EthMonitoring \ EthControl (EWBF, Claymore's, CCMiner, AntMiner, Android/iOS)

[Nokia555]

Full guide: https://ethmonitoring.com/site/guide
EthControl guide: https://ethmonitoring.com/site/guide-eth-control
EthControl Linux guide: https://ethmonitoring.com/site/guide-eth-control-linux
Discord: https://discord.gg/xaSwKTt

iOS: https://itunes.apple.com/us/app/ethmonitoring/id1257053708
Android: https://play.google.com/store/apps/details?id=com.jldev.ethmonitoring

Youtube How-To: https://www.youtube.com/channel/UCQXtV0Is2xFBjG_FqlveyHw

Supported OS:
- Windows 7/10
- Ubuntu
- EthOS
- nvOC
- SimpleMining OS

Current version 0.0.33:

- Support SMS/Telegram/Push notifications when:
-- GPU temperature gets higher than required
-- GPU temperature gets lower than required
-- Miner is not responding for X amount of minutes
-- GPU Fan speed is lower than X
-- GPU Fan speed is higher than X
-- Miner hashrate too low
-- GPU hashrate too low

- Supports multiple miners with one local software installed.
- Log file support.
- CCMiner-Alexis 1.0
- CCMiner Palgin skunk mod
- CCMiner SP Skunk mods
- CCMiner >= 2.0
- EWBF Support
- XMR-Stak
- SGMiner
- dstm ZM
- EthMiner
- BMiner
- PhoenixMiner
- Excavator by NiceHash (1.4, 1.5)
- Claymore's Dual Miner support
- Added SSL support for data update.
- ASIC AntMiner support

Web service
- Profit monitoring
- Dailiy profit graph
- WhatToMine.com profit calculation based on current hashrate and power
- Hashrate graphs
- Temp graphs
- Power usage graphs

EthControl v0.0.19a

- Supports CCMiner auto-restart when CPU does not validate.
- Supports EWBF auto-restart when cuda device thread exited.
- Bulk updates for remote configuration / install.
- Ethminer full monitoring with GPU hashrate, GPU temp and GPU fan speeds.
- Remote rig reboot support.
- Remote stop/start support for mining software.
- Web console for remote diagnostics
- Automatic miner software installation support and updates
- GPU monitoring.
- Afterburner profile loading
- Starts with windows automatically
- Crash reports
- CCMiner "invalidate cpu" error auto-restart
- Easily deploy custom ccminer forks, claymore updates, custom software to multiple rigs

# Supports #
- CCminer
- Cast XMR
- EthMiner
- Claymore dual miner
- ZM dstm
- EWBF
- eMiner
- bMiner
- Phoenix Miner
- Excavator
- Gateless gate
- XMR-Stak
- Cast-XMR





EthControl for Linux 1.5.1

- Remote bulk updates.
- Remote reboot
- Remote software downloading.
- Remote console viewing available.
- Remote stop/start support for mining software.
- Allows config based OC settings

Code:

Setup steps for Linux

1. wget https://github.com/JamesSmith2/EthControlLinux/releases/download/1.5.1/EthControl1.5.1.zip && unzip EthControl1.5.1.zip && chmod +x EthControl
2. Example startup line: ./EthControl --accessToken=token --rigName=rig01
6. Go to EthMonitoring.com and open Configs
7. Add new config if not added yet
8. Go to new "Miners" and press console button right before "Edit" button on miner
9. Console visible and new configuration can bet set

How to use:
EthControl Linux: https://github.com/JamesSmith2/EthControlLinux
Linux CLI version: https://github.com/JamesSmith2/EthMonitoringLinux
Download windows binary from here: https://github.com/JamesSmith2/EthMonitoring/releases

Custom OC panel




Multiple miners supported, only needed to install one of the local miners.
Access token can be received and monitored from here: http://ethmonitoring.com/

Premium
1 Rig is free to use both EthControl & EthMonitoring software. More than 1 rig costs 2$ per 30 days.
More information about Premium: https://ethmonitoring.com/site/premium

Wallet monitoring system
Quick and easy overview
All your altcoin wallets are listed with latest balances in coin and selected currency.

   
Wallet balance graph overview
Graphical overview of your current different altcoin balances for a quick view.


CSV Exports and filtering for transactions
Supporting CSV exports and transaction filtering gives you availability to check out every date needed for proper overview.

   
Mobile overview
Easy to track balances and transactions from mobile.


Read more from: https://ethmonitoring.com/site/wallet-packages

[Nokia555]

Reserved

[manotroll]

Any fees?

[Nokia555]

Version 0.0.5:

- Added EWBF Support (https://www.upload.ee/image/7078290/ewbf.png)
- Telegram support for notifications

https://github.com/JamesSmith2/EthMonitoring/releases

[Nokia555]

Version 0.0.7:
Added support for CCMiner-Alexis 1.0

https://github.com/JamesSmith2/EthMonitoring/releases

[Nokia555]

Fixed http://monitoring.mylifegadgets.com registrering for new users.

[Nokia555]

Added profit calculation:
-- CCMiner Alexis - Based on current total hashrate + power calculation
-- ETH Dual miner - Based on current total hashrate + fixed power setting

Graph:
https://www.upload.ee/image/7096911/profit_graph.png

Table:
https://www.upload.ee/image/7096912/profit.png

[manotroll]

Could put a video on YouTube explaining how it works

[Nokia555]

Could put a video on YouTube explaining how it works

Check out this guide: http://mylifegadgets.com/setup-ethmonitoring-miner-software/

[Nokia555]

Added support for ETH+DCR and ETH+SC profit calculation.

Latest stats for monitoring software:

Miners online: 40 Users: 45

Feedback is appreciated 

[Nokia555]

Added support for ZPool.CA wallet profit monitoring. (Calculates last 24h profit).



Meanwhile we already have over 60 miners online 

[Nokia555]

Version: 0.0.8

-- Added custom port support (Host: 192.168.1.1:3333)
-- Changed workers logic.

[VyprBTC]

I tried it out for a little bit -

Is there a way to organize the workers? Currently it seems like they just group up by order of the refresh so if you have more than a couple miners, it gets all disorganized.

If it could be set in place and workers/groups not move that would be better for organization.

Great job so far though looks good.


Also -

10 stops and says offline after a while - 0.8 works without that glitch

I don't have any kind of graph or profit notes even though I added in all info on the charts - using localhost as host to make it simple.

[Nokia555]

I tried it out for a little bit -

Is there a way to organize the workers? Currently it seems like they just group up by order of the refresh so if you have more than a couple miners, it gets all disorganized.

If it could be set in place and workers/groups not move that would be better for organization.

Great job so far though looks good.


Also -

10 stops and says offline after a while - 0.8 works without that glitch

I don't have any kind of graph or profit notes even though I added in all info on the charts - using localhost as host to make it simple.

Hi,

The ordering was a glitch yes, i already changed it back to normal, adding ordering currently then. I'm working on version 11 currently to fix that offline problem. Will be released today. Currently there is only available daily profit chart, updated every 15min.

Thank you for the feedback.

[VyprBTC]

I tried it out for a little bit -

Is there a way to organize the workers? Currently it seems like they just group up by order of the refresh so if you have more than a couple miners, it gets all disorganized.

If it could be set in place and workers/groups not move that would be better for organization.

Great job so far though looks good.


Also -

10 stops and says offline after a while - 0.8 works without that glitch

I don't have any kind of graph or profit notes even though I added in all info on the charts - using localhost as host to make it simple.

Hi,

The ordering was a glitch yes, i already changed it back to normal, adding ordering currently then. I'm working on version 11 currently to fix that offline problem. Will be released today. Currently there is only available daily profit chart, updated every 15min.

Thank you for the feedback.

Thank you for your hard work - I know it's not easy  I had someone write me a php script to manage and monitor a couple THOUSAND android phones running pay to click programs - it was NOT EASY lol.

[Nokia555]

I tried it out for a little bit -

Is there a way to organize the workers? Currently it seems like they just group up by order of the refresh so if you have more than a couple miners, it gets all disorganized.

If it could be set in place and workers/groups not move that would be better for organization.

Great job so far though looks good.


Also -

10 stops and says offline after a while - 0.8 works without that glitch

I don't have any kind of graph or profit notes even though I added in all info on the charts - using localhost as host to make it simple.

Hi,

The ordering was a glitch yes, i already changed it back to normal, adding ordering currently then. I'm working on version 11 currently to fix that offline problem. Will be released today. Currently there is only available daily profit chart, updated every 15min.

Thank you for the feedback.

Thank you for your hard work - I know it's not easy  I had someone write me a php script to manage and monitor a couple THOUSAND android phones running pay to click programs - it was NOT EASY lol.

Hi,

I have over 12 years of experiences with 7+ languages for coding, it isn't really hard for me actually. Just limited time to code it properly.

[VyprBTC]

Very cool! I wish I learned how to code earlier on.

Do you plan on monetizing this somehow in the future? Adsense on the site or some sort of RAT installation tool lol

[Nokia555]

Very cool! I wish I learned how to code earlier on.

Do you plan on monetizing this somehow in the future? Adsense on the site or some sort of RAT installation tool lol

I really don't want to add any advertisements, those will kill the mood on it i think. I'm working on premium features but those i make just to pay the server fees, because many users require much server power to handle them and it costs BTC for me.

[VyprBTC]

Just did a quick test - it's offline for Claymore 9.5

*edit  -  started working on its own

Thanks

[VyprBTC]

I forgot to bind the api in the .bat

--api 0.0.0.0:42000