benjy33
Legendary
Offline
Activity: 1339
Merit: 1002
|
|
April 25, 2017, 11:41:16 AM |
|
WALLET ALL COINS AND POST
|
|
|
|
Perryl
|
|
April 25, 2017, 11:42:31 AM |
|
A little experiment. Who wants to get 5 coins for free, write down the address of the wallet, I'll send it, just write (preferably with a screenshot) it came or not. Check for the first 10 addresses
Xw2k5qMpuB1BCNgN98evxW6dd7pyJMJJ6i wallet 64 bit Sent. What about wallet? It sync? no download blockchain http://xrevolution.ddns.net/XrevCore.rarThe_Prof you have wrong wallet delete all and download new qt wallet It's not just me then. Everyone linked to me does then. yes exact All members have to update their portfolio of members have already done it and its roll delete all data download qt download blockchain http://xrevolution.ddns.net/XrevCore.rarAnd when that doesn't work? Was the same chain. Like I said originally, just keep it going till 2k blocks. Keep what going? Waiting for 2k blocks and seeing if it will sync then? Why hasn't this happened with any other currency? Obviously, the developer is failing somewhere along the lines.
|
|
|
|
Coin-dev (OP)
Newbie
Offline
Activity: 42
Merit: 0
|
|
April 25, 2017, 11:45:21 AM |
|
A little experiment. Who wants to get 5 coins for free, write down the address of the wallet, I'll send it, just write (preferably with a screenshot) it came or not. Check for the first 10 addresses
Xw2k5qMpuB1BCNgN98evxW6dd7pyJMJJ6i wallet 64 bit Sent. What about wallet? It sync? no http://s16.radikal.ru/i191/1704/2b/18533b3bef53.pngdownload blockchain http://xrevolution.ddns.net/XrevCore.rarThe_Prof you have wrong wallet delete all and download new qt wallet It's not just me then. Everyone linked to me does then. yes exact All members have to update their portfolio of members have already done it and its roll delete all data download qt download blockchain http://xrevolution.ddns.net/XrevCore.rarAnd when that doesn't work? Was the same chain. Like I said originally, just keep it going till 2k blocks. Keep what goes? Waiting for 2k blocks and seeing if it will sync then? Why hasn't this happened with any other currency? Obviously, the developer is failing somewhere along the lines. This chain is dead it's other chain
|
|
|
|
The_Prof
|
|
April 25, 2017, 11:45:48 AM |
|
If you read the previous post about orphans it would explain a bit. Plus it's not new. I have seen this a few times.
|
Look over there...
|
|
|
cointron
|
|
April 25, 2017, 11:48:35 AM |
|
Exchange ?
|
|
|
|
benjy33
Legendary
Offline
Activity: 1339
Merit: 1002
|
|
April 25, 2017, 11:50:54 AM |
|
Exchange ?
Without exchange your coins are not worth
|
|
|
|
|
benjy33
Legendary
Offline
Activity: 1339
Merit: 1002
|
|
April 25, 2017, 11:55:06 AM |
|
Your coins are not worth anything , delete wallet
|
|
|
|
Perryl
|
|
April 25, 2017, 11:55:33 AM |
|
If you read the previous post about orphans it would explain a bit. Plus it's not new. I have seen this a few times.
I read your previous post. I'm not skipping over yours like you obviously are to mine. I asked several questions that went unanswered. It is still not syncing. With 13 connections and the .conf only having one node added. The one you linked me. Neither you or the dev have been able to assist with this issue. The dev says you're on the wrong chain, you say your chain is the same as his bootstrap. My last post was 12 minutes ago. Do you think it's normal to wait 12 minutes for a new chain to sync on a 120 mbps connection?
|
|
|
|
manasd
Sr. Member
Offline
Activity: 377
Merit: 250
Next Generation Antivirus
|
|
April 25, 2017, 11:55:42 AM |
|
addnode=xrevmaster.ddns.net
latest chain and wallet.
Deleted chain and only using this node. Same issue. 17:55:30  Method not found (code -32601)
|
|
|
|
Coin-dev (OP)
Newbie
Offline
Activity: 42
Merit: 0
|
|
April 25, 2017, 11:56:37 AM |
|
exchange soon
on demand tradesatoshi, c-cex, yobit and poloniex
addnode=xrevolution.ddns.net
|
|
|
|
logocreator
Legendary
Offline
Activity: 1134
Merit: 1000
www.cryptodesign.cc
|
|
April 25, 2017, 11:57:01 AM |
|
Ho to enable and start running masternode?
1000 coins sent to new generated masternode address masternode key generated and added to conf file
masternode start  Error: Not capable masternode: Could not connect to xxx.xxx.xxx.xxx:9090
my conf file:
rpcuser=xxx rpcpassword=xxx externalip=xxx.xxx.xxx.xxx rpcallowip=127.0.0.1 rpcport=9091 port=9090 upnp=1 server=1 listen=1 daemon=1 rescan=0 reindex=1 defaultkey=1 logtimestamps=1 maxconnections=256 masternode=1 masternodeprivkey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx verifychain=0 dns=1 rpcthreads=30 addnode=185.173.33.92
Do i need to do something with "masternode.conf" file? because i see one masternode is already runnnng, can you help me to run mine too ?
|
|
|
|
Perryl
|
|
April 25, 2017, 11:58:59 AM |
|
A little experiment. Who wants to get 5 coins for free, write down the address of the wallet, I'll send it, just write (preferably with a screenshot) it came or not. Check for the first 10 addresses
Xw2k5qMpuB1BCNgN98evxW6dd7pyJMJJ6i wallet 64 bit Sent. What about wallet? It sync? no download blockchain http://xrevolution.ddns.net/XrevCore.rarThe_Prof you have wrong wallet delete all and download new qt wallet It's not just me then. Everyone linked to me does then. yes exact All members have to update their portfolio of members have already done it and its roll delete all data download qt download blockchain http://xrevolution.ddns.net/XrevCore.rarAnd when that doesn't work? Was the same chain. Like I said originally, just keep it going till 2k blocks. Keep what goes? Waiting for 2k blocks and seeing if it will sync then? Why hasn't this happened with any other currency? Obviously, the developer is failing somewhere along the lines. This chain is dead it's other chainI'm using your bootstrap. Are you saying you linked me a dead chain?
|
|
|
|
The_Prof
|
|
April 25, 2017, 12:01:44 PM |
|
If you read the previous post about orphans it would explain a bit. Plus it's not new. I have seen this a few times.
I read your previous post. I'm not skipping over yours like you obviously are to mine. I asked several questions that went unanswered. It is still not syncing. With 13 connections and the .conf only having one node added. The one you linked me. Neither you or the dev have been able to assist with this issue. The dev says you're on the wrong chain, you say your chain is the same as his bootstrap. My last post was 12 minutes ago. Do you think it's normal to wait 12 minutes for a new chain to sync on a 120 mbps connection? I guess your right. But the point I was trying to get across was until the difficulty is higher and the chains moves more slowly then the wallet will always show that syncing at 0 hours behind. If you watch the blockchain it does move accordingly and at a fast rate. I was not really concerned about the connection.
|
Look over there...
|
|
|
manasd
Sr. Member
Offline
Activity: 377
Merit: 250
Next Generation Antivirus
|
|
April 25, 2017, 12:02:38 PM |
|
A little experiment. Who wants to get 5 coins for free, write down the address of the wallet, I'll send it, just write (preferably with a screenshot) it came or not. Check for the first 10 addresses
Xw2k5qMpuB1BCNgN98evxW6dd7pyJMJJ6i wallet 64 bit XqdacqnRgcxCXynqFoZYqXy3SVVfTaio4Z wallet 64 bit
|
|
|
|
Coin-dev (OP)
Newbie
Offline
Activity: 42
Merit: 0
|
|
April 25, 2017, 12:03:46 PM |
|
Ho to enable and start running masternode?
1000 coins sent to new generated masternode address masternode key generated and added to conf file
masternode start  Error: Not capable masternode: Could not connect to xxx.xxx.xxx.xxx:9090
my conf file:
rpcuser=xxx rpcpassword=xxx externalip=xxx.xxx.xxx.xxx rpcallowip=127.0.0.1 rpcport=9091 port=9090 upnp=1 server=1 listen=1 daemon=1 rescan=0 reindex=1 defaultkey=1 logtimestamps=1 maxconnections=256 masternode=1 masternodeprivkey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx verifychain=0 dns=1 rpcthreads=30 addnode=185.173.33.92
Do i need to do something with "masternode.conf" file? because i see one masternode is already runnnng, can you help me to run mine too ? What are Masternodes:
1: Open the console of your wallet and enter the command: getaccountaddress MN masternode genkey 2: Send 1000 xrev to the address you just created. It must be exactly 1000, in one transaction. 3: Open the console of your wallet and enter the command: masternode outputs 4: Open or create the xrev.conf in folder directory for your wallet (C:\Users\Username\AppData\Roaming\xrevcore), write the following: masternode=1 masternodeprivkey=masternode_genkey 5: Open the masternode.conf in folder directory for your wallet (C:\Users\Username\AppData\Roaming\xrevcore), and edit as follows: MN your_box_ip:9090 masternode_genkey masternode_outputs 6: Close, and restart your wallet. 7: Open the console of your wallet and enter the command: masternode start-mn
Perryl Not at all but the string of 2000 block no longer exists it must start from zero Chain stabilized by masternodes
|
|
|
|
The_Prof
|
|
April 25, 2017, 12:04:04 PM |
|
A little experiment. Who wants to get 5 coins for free, write down the address of the wallet, I'll send it, just write (preferably with a screenshot) it came or not. Check for the first 10 addresses
Xw2k5qMpuB1BCNgN98evxW6dd7pyJMJJ6i wallet 64 bit Sent. What about wallet? It sync? no download blockchain http://xrevolution.ddns.net/XrevCore.rarThe_Prof you have wrong wallet delete all and download new qt wallet It's not just me then. Everyone linked to me does then. yes exact All members have to update their portfolio of members have already done it and its roll delete all data download qt download blockchain http://xrevolution.ddns.net/XrevCore.rarAnd when that doesn't work? Was the same chain. Like I said originally, just keep it going till 2k blocks. Keep what goes? Waiting for 2k blocks and seeing if it will sync then? Why hasn't this happened with any other currency? Obviously, the developer is failing somewhere along the lines. This chain is dead it's other chainI'm using your bootstrap. Are you saying you linked me a dead chain? I am leaving my wallet open and running. My opinion is it will settle and all will be good. I am happy to keep loading blockchains if the dev requires but I will not be deleting everything and starting again. My view would be to wait. But it is his coin and he must decide.
|
Look over there...
|
|
|
epicfailman
|
|
April 25, 2017, 12:05:26 PM |
|
At all. 1. Sync issue - YES 2. Maybe fork - YES 3. "Easy" start - YES 4. No pool - YES 5. No GPU mining - YES 6. No ASIC mining - YES 7. ... 8. ... 9. PRETTY LOGO - "@#$% YES!
|
|
|
|
cointron
|
|
April 25, 2017, 12:14:28 PM |
|
Working ok, synced, mining.-
|
|
|
|
antaja
|
|
April 25, 2017, 12:15:36 PM |
|
no sync, so only 1 masternodes run from the dev, feels like a 20% founder reward
|
|
|
|
|