macbain68
Newbie
Offline
Activity: 13
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 12, 2013, 11:56:52 AM Last edit: June 12, 2013, 12:12:45 PM by macbain68 |
|
So, ich habe mir jetzt die sourcen für den cgminer 3.1.1 gezogen und alles nochmals neu komiliert. Läuft bisher stabiler als die Version 3.2.0, die ich vorher am Laufen hatte. Jedenfalls gibt es keine ZOMBIEs mehr ;-) Die Anzahl der HW Errors dürfte von der wackeligen Stromversorgung herrühren. Daran wird sich erst was ändern, wenn ich mir endlich einen passenden aktiven USB Hub besorgt habe. http://mos-eisley.de/Bildschirmfoto-Terminal-1.pngWo kriegt man eigentlich die Sourcen für den bfgminer 3.0.99 her? Also die Version, die die USB ASIC miner überhaupt erkennt? Und noch was: wo kann man denn die Temperatur der Miner abfragen? Steht das irgendwo in cgminer und ich habs nur übersehen oder braucht man dafür ein eigenes Tool?
|
|
|
|
rupy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 12, 2013, 03:59:24 PM |
|
HW with your new heat-sink?
Will let it run for a while, I suspect same HW/A but longer life... ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fforumbilder.se%2FCEJ31%2Fbild.jpeg&t=665&c=SlwLP-aBi0_iEQ)
|
BANKBOOK GWT Wallet & no-FIAT Billing API
|
|
|
ct1aic
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 12, 2013, 05:50:22 PM |
|
Will let it run for a while, I suspect same HW/A but longer life... ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fforumbilder.se%2FCEJ31%2Fbild.jpeg&t=665&c=SlwLP-aBi0_iEQ) Greetings, rupy. Where did you bought the heatsink? I think the ASIC of the USB Gizmo is 6 mm x 6 mm, am I right?
|
Rui Costa, Portugal - BTC : 1ct1aicGoUVpZeovsw3cCcPJZJHV5JXtW
|
|
|
|
ct1aic
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 12, 2013, 06:59:06 PM |
|
Thanks, rupy. But why did you took off the original (lovely) heatsink? With the 2, wouldn't be better?
|
Rui Costa, Portugal - BTC : 1ct1aicGoUVpZeovsw3cCcPJZJHV5JXtW
|
|
|
alibert
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 12, 2013, 07:27:50 PM |
|
Active cooling both sides. HW errors down to 0.5%
|
|
|
|
Coiner.de
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 12, 2013, 09:26:09 PM |
|
So no thermal paste or tape?
There is something between PCB and aluminium. Non sticky thermal pad probably. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimg844.imageshack.us%2Fimg844%2F2658%2Fusbjq.jpg&t=665&c=pJvuOiFZWAj-sQ)
|
|
|
|
rupy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2013, 12:24:11 AM |
|
HW/A is 0.8 again... we'll see after a couple of days. You can feel the air movement above the HS, I hope it's doing something atleast.
|
BANKBOOK GWT Wallet & no-FIAT Billing API
|
|
|
yxt (OP)
Legendary
Offline
Activity: 3528
Merit: 1116
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2013, 06:19:17 AM |
|
@rupy
is there another heatsink on the back?
|
BTC | Kano Pool | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ | | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ | | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ |
|
|
|
rupy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2013, 06:42:14 AM |
|
Hm, no, but that's an idea; don't know how I would attach it though?!
|
BANKBOOK GWT Wallet & no-FIAT Billing API
|
|
|
yxt (OP)
Legendary
Offline
Activity: 3528
Merit: 1116
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2013, 06:43:37 AM |
|
re-mount the old one ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
BTC | Kano Pool | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ | | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ | | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ |
|
|
|
alibert
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2013, 07:15:43 AM |
|
Active cooling both sides. HW errors down to 0.5%
Now back to 0.8% seems cooling and HW errors are not related.
|
|
|
|
yxt (OP)
Legendary
Offline
Activity: 3528
Merit: 1116
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2013, 07:24:03 AM |
|
Active cooling both sides. HW errors down to 0.5%
Now back to 0.8% seems cooling and HW errors are not related. +1 thats what i am saying. Lifetime will be interesting
|
BTC | Kano Pool | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ | | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ | | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ |
|
|
|
ewibit
Legendary
Offline
Activity: 2955
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2013, 05:22:47 PM |
|
now I have this errors: Icarus (ttyUSB1) ERROR: Selftest error. Expected nonce 0xFFFFFEEA but got 0xB317598E. Icarus (ttyUSB1) ERROR: Too many errors, giving up 2013.06.13 [17:42] Icarus (ttyUSB3): Not getting any results. Retuning timers. 2013.06.13 [17:49] Icarus (ttyUSB3): Not getting any results. Retuning timers. 2013.06.13 [17:49] Icarus (ttyUSB3) ERROR: Selftest error. Expected nonce 0x00000112 but got 0x0171DF3B. anyone know what to do? TIA
|
|
|
|
alibert
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2013, 05:37:45 PM |
|
re-plug ASIC and use powered USB-Port
|
|
|
|
ewibit
Legendary
Offline
Activity: 2955
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2013, 05:45:39 PM |
|
re-plug ASIC and use powered USB-Port
I have done replugging a few times (and it is a powered USB HUB..) (LEDs are green and on one item green LED is (was) blinking) ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) it has worked 3 days in this constellation without problems..
|
|
|
|
nottm28
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2013, 06:57:33 PM |
|
Tried re-installing the driver?
|
donations not accepted
|
|
|
nottm28
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2013, 06:59:25 PM |
|
|
donations not accepted
|
|
|
ewibit
Legendary
Offline
Activity: 2955
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2013, 07:32:34 PM |
|
Tried re-installing the driver?
I am on Linux (Ubuntu 12.04)...
|
|
|
|
nottm28
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 13, 2013, 07:53:00 PM |
|
Tried re-installing the driver?
I am on Linux (Ubuntu 12.04)... Have you got a windows pc you can test the usb's on - just to prove they are working - will isolate the problem to the linux environment at least...
|
donations not accepted
|
|
|
|