ckpool.org CLOSED

[-ck]

Okay are we doing 5n?

Yes it's always been 5N.

okay tossed  a s17pro up for a while

Welcome aboard

[1714115800]

1714115800

[1714115800]

1714115800

[1714115800]

1714115800

[1714115800]

1714115800

[philipma1957]

Okay are we doing 5n?

Yes it's always been 5N.

okay tossed  a s17pro up for a while

Welcome aboard

keeps crashing

I put up a t15 lets see if it works


yeah its back up  I am in 10th place

now it is in 8th place

[pavesi]

Oh hell ya!  I go dark for a few days and come back to a block party!

Way to go peeps!

[pavesi]

keeps crashing

I put up a t15 lets see if it works


philipma - I had a similar issue with a s15 where it would crash (die with 0 hashrate).. It was due to power requirements in my case
as setting it to their low power mode made it run perfectly fine..   I removed another miner off that line and its running fine.  You
may want to play around and see if that maybe is your issue also.

[vickersja]

Ok - stupid question of the day..... 

How is the Active Miner tab sorted?  I cannot see the pattern.  I am number 17 but not sure by what criteria.  Thanks!

The headings at the top are what is listed:
 H/s 1h - H/s 1d - H/s 1w are your hour, day and week hashrate averages.
But...
My old and failing memory says that in order to keep things somewhat `current', the H/s over the latest 5 minute period (updated every 2 minutes?) is what the list is sorted by...
It's not a stupid question because if it's not actually listed then its not actually obvious...
Your 5 minute rate, which can vary quite widely, is shown on your User page, if your curious about that value...

Appreciate it gcanelson!

[philipma1957]

keeps crashing

I put up a t15 lets see if it works


philipma - I had a similar issue with a s15 where it would crash (die with 0 hashrate).. It was due to power requirements in my case
as setting it to their low power mode made it run perfectly fine..   I removed another miner off that line and its running fine.  You
may want to play around and see if that maybe is your issue also.

Not the case as it runs on other websites.

I have the T15 working fine.  I will add another piece of gear today.

I just added an s15  I will look in a bit to see if it works.

http://ckpool.org/#/miners

I am number 8

8)16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr__23.4TH/s__18.7TH/s__4.82TH/s__1_759,560,350_3602241257_100%_67,143,649,559_0.01811579


hash should move me to number 6

pool has crept past 1.76ph

[texasHedge]

keeps crashing

I put up a t15 lets see if it works


philipma - I had a similar issue with a s15 where it would crash (die with 0 hashrate).. It was due to power requirements in my case
as setting it to their low power mode made it run perfectly fine..   I removed another miner off that line and its running fine.  You
may want to play around and see if that maybe is your issue also.

Not the case as it runs on other websites.

I have the T15 working fine.  I will add another piece of gear today.

I just added an s15  I will look in a bit to see if it works.

http://ckpool.org/#/miners

I am number 8

8)16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr__23.4TH/s__18.7TH/s__4.82TH/s__1_759,560,350_3602241257_100%_67,143,649,559_0.01811579


hash should move me to number 6

pool has crept past 1.76ph

I think it has something to do with the firmware of the S17 Pro and some pool setting, possibly related to Asicboost. It works just fine in the solo CKPool. That’s the extent of my technical knowledge...

[philipma1957]

I now have

1 t15  = 23.4th
1 s15 = 26.9th
1 t17  = 39.7th


I should get close to 90 th    and land in the 4th or 5th spot
on that list at the link

http://ckpool.org/#/miners

I will mine here for a bit  maybe til the 1/2ing

[o_solo_miner]

I now have

1 t15  = 23.4th
1 s15 = 26.9th
1 t17  = 39.7th


I should get close to 90 th    and land in the 4th or 5th spot
on that list at the link

http://ckpool.org/#/miners

I will mine here for a bit  maybe til the 1/2ing

thank you, this pool needs more miner.

[Schulz91]

Hi, is it right that we have found this block?

https://imgur.com/a/OpcLTST

[vickersja]

Hi, is it right that we have found this block?

It looks like the last block was found on March 1 with CKPool.

https://btc.com/stats/pool/CKPool

[philipma1957]

Yeah  that was found by someone that used to mine here.

He found 2 or three blocks this month but he is not pointing hash to ck's pool

https://www.blockchain.com/btc/address/3P8sR3K8wAk3bom7tqpr5VrzCz9TVYNTQd

[Schulz91]

What does it mean?

[pavesi]

Hi, is it right that we have found this block?

No.. Sadly..
https://btc.com/stats/pool/unknown

622066 is attributed to an unknown pool.. Not sure why they would try and associate it with CKPool..

[-ck]

Hi, is it right that we have found this block?

No.. Sadly..
https://btc.com/stats/pool/unknown

622066 is attributed to an unknown pool.. Not sure why they would try and associate it with CKPool..

There are a few private pools using the ckpool software. Since the default software includes the /ckpool/ signature in a block, they mistakenly attribute it to this pool, but this pool has a ckpool.org signature as well.

[Ameador1]

I am getting ready to point a miner (or few) to your pool. But have a few questions.

Does it support ASICBoost?
Should I set my URL to other to use #xnsub?
Are there any other configs that can be set - like #xnsub?

Sorry, I looked around and didn't readily find these answers.

Thanks!

[philipma1957]

I am getting ready to point a miner (or few) to your pool. But have a few questions.

Does it support ASICBoost?
Should I set my URL to other to use #xnsub?
Are there any other configs that can be set - like #xnsub?

Sorry, I looked around and didn't readily find these answers.

Thanks!

it will do asic boost it does not need xnsub

that setting allows rapid switching on and off different renters.

here your btc addy stays pointed to the pool.

and just the pool no one rents your gear.

just be sure the btc addy you use is under your control.

this pool can be slow to hit a block. so it can take time to pay.

you can do what i do point some here and some to another pool that pays quickly.

we discussed it in the other thread.

i point 24th to this pool and 40 th to the other pool

[vickersja]

I am getting ready to point a miner (or few) to your pool. But have a few questions.

Does it support ASICBoost?
Should I set my URL to other to use #xnsub?
Are there any other configs that can be set - like #xnsub?

Sorry, I looked around and didn't readily find these answers.

Thanks!

it will do asic boost it does not need xnsub

that setting allows rapid switching on and off different renters.

here your btc addy stays pointed to the pool.

and just the pool no one rents your gear.

just be sure the btc addy you use is under your control.

this pool can be slow to hit a block. so it can take time to pay.

you can do what i do point some here and some to another pool that pays quickly.

we discussed it in the other thread.

i point 24th to this pool and 40 th to the other pool

I am in the same boat.  I support this pool and CK but I need a semi-steady payout.  I currently have about 12TH pointed here and a few NewPacs pointed at the solo pool.  I was reading through this thread at the glory days of the pool and hope it can become that again.  I have an S15 coming and will point it here also in low power mode - 17 more TH.

[Ameador1]

How often are payouts made from this pool? Is it only after a block has been found? It was nearly a year between the last 2 blocks if I understand this correctly - does that mean we have a year between payouts as well? I just need to make sure I don't allocate to much mining power here as I have to pay my utilities out of my mining earnings.

[os2sam]

How often are payouts made from this pool? Is it only after a block has been found?

That is correct.