[ANN] Xrevolution | POW | X11 | masternodes New wallet UPDATE

[benjy33]

WALLET ALL COINS  AND POST

[1714817988]

1714817988

[Perryl]

A little experiment. Who wants to get 5 coins for free, write down the address of the wallet, I'll send it, just write (preferably with a screenshot) it came or not. Check for the first 10 addresses

Xw2k5qMpuB1BCNgN98evxW6dd7pyJMJJ6i    wallet 64 bit

Sent.
What about wallet? It sync?

no

download blockchain

http://xrevolution.ddns.net/XrevCore.rar


The_Prof you have wrong wallet delete all and download new qt wallet

It's not just me then. Everyone linked to me does then.

yes exact All members have to update their portfolio of members have already done it and its roll
delete all data
download qt
download blockchain

http://xrevolution.ddns.net/XrevCore.rar

And when that doesn't work?

Was the same chain. Like I said originally, just keep it going till 2k blocks.

Keep what going? Waiting for 2k blocks and seeing if it will sync then?

Why hasn't this happened with any other currency? Obviously, the developer is failing somewhere along the lines.

[Coin-dev]

A little experiment. Who wants to get 5 coins for free, write down the address of the wallet, I'll send it, just write (preferably with a screenshot) it came or not. Check for the first 10 addresses

Xw2k5qMpuB1BCNgN98evxW6dd7pyJMJJ6i    wallet 64 bit

Sent.
What about wallet? It sync?

no
http://s16.radikal.ru/i191/1704/2b/18533b3bef53.png

download blockchain

http://xrevolution.ddns.net/XrevCore.rar


The_Prof you have wrong wallet delete all and download new qt wallet

It's not just me then. Everyone linked to me does then.

yes exact All members have to update their portfolio of members have already done it and its roll
delete all data
download qt
download blockchain

http://xrevolution.ddns.net/XrevCore.rar

And when that doesn't work?

Was the same chain. Like I said originally, just keep it going till 2k blocks.

Keep what goes? Waiting for 2k blocks and seeing if it will sync then?

Why hasn't this happened with any other currency? Obviously, the developer is failing somewhere along the lines.

This chain is dead it's other chain

[The_Prof]

If you read the previous post about orphans it would explain a bit. Plus it's not new. I have seen this a few times.

[cointron]

Exchange ?

[benjy33]

Exchange ?

Without exchange your coins are not worth

[octavarium]

yeah,, where exchanges ?
 

[benjy33]

yeah,, where exchanges ?
 

Your coins are not worth anything , delete wallet

[Perryl]

If you read the previous post about orphans it would explain a bit. Plus it's not new. I have seen this a few times.

I read your previous post. I'm not skipping over yours like you obviously are to mine. I asked several questions that went unanswered. It is still not syncing. With 13 connections and the .conf only having one node added. The one you linked me.

Neither you or the dev have been able to assist with this issue. The dev says you're on the wrong chain, you say your chain is the same as his bootstrap.

My last post was 12 minutes ago. Do you think it's normal to wait 12 minutes for a new chain to sync on a 120 mbps connection?

[manasd]

addnode=xrevmaster.ddns.net

latest chain and wallet.

Deleted chain and only using this node. Same issue.

17:55:30

Method not found (code -32601)

[Coin-dev]

exchange soon

on demand tradesatoshi, c-cex, yobit and poloniex

addnode=xrevolution.ddns.net

[logocreator]

Code:

Ho to enable and start running masternode?


1000 coins sent to new generated masternode address
masternode key generated and added to conf file

masternode start

Error: Not capable masternode: Could not connect to xxx.xxx.xxx.xxx:9090


my conf file:

rpcuser=xxx
rpcpassword=xxx
externalip=xxx.xxx.xxx.xxx
rpcallowip=127.0.0.1
rpcport=9091
port=9090
upnp=1
server=1
listen=1
daemon=1
rescan=0
reindex=1
defaultkey=1
logtimestamps=1
maxconnections=256
masternode=1
masternodeprivkey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
verifychain=0
dns=1
rpcthreads=30
addnode=185.173.33.92

Do i need to do something with "masternode.conf" file?
because i see one masternode is already runnnng, can you help me to run mine too ?

[Perryl]

A little experiment. Who wants to get 5 coins for free, write down the address of the wallet, I'll send it, just write (preferably with a screenshot) it came or not. Check for the first 10 addresses

Xw2k5qMpuB1BCNgN98evxW6dd7pyJMJJ6i    wallet 64 bit

Sent.
What about wallet? It sync?

no

download blockchain

http://xrevolution.ddns.net/XrevCore.rar


The_Prof you have wrong wallet delete all and download new qt wallet

It's not just me then. Everyone linked to me does then.

yes exact All members have to update their portfolio of members have already done it and its roll
delete all data
download qt
download blockchain

http://xrevolution.ddns.net/XrevCore.rar

And when that doesn't work?

Was the same chain. Like I said originally, just keep it going till 2k blocks.

Keep what goes? Waiting for 2k blocks and seeing if it will sync then?

Why hasn't this happened with any other currency? Obviously, the developer is failing somewhere along the lines.

This chain is dead it's other chain

I'm using your bootstrap. Are you saying you linked me a dead chain?

[The_Prof]

If you read the previous post about orphans it would explain a bit. Plus it's not new. I have seen this a few times.

I read your previous post. I'm not skipping over yours like you obviously are to mine. I asked several questions that went unanswered. It is still not syncing. With 13 connections and the .conf only having one node added. The one you linked me.

Neither you or the dev have been able to assist with this issue. The dev says you're on the wrong chain, you say your chain is the same as his bootstrap.

My last post was 12 minutes ago. Do you think it's normal to wait 12 minutes for a new chain to sync on a 120 mbps connection?

I guess your right. But the point I was trying to get across was until the difficulty is higher and the chains moves more slowly then the wallet will always show that syncing at 0 hours behind. If you watch the blockchain it does move accordingly and at a fast rate. I was not really concerned about the connection.

[manasd]

A little experiment. Who wants to get 5 coins for free, write down the address of the wallet, I'll send it, just write (preferably with a screenshot) it came or not. Check for the first 10 addresses

Xw2k5qMpuB1BCNgN98evxW6dd7pyJMJJ6i    wallet 64 bit

XqdacqnRgcxCXynqFoZYqXy3SVVfTaio4Z   wallet 64 bit

[Coin-dev]

Code:

Ho to enable and start running masternode?


1000 coins sent to new generated masternode address
masternode key generated and added to conf file

masternode start

Error: Not capable masternode: Could not connect to xxx.xxx.xxx.xxx:9090


my conf file:

rpcuser=xxx
rpcpassword=xxx
externalip=xxx.xxx.xxx.xxx
rpcallowip=127.0.0.1
rpcport=9091
port=9090
upnp=1
server=1
listen=1
daemon=1
rescan=0
reindex=1
defaultkey=1
logtimestamps=1
maxconnections=256
masternode=1
masternodeprivkey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
verifychain=0
dns=1
rpcthreads=30
addnode=185.173.33.92

Do i need to do something with "masternode.conf" file?
because i see one masternode is already runnnng, can you help me to run mine too ?

Code:

What are Masternodes:

1: Open the console of your wallet and enter the command:
   getaccountaddress MN
   masternode genkey
2: Send 1000 xrev to the address you just created. It must be exactly 1000, in one transaction.
3: Open the console of your wallet and enter the command:
   masternode outputs
4: Open or create the xrev.conf in folder directory for your wallet (C:\Users\Username\AppData\Roaming\xrevcore), write the following:
   masternode=1
   masternodeprivkey=masternode_genkey
 5: Open the masternode.conf in folder directory for your wallet (C:\Users\Username\AppData\Roaming\xrevcore), and edit as follows:
   MN your_box_ip:9090 masternode_genkey masternode_outputs
6: Close, and restart your wallet.
7: Open the console of your wallet and enter the command:
   masternode start-mn

Perryl Not at all but the string of 2000 block no longer exists it must start from zero

Chain stabilized by masternodes

[The_Prof]

A little experiment. Who wants to get 5 coins for free, write down the address of the wallet, I'll send it, just write (preferably with a screenshot) it came or not. Check for the first 10 addresses

Xw2k5qMpuB1BCNgN98evxW6dd7pyJMJJ6i    wallet 64 bit

Sent.
What about wallet? It sync?

no

download blockchain

http://xrevolution.ddns.net/XrevCore.rar


The_Prof you have wrong wallet delete all and download new qt wallet

It's not just me then. Everyone linked to me does then.

yes exact All members have to update their portfolio of members have already done it and its roll
delete all data
download qt
download blockchain

http://xrevolution.ddns.net/XrevCore.rar

And when that doesn't work?

Was the same chain. Like I said originally, just keep it going till 2k blocks.

Keep what goes? Waiting for 2k blocks and seeing if it will sync then?

Why hasn't this happened with any other currency? Obviously, the developer is failing somewhere along the lines.

This chain is dead it's other chain

I'm using your bootstrap. Are you saying you linked me a dead chain?

I am leaving my wallet open and running. My opinion is it will settle and all will be good. I am happy to keep loading blockchains if the dev requires but I will not be deleting everything and starting again. My view would be to wait. But it is his coin and he must decide.

[epicfailman]

At all.
1. Sync issue - YES
2. Maybe fork - YES
3. "Easy" start - YES
4. No pool - YES
5. No GPU mining - YES
6. No ASIC mining - YES
7. ...
8. ...
9. PRETTY LOGO - "@#$% YES!

[cointron]

Working ok, synced, mining.-

[antaja]

no sync, so only 1 masternodes run from the dev, feels like a 20% founder reward