[ANN] Minereum - First Self Mining Smart Contract

[keyboardwalking]

Recent update from Blockfolio on Minereum support. They'll be adding Livecoin.net

i send a message them like a week ago. they have gave me the same answer.

i think minereum will be on different exchange before blockfolio add livecoin.net

How would Blockfolio work with Genesis holders? If not you'll have to keep updating it everyday with 1.8 tokens.

stop whining

[1714768432]

1714768432

[1714768432]

1714768432

[1714768432]

1714768432

[1714768432]

1714768432

[Mrrr]

to Dev.

1- the service you just release wont create the demand.

2- you need to announce the next service which is for the main public and not only to the crypto community.
   if this service would create the demand for MNE ?

3- you know how important it is to have the Bittrex right ?
   there is not much volume for livecoin all it take only a few then it could knock the price down to the bottom.

1- the service that just went live, and works, is proof of the teams dedication and shows their not full of shit but actually develop stuff. IMO that is far more important than any actual use for the product right away.

2- Again, a solid distribution and a solid dev team with a unique concept will create demand.

3- There is a MNE rich list posted a couple of pages back. It was very very unimpressive. Initial distribution was fair and the release of tokens is controlled. We've had millions of volume over the last week so distribution got even better than it was already. This token, AFAIK, has no whales who could crash the market and the genesis holders can't dump because their tokens are locked.

I'm just answering this because I assume dev has better things to do.

[devlin]

Token Creation Service is released as planned, good work dev, now is easy for everyone to make their own tokens under ethereum network.

[curry2thaface]

Brilliant update! Good job dev!
Now we need a sexy webpage explaining how to use the service
 

[Voltaje]

I imagine that the service will eventually have a webpage, a better interface and a way to give decimals to it, this is the first version TCS 1.0 , there will be more in the future I'm sure.

[bitgo82]

to Dev.

1- the service you just release wont create the demand.

2- you need to announce the next service which is for the main public and not only to the crypto community.
   if this service would create the demand for MNE ?

3- you know how important it is to have the Bittrex right ?
   there is not much volume for livecoin all it take only a few then it could knock the price down to the bottom.

1- the service that just went live, and works, is proof of the teams dedication and shows their not full of shit but actually develop stuff. IMO that is far more important than any actual use for the product right away.

2- Again, a solid distribution and a solid dev team with a unique concept will create demand.

3- There is a MNE rich list posted a couple of pages back. It was very very unimpressive. Initial distribution was fair and the release of tokens is controlled. We've had millions of volume over the last week so distribution got even better than it was already. This token, AFAIK, has no whales who could crash the market and the genesis holders can't dump because their tokens are locked.

I'm just answering this because I assume dev has better things to do.

you need to face the reality. it cost Dev all the hard work, coding but take a look for all the ether coin base is more less 100 coins using ether base.
and each coin create using MNE cost only 1 . you know and see but wont admit ?

Dev need to change the requirement to create the token to somewhere 50 to 100 to minimize the potential scammer

[Gilboa]

Amazing job! Special thanks to the hardworking devs and the community.

[Mrrr]

Brilliant update! Good job dev!
Now we need a sexy webpage explaining how to use the service
 

For those who wish to follow into my footsteps:

Load your wallet on myethereumwallet.com

Send 1 MNE to 0x41fafb65b1514ce1177287a567002f8978d98205

Wait a couple of seconds and the transaction will pop up on http://tokenservice.minereum.com/.

Copy the smart contract address on the right,

Alt-tab the Hentai you were watching because you thought this would take longer.

Go back to myethereumwallet and click 'contracts'

Paste the smart contract address under 'smart contract address'.

Copy the 'Interface/ABI' from the pastebin link (click the link, scroll down and copy the RAW paste data part). Paste this into the 'ABI / JSON' box.

Click 'access'

From the drop down under ' Read / Write contract' select Setuptoken

Fill in whatever you feel like filling in.

Click ' write'

Hit 'submit transaction'

Click again because you are really sure.

And here we go another MNE burned, and from the ashes a new token rises.

[galaxiekyl]

good dev but service is too cheap..service price must be réevalued..50-100$ ~10mne seems be a reasonable price..and i think MNE must be burned until money supply is equal at 4,268 million MNE after what mne must be echange for token service and it must be in recirculated.

otherwise liqui seems be a good exchange..but they have not form if someone know how we can vote for enter in please tell us..or contact them

[bitgo82]

i been invest heavy in this coin, waiting for the next announce
wishing it could create the demand from everyone. and the Bittrex is important

[rebrik7]

What about bounty on social media?  Does anybody knows?

[lx001]

please explain me, why would somebody buy 10 minereum coins for $100 right now, when there are lots of people with genesis multiaccounts, and they get the same amount in 2 - 3 days doing nothing, and they will get them for another 40 years?

[Coinologist]

New Minereum Logo | Details below

I have been talking to the Minereum dev team.  They were interested in re-branding after the token creation service launch.

I have created a new concept logo below.  I don't think I have the rep to insert an image but please re-post in this thread for visibility and please encourage Minereum team to re-brand so that Minereum gets the attention it deserves.

http://imgur.com/a/rvFBH

[Gilboa]

New Minereum Logo | Details below

I have been talking to the Minereum dev team.  They were interested in re-branding after the token creation service launch.

I have created a new concept logo below.  I don't think I have the rep to insert an image but please re-post in this thread for visibility and please encourage Minereum team to re-brand so that Minereum gets the attention it deserves.

http://imgur.com/a/rvFBH

That logo is off. Almost looks like a dick. Post some more concepts.

[krisnajsadrak]

Introducing...

MINEREUM TOKEN CREATION SERVICE 1.0

The Token Creation Service is now live and allows anyone to create a fully compatible ERC20 Ethereum Token with just a minereum transaction.

Before using the service please take note of the following:

1. Always check this post before making a transaction to the service and follow its steps, the MNE price is dynamic and can be changed,
only transactions with the value >= the current price will be valid.
2. This is the first basic experimental version released to the public, our team will monitor it and will release updates if required.
3. DO NOT send transactions to the service from exchanges. You will not be able to Setup your token, transactions should be sent from an address that you have full control.
4. Any Minereum, Ether, or any other Token sent to the Service Address will be automatically destroyed and cannot be recovered.
5. All tokens generated by the service are 18 decimals

Current Price: 1 MNE
Token Creation Service Address: 0x41fAfB65B1514Ce1177287A567002f8978d98205

To Generate your Token, follow these steps:

1. Send 1 MNE (or higher) to the address 0x41fAfB65B1514Ce1177287A567002f8978d98205
(The Address you send the transaction from will be the only address that will be able to configure the Token, make sure you have control over it)
3. After few seconds you will see your transaction in the website http://tokenservice.minereum.com/
4. The transaction will be processed shortly, when all is done the status will be "Done" and your Token Address will be visible in the "Contract Address" Column

After this, you are in full control of your Token.

Source Code: https://pastebin.com/CD6Jas4A
Interface/ABI: https://pastebin.com/vfaret2t

Next steps are:

1. Add your Token to your Ethereum Wallet or simply use http://myetherwallet.com to interact with it

2. After you are able to Interact with the Contract, call the function SetupToken and set your Token Name, Token Symbol and Supply
  2.1 Only the Address that submitted the Minereum Transaction will be able to use this function
  2.2 This function can only be used once, so make sure the parameters you enter are correct
  2.3 The Total Supply will be attributed to the Address that submitted the Minereum Transaction

3. Refresh your wallet and you will see your address with your Token balance

4. If you need to add the Custom Token to your wallet use the following settings:
- Token Address: [YourTokenAddress] (from http://tokenservice.minereum.com/)
- Token Symbol: [YourTokenSymbol] (The one used in the setup)
- Token Decimals: 18

5. You will automatically have a block explorer available on http://etherscan.io:
https://etherscan.io/token/[YourTokenAddress]

We will update this post along the way with more useful info, including screenshots for all steps to be more clear.

dev ,, please update the thread with this news include,,
so everyone can read it,,

[Mrrr]

New Minereum Logo | Details below

I have been talking to the Minereum dev team.  They were interested in re-branding after the token creation service launch.

I have created a new concept logo below.  I don't think I have the rep to insert an image but please re-post in this thread for visibility and please encourage Minereum team to re-brand so that Minereum gets the attention it deserves.

http://imgur.com/a/rvFBH

That logo is off. Almost looks like a dick. Post some more concepts.

I don't see what is wrong with our 5 Rupee logo until we get a cease and desist from Nintendo.

EDIT: not to mention that he has 78 ' donate to the designer' links everywhere. I'd gladly donate to Coinologist if only I knew for certain he'd spend the money on designing classes and not on crack.

[Jcga]

Introducing...

MINEREUM TOKEN CREATION SERVICE 1.0

The Token Creation Service is now live and allows anyone to create a fully compatible ERC20 Ethereum Token with just a minereum transaction.

Before using the service please take note of the following:

1. Always check this post before making a transaction to the service and follow its steps, the MNE price is dynamic and can be changed,
only transactions with the value >= the current price will be valid.
2. This is the first basic experimental version released to the public, our team will monitor it and will release updates if required.
3. DO NOT send transactions to the service from exchanges. You will not be able to Setup your token, transactions should be sent from an address that you have full control.
4. Any Minereum, Ether, or any other Token sent to the Service Address will be automatically destroyed and cannot be recovered.
5. All tokens generated by the service are 18 decimals

Current Price: 1 MNE
Token Creation Service Address: 0x41fAfB65B1514Ce1177287A567002f8978d98205

To Generate your Token, follow these steps:

1. Send 1 MNE (or higher) to the address 0x41fAfB65B1514Ce1177287A567002f8978d98205
(The Address you send the transaction from will be the only address that will be able to configure the Token, make sure you have control over it)
3. After few seconds you will see your transaction in the website http://tokenservice.minereum.com/
4. The transaction will be processed shortly, when all is done the status will be "Done" and your Token Address will be visible in the "Contract Address" Column

After this, you are in full control of your Token.

Source Code: https://pastebin.com/CD6Jas4A
Interface/ABI: https://pastebin.com/vfaret2t

Next steps are:

1. Add your Token to your Ethereum Wallet or simply use http://myetherwallet.com to interact with it

2. After you are able to Interact with the Contract, call the function SetupToken and set your Token Name, Token Symbol and Supply
  2.1 Only the Address that submitted the Minereum Transaction will be able to use this function
  2.2 This function can only be used once, so make sure the parameters you enter are correct
  2.3 The Total Supply will be attributed to the Address that submitted the Minereum Transaction

3. Refresh your wallet and you will see your address with your Token balance

4. If you need to add the Custom Token to your wallet use the following settings:
- Token Address: [YourTokenAddress] (from http://tokenservice.minereum.com/)
- Token Symbol: [YourTokenSymbol] (The one used in the setup)
- Token Decimals: 18

5. You will automatically have a block explorer available on http://etherscan.io:
https://etherscan.io/token/[YourTokenAddress]

We will update this post along the way with more useful info, including screenshots for all steps to be more clear.

Congratulation, Vive Minereum !

[Coinologist]

New Minereum Logo | Details below

I have been talking to the Minereum dev team.  They were interested in re-branding after the token creation service launch.

I have created a new concept logo below.  I don't think I have the rep to insert an image but please re-post in this thread for visibility and please encourage Minereum team to re-brand so that Minereum gets the attention it deserves.

http://imgur.com/a/rvFBH

That logo is off. Almost looks like a dick. Post some more concepts.

I don't see what is wrong with our 5 Rupee logo until we get a cease and desist from Nintendo.

Current logo looks like someone elongated a cube and called it a day-- it looks like a rush job, just like the site, and the token creation service UI.  A developer did this stuff with templates, not a designer.

[Gilboa]

Current logo looks like someone elongated a cube and called it a day-- it looks like a rush job, just like the site, and the token creation service UI.  A developer did this stuff with templates, not a designer.

Sometimes things like a logo do not need to be over-designed. It's also clearly inspired by the Ether logo which is 100% understandable. Don't fix what isn't broken.

[shawnlives]

Introducing...

MINEREUM TOKEN CREATION SERVICE 1.0

The Token Creation Service is now live and allows anyone to create a fully compatible ERC20 Ethereum Token with just a minereum transaction.

Before using the service please take note of the following:

1. Always check this post before making a transaction to the service and follow its steps, the MNE price is dynamic and can be changed,
only transactions with the value >= the current price will be valid.
2. This is the first basic experimental version released to the public, our team will monitor it and will release updates if required.
3. DO NOT send transactions to the service from exchanges. You will not be able to Setup your token, transactions should be sent from an address that you have full control.
4. Any Minereum, Ether, or any other Token sent to the Service Address will be automatically destroyed and cannot be recovered.
5. All tokens generated by the service are 18 decimals

Current Price: 1 MNE
Token Creation Service Address: 0x41fAfB65B1514Ce1177287A567002f8978d98205

To Generate your Token, follow these steps:

1. Send 1 MNE (or higher) to the address 0x41fAfB65B1514Ce1177287A567002f8978d98205
(The Address you send the transaction from will be the only address that will be able to configure the Token, make sure you have control over it)
3. After few seconds you will see your transaction in the website http://tokenservice.minereum.com/
4. The transaction will be processed shortly, when all is done the status will be "Done" and your Token Address will be visible in the "Contract Address" Column

After this, you are in full control of your Token.

Source Code: https://pastebin.com/CD6Jas4A
Interface/ABI: https://pastebin.com/vfaret2t

Next steps are:

1. Add your Token to your Ethereum Wallet or simply use http://myetherwallet.com to interact with it

2. After you are able to Interact with the Contract, call the function SetupToken and set your Token Name, Token Symbol and Supply
  2.1 Only the Address that submitted the Minereum Transaction will be able to use this function
  2.2 This function can only be used once, so make sure the parameters you enter are correct
  2.3 The Total Supply will be attributed to the Address that submitted the Minereum Transaction

3. Refresh your wallet and you will see your address with your Token balance

4. If you need to add the Custom Token to your wallet use the following settings:
- Token Address: [YourTokenAddress] (from http://tokenservice.minereum.com/)
- Token Symbol: [YourTokenSymbol] (The one used in the setup)
- Token Decimals: 18

5. You will automatically have a block explorer available on http://etherscan.io:
https://etherscan.io/token/[YourTokenAddress]

We will update this post along the way with more useful info, including screenshots for all steps to be more clear.

Awesome Dev. To clarify, is this 1 for 1? So 1 MNE for a quantity 1 custom token? Or can someone deploy a custom token with any quantity of tokens, like 500, 1000, 10,000 etc.