Do you have a power supply ready? Do you need help with that part too?
Basically you need a computer power supply with enough wattage and enough PCIe connectors. Plug an ethernet cable into the miner. Connect the PCIe cables from the power supply. Make sure the power supply is jumpered so that it works without being in a computer. Connect the power supply to the outlet and then turn it on. Find out what IP address the miner got on the network, porbably check your router DHCP table for that. Enter the IP address into your browser. Then configure mining pools.
Thanks! That definitely helps. I do have a power supply and a break out board. Not sure what you mean when you say that the power supply needs to be jumpered
If you have a breakout board I believe that means you have a server power supply. I am not familiar with using those to power miners. But if you are using a regular PC power supply it won't turn on without being plugged into a motherboard so the way you get around that is to jumper two pins in the motherboard connector.
http://www.instructables.com/id/How-to-power-up-an-ATX-Power-Supply-without-a-PC/I just cut off a bend from a large paperclip and plug it in to the two pins needed.