other servers i have setup. Disclaimer:I have tried to get as much help as possible modifying the p2pool, but there has been some lack of interest there. But hey, it "works". Also might be some errors in the guide above, most can be solved with some linux skills. If not, post in the thread and you will get some help. This guide will focus on Ubuntu 12.04 and might work fine on other ubuntu platforms. There might be some code error showing up, but if shares are going through and stats seems fine, it should be working. Got any inputs on the code, please contact me, i need to modify the 2 live servers also if certain code is changed. I have successfuly setup my own feathercoin p2pool with the p2pool server running on virtualbox ubuntu 12.04, miner runing on win7 sp1 x64.
|
|
|
|
dolfcao
|
|
April 24, 2013, 08:20:36 AM |
|
Hey guys, I'm runing for about 4 hours to mine feathercoin using feathercoin p2pool, but I get nothing, anyone could help? It seems that all applications work fine.
|
|
|
|
dolfcao
|
|
April 24, 2013, 02:21:30 PM |
|
How to allow other pepole to mine use my feathercoin p2pool?
|
|
|
|
nesic1
|
|
April 26, 2013, 11:58:59 PM |
|
on what server should i put this? special or i can get it to work on my home PC?
|
|
|
|
Mushoz
|
|
April 29, 2013, 07:55:47 AM |
|
Getting tons of orphans and very low efficiency (60%). I've been mining a lot on P2Pool with different coins, and I've always had very good efficiency (> 100% most of the time). What could be my problem?
|
www.bitbuy.nl - Koop eenvoudig, snel en goedkoop bitcoins bij Bitbuy!
|
|
|
shakezula
|
|
April 29, 2013, 02:08:58 PM |
|
Thanks for the tutorial and p2pool modifications, this works great! The Fee payout doesn't seem to though, is that a problem of the p2pool modifications? Any chance of an update?
|
|
|
|
gyverlb
|
|
May 02, 2013, 09:47:17 PM |
|
This github repository gives me a 404.
|
|
|
|
shakezula
|
|
May 02, 2013, 11:02:11 PM |
|
Fee payout is still not working for me either. No worries, its all for fun. Thanks for your efforts!
|
|
|
|
|
wacko
Legendary
Offline
Activity: 1106
Merit: 1014
|
|
May 03, 2013, 10:59:30 AM |
|
Strange stuff indeed, the original repo is gone and the new one has feathercoin support stated in the description: "Only use this for feathercoin"... Yet the actual support of feathercoin mining was dropped without any comments.
|
|
|
|
caish5
|
|
May 03, 2013, 11:00:48 AM |
|
Has anyone got this working recently? I'm stuck around the p2pool git bit which doesn;t work. Will the chncoin git actually work for FC?
|
|
|
|
LeftToeCut
|
|
May 03, 2013, 11:51:48 AM |
|
uhm, can someone upload the fc pool?
|
|
|
|
Jude Austin
Legendary
Offline
Activity: 1140
Merit: 1000
The Real Jude Austin
|
|
May 03, 2013, 04:47:12 PM |
|
Where oh where did p2pool-fc go?
|
Buy or sell $100 of Crypto and get $10!
|
|
|
blastbob (OP)
|
|
May 03, 2013, 04:48:03 PM |
|
Ill remake one.. need food, give me an hour..
|
Bitrated user: blastbob.
|
|
|
Jude Austin
Legendary
Offline
Activity: 1140
Merit: 1000
The Real Jude Austin
|
|
May 03, 2013, 04:48:41 PM |
|
Ill remake one.. need food, give me an hour..
Thank you!
|
Buy or sell $100 of Crypto and get $10!
|
|
|
|