HagssFIN (OP)
Legendary
Offline
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
|
|
May 13, 2017, 01:45:36 PM |
|
The warzone in Ukraine is far more in east than where Kiev is located.
I think Hotmine is located in Kiev, since that is where my shipment was sent from.
|
|
|
|
mamontkiev
Jr. Member
Offline
Activity: 32
Merit: 1
|
|
May 14, 2017, 08:18:13 PM |
|
Hi guys. We based in Kiev and it is very far from war zone. We will be really happy if somebody from Europe or even from USA will come to our place and will see our R&D facility with miners and other equipment. By the way, Kiev is very beautiful city Next week we will get few dozens free (not prebooked) X6 upgrade kits and will contact with all who wrote us in PM or here. Additionally I will be in NYC from 16th till 25th of May attending Consensus 2017. If you don`t want to buy with advance payment, I can take 10 upgrade kits with me, meet in person and sell you in NYC. You can choose somebody from the city to be escrow/intermediary and send BTC to him if you from other parts of US. Please let me know if this acceptable for you and you want buy X6 upgrade kit in NYC. The price - $1000 for one pcs (1,15 kW, 7,5 Th/s).
|
|
|
|
Rabinovitch
Legendary
Offline
Activity: 2030
Merit: 1076
BTCLife.global participant
|
|
May 16, 2017, 07:36:10 AM |
|
Hi guys. The price - $1000 for one pcs (1,15 kW, 7,5 Th/s).
These numbers are fair, it's good. I was not able to get higher than 8 Th with my (S)X6 at 13.4 V.
|
|
|
|
|
HagssFIN (OP)
Legendary
Offline
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
|
|
May 17, 2017, 06:39:49 AM |
|
Nope. Only upgrade kits I have seen are Hotmine upgrade kits (X5 and X6) and then there is sidehack's retrofit project with Bitfury 16nm chips (in development). These two both are compatible with Antminer S1/S3/S5.
|
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
|
May 17, 2017, 01:24:33 PM |
|
Before I have upgrade boards I'll have a ~70W pod miner with BF16 chips.
|
|
|
|
|
ab1jx
|
|
May 17, 2017, 02:07:33 PM |
|
Before I have upgrade boards I'll have a ~70W pod miner with BF16 chips.
That's what I'm waiting for, if I can afford one. And I'll keep my Gridseed earning $4/month.
|
|
|
|
qctechno
|
|
May 18, 2017, 02:02:49 AM |
|
X5 upgrade is still in my wish list but summer almost here and I can't manage more heat for next 3 months.
|
|
|
|
Eagleone
Member
Offline
Activity: 98
Merit: 10
|
|
May 31, 2017, 03:56:29 AM |
|
I'll be reselling these in the USA I'm in the Seattle area if anyone wants to check them out.
Working on building the first X6 right now, I got 5 kits from Alex last week.
Give me a few hours hopefully I'll have it up and hashing.
|
|
|
|
jekecoin
|
|
June 02, 2017, 10:35:57 AM |
|
I'll be reselling these in the USA I'm in the Seattle area if anyone wants to check them out.
Working on building the first X6 right now, I got 5 kits from Alex last week.
Give me a few hours hopefully I'll have it up and hashing.
Then... they exists? How much can it be underclocket?
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
June 02, 2017, 03:42:16 PM |
|
SO these are real and soon to be sold in the US .... for how long ? ... before they start ripping off, sorry to put it that way but that's were it leads over time with something like this but I'll be watching and hoping ...
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4256
Merit: 8583
'The right to privacy matters'
|
|
June 02, 2017, 04:56:59 PM |
|
I'll be reselling these in the USA I'm in the Seattle area if anyone wants to check them out.
Working on building the first X6 right now, I got 5 kits from Alex last week.
Give me a few hours hopefully I'll have it up and hashing.
if you need escrow services let me know.
|
|
|
|
numnutz2009
|
|
June 03, 2017, 04:00:34 AM |
|
i have 4-5 antminer s5 kits minus the boards from when i put them in a water cooling setup if people r interested in controllers heatsinks and all that other stuff. shoot me a pm and we can work somethin out.
|
|
|
|
Eagleone
Member
Offline
Activity: 98
Merit: 10
|
|
June 03, 2017, 04:11:31 PM |
|
2 built 3 to go, I'm going to have them at CFlocations if anyone knows him. FYI I like Philipma for escrow only because he is active on the threads I read (+he is an internet community service superstar) I'm being told months until I can get more boards... so no one flip out. also I think the original S3 is best for the upgrade. you will need a beagle off eBay, but The heat sink is alot nicer. That will go for sidehacks boards as well We/I will of course buy ALL the boards/products sidehack comes out with in as large a quantity as can be afforded because he is stateside. I believe I have an interesting and new group of people to sell miners too that are not being reached by any of the resellers on this forum. I'm always going to distribute things I use myself. Thanks all for your positivity and support http://solo.ckpool.org/users/1Ln21nMVmeBjw8fJcMtxKi7MkckHXujQJnYou can see one of the X6's at the bottom of the list Pictures to come + I'll probably need my own thread for this
|
|
|
|
achtung082
|
|
June 03, 2017, 08:45:50 PM |
|
Why do you say the S3's are better?
|
Support sidehack projects: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr My Sales Wallet BTC:bc1qxtxsc86lessnrsm52gf7qgmqle75htdr03zdd7 - LTC:LNLKyKkGNCJakZudGjc2qg26yYz7oeo92k - ETH:0xDf1b17872D9Ff22F04270BbDA13556B3E1649E27
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
|
June 03, 2017, 09:54:06 PM |
|
Why not say the S3s are better? S3 is probably the most well-thought-out miner yet built by any company. Simple, reliable, solid, quiet. Everything everything these days is not.
Also, I've still got a whole stack of S5 beaglebones right now and will probably have a whole stack more for anyone who gets one of these kits.
|
|
|
|
achtung082
|
|
June 04, 2017, 02:36:58 AM Last edit: June 04, 2017, 02:48:08 AM by achtung082 |
|
Why do you say the S3's are better?
I meant why are they better as a donna for the parts. Is it price to buy or are the heatsinks better? I always thought the S1 - S5 hard parts were all the same.
|
Support sidehack projects: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr My Sales Wallet BTC:bc1qxtxsc86lessnrsm52gf7qgmqle75htdr03zdd7 - LTC:LNLKyKkGNCJakZudGjc2qg26yYz7oeo92k - ETH:0xDf1b17872D9Ff22F04270BbDA13556B3E1649E27
|
|
|
Eagleone
Member
Offline
Activity: 98
Merit: 10
|
|
June 04, 2017, 05:42:05 AM |
|
The S3 has a completely different grade of aluminum machining. Maybe meaningless in the long run but the fins are going to be a tad bid quieter.
I should mention these puppies take 4amp fans on both sides if you want to run them wide open. Ive moved it into my house for the evening and turned it down aggressively so it's hashing around 5.5 with antminer fans turned to 30%
Sorry for being a n00b but how do I put nice high res pictures on here ?
|
|
|
|
HagssFIN (OP)
Legendary
Offline
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
|
|
June 24, 2017, 11:19:40 AM |
|
Crap. The miner is still going on strong but the original fan of the power supply failed Fan-wise I don't recommend Enermax Revolution 87+ 1000W PSU for anyone. This is already third case in which I have to replace the original fan with a new one (I have a total amount of three of these power supplies).
|
|
|
|
|