kjr2686 (OP)
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 14, 2017, 01:59:57 PM |
|
I'm new to this. I studies for a long time to get everything right and I'm running into a wall. I'm sure whatever i'm missing is something staring me in the face, but here it goes..
I am using claymore. I have the 15.xx version of my GPU driver installed. Here is what pops up in my miner, I cant figure it out.
C:\Users\Ken\Desktop\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.5 - Catalyst 15.12-17.x - CUDA 8.0_7.5_6.5\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.5>EthDcrMiner64.exe -epool us1.ethermine.org:4444 -mode 1 -allpools 1 -ewal 8d81500bc8547fdeff2d89f57d3ad8f611230edf3868b5b31aabbf1e917083bd.rig1 -epsw x
╔════════════════════════════════════════════════════════════════╗ ║ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.5 ║ ╚════════════════════════════════════════════════════════════════╝
ETH: 1 pool is specified Main Ethereum pool is us1.ethermine.org:4444
Catalyst 15.12 is REQUIRED for best performance and compatibility For Polaris cards, use latest drivers At least 16 GB of Virtual Memory is required for multi-GPU systems Make sure you defined GPU_MAX_ALLOC_PERCENT 100 Be careful with overclocking, use default clocks for first tests Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool OpenCL initializing...
AMD Cards available: 1 GPU #0: Fiji, 4096 MB available, 64 compute units GPU #0 recognized as Fury X/Nano POOL/SOLO version GPU #0: algorithm ASM No NVIDIA CUDA GPUs detected. Total cards: 1 ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1) ETH: eth-proxy stratum mode "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details. ETH: Stratum - Connected (us1.ethermine.org:4444) Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333
ETH: Share rejected! Socket was closed remotely (by pool) ETH: Job timeout, disconnect, retry in 20 sec... ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444 ETH: Stratum - Connected (us1.ethermine.org:4444) ETH: Share rejected! Socket was closed remotely (by pool) ETH: Job timeout, disconnect, retry in 20 sec...
If i leave it running, it will just keep rejecting shares.. What do I do here?
|
|
|
|
zend7
|
|
June 14, 2017, 02:16:15 PM |
|
I'm new to this. I studies for a long time to get everything right and I'm running into a wall. I'm sure whatever i'm missing is something staring me in the face, but here it goes..
I am using claymore. I have the 15.xx version of my GPU driver installed. Here is what pops up in my miner, I cant figure it out.
C:\Users\Ken\Desktop\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.5 - Catalyst 15.12-17.x - CUDA 8.0_7.5_6.5\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.5>EthDcrMiner64.exe -epool us1.ethermine.org:4444 -mode 1 -allpools 1 -ewal 8d81500bc8547fdeff2d89f57d3ad8f611230edf3868b5b31aabbf1e917083bd.rig1 -epsw x
╔════════════════════════════════════════════════════════════════╗ ║ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.5 ║ ╚════════════════════════════════════════════════════════════════╝
ETH: 1 pool is specified Main Ethereum pool is us1.ethermine.org:4444
Catalyst 15.12 is REQUIRED for best performance and compatibility For Polaris cards, use latest drivers At least 16 GB of Virtual Memory is required for multi-GPU systems Make sure you defined GPU_MAX_ALLOC_PERCENT 100 Be careful with overclocking, use default clocks for first tests Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool OpenCL initializing...
AMD Cards available: 1 GPU #0: Fiji, 4096 MB available, 64 compute units GPU #0 recognized as Fury X/Nano POOL/SOLO version GPU #0: algorithm ASM No NVIDIA CUDA GPUs detected. Total cards: 1 ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1) ETH: eth-proxy stratum mode "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details. ETH: Stratum - Connected (us1.ethermine.org:4444) Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333
ETH: Share rejected! Socket was closed remotely (by pool) ETH: Job timeout, disconnect, retry in 20 sec... ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444 ETH: Stratum - Connected (us1.ethermine.org:4444) ETH: Share rejected! Socket was closed remotely (by pool) ETH: Job timeout, disconnect, retry in 20 sec...
If i leave it running, it will just keep rejecting shares.. What do I do here?
First you need to move this topic to the appropriate section the MINING ALTCOINS section here https://bitcointalk.org/index.php?board=160.0 as there this topic will be read by users who do mining. I also suggest you try to mine with Nicehash software to see if it is a problem of configuration. If with Nicehash it works, then you have configured your batch file in a wrong way or with some errors. But better you get help at the section of mining altcoin, use move topic at the bottom left of the page to move your topic there.
|
|
|
|
Ahead
Member
Offline
Activity: 74
Merit: 10
IT Solutions Architect
|
|
June 14, 2017, 02:29:36 PM |
|
I'm new to this. I studies for a long time to get everything right and I'm running into a wall. I'm sure whatever i'm missing is something staring me in the face, but here it goes..
I am using claymore. I have the 15.xx version of my GPU driver installed. Here is what pops up in my miner, I cant figure it out.
C:\Users\Ken\Desktop\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.5 - Catalyst 15.12-17.x - CUDA 8.0_7.5_6.5\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.5>EthDcrMiner64.exe -epool us1.ethermine.org:4444 -mode 1 -allpools 1 -ewal 8d81500bc8547fdeff2d89f57d3ad8f611230edf3868b5b31aabbf1e917083bd.rig1 -epsw x
╔════════════════════════════════════════════════════════════════╗ ║ Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.5 ║ ╚════════════════════════════════════════════════════════════════╝
ETH: 1 pool is specified Main Ethereum pool is us1.ethermine.org:4444
Catalyst 15.12 is REQUIRED for best performance and compatibility For Polaris cards, use latest drivers At least 16 GB of Virtual Memory is required for multi-GPU systems Make sure you defined GPU_MAX_ALLOC_PERCENT 100 Be careful with overclocking, use default clocks for first tests Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool OpenCL initializing...
AMD Cards available: 1 GPU #0: Fiji, 4096 MB available, 64 compute units GPU #0 recognized as Fury X/Nano POOL/SOLO version GPU #0: algorithm ASM No NVIDIA CUDA GPUs detected. Total cards: 1 ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444 ETHEREUM-ONLY MINING MODE ENABLED (-mode 1) ETH: eth-proxy stratum mode "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details. ETH: Stratum - Connected (us1.ethermine.org:4444) Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333
ETH: Share rejected! Socket was closed remotely (by pool) ETH: Job timeout, disconnect, retry in 20 sec... ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444 ETH: Stratum - Connected (us1.ethermine.org:4444) ETH: Share rejected! Socket was closed remotely (by pool) ETH: Job timeout, disconnect, retry in 20 sec...
If i leave it running, it will just keep rejecting shares.. What do I do here?
Hi, I think your Eth address is wrong... it should be something like 0x........... That's why pool is closing the connection on you ---> Socket was closed remotely (by pool) Your's looks to big to me... Check it out!
|
|
|
|
alani123
Legendary
Offline
Activity: 2520
Merit: 1484
|
|
June 14, 2017, 02:36:21 PM |
|
Indeed the ethereum address in the config you're running the miner with seems invalid and could very well be the reason the pool diconnects. Try setting a valind ETH address and see how it goes.
|
| Duelbits | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ | | TRY OUR UNIQUE GAMES! ◥ DICE ◥ MINES ◥ PLINKO ◥ DUEL POKER ◥ DICE DUELS | | | | █▀▀ █ █ █ █ █ █ █ █ █ █ █ █▄▄ | ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ | ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ | ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ | ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ | ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ | | ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ KENONEW ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ | ▀▀█ █ █ █ █ █ █ █ █ █ █ █ ▄▄█ | | 10,000x MULTIPLIER | | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ | | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ |
[/tabl
|
|
|
crypticj
|
|
June 14, 2017, 02:39:51 PM |
|
Indeed the ethereum address in the config you're running the miner with seems invalid and could very well be the reason the pool diconnects. Try setting a valind ETH address and see how it goes.
Yep Incorrect address format.
|
|
|
|
kjr2686 (OP)
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 14, 2017, 04:54:58 PM |
|
thanks everyone. I noticed it as soon as i put up this thread. I knew is was something retarded.
|
|
|
|
orcmaster
Newbie
Offline
Activity: 10
Merit: 0
|
|
October 18, 2017, 11:19:30 PM |
|
hey guys similar error but i actually have the correct Ether wallet from myetherwallet site directly can someone help me out and let me know why it is not working I got nicehash working so not sure why this is not ill post my code and the error i get for you guys to see thanks
setx GPU_FORCE_64BIT_PTR 1 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x755B0D8310F977c2427AfF530D44DDa0F0049D32/ orc
THIS IS THE ERROR I GET _______________________________________________________________
This pool (eth-eu2.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported. However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee. Please read "Readme" file for details.This pool (eth-eu2.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported. However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee. Please read "Readme" file for details.Pool eth-eu2.nanopool.org removed from the list This pool (eth-us-east1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported. However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee. Please read "Readme" file for details.This pool (eth-us-east1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported. However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee. Please read "Readme" file for details.Pool eth-us-east1.nanopool.org removed from the list This pool (eth-us-west1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported. However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee. Please read "Readme" file for details.This pool (eth-us-west1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported. However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee. Please read "Readme" file for details.Pool eth-us-west1.nanopool.org removed from the list This pool (eth-asia1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported. However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee. Please read "Readme" file for details.This pool (eth-asia1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported. However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee. Please read "Readme" file for details.Pool eth-asia1.nanopool.org removed from the list ETH: 1 pool is specified Main Ethereum pool is eu1.ethermine.org:4444 DCR: 4 pools are specified Main Decred pool is pasc-eu2.nanopool.org:15555 AMD OpenCL platform not found Be careful with overclocking, use default clocks for first tests Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool CUDA initializing...
NVIDIA Cards available: 1 CUDA Driver Version/Runtime Version: 9.0/8.0 GPU #0: GeForce GTX 970, 4096 MB available, 13 compute units, capability: 5.2
Total cards: 1 DUAL MINING MODE ENABLED: ETHEREUM+DECRED ETH: eth-proxy stratum mode Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333
ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.220.188> port 4444 ETH: Stratum - Connected (eu1.ethermine.org:4444) ETH: Share rejected! Socket was closed remotely (by pool) ETH: Job timeout, disconnect, retry in 20 sec... DCR: Stratum - connecting to 'pasc-eu2.nanopool.org' <198.251.88.21> port 15555 DCR: Stratum - Connected (pasc-eu2.nanopool.org:15555) DCR: Authorized DCR: 10/18/17-16:18:03 - New job from pasc-eu2.nanopool.org:15555 DCR: 10/18/17-16:18:07 - New job from pasc-eu2.nanopool.org:15555 DCR: 10/18/17-16:18:09 - New job from pasc-eu2.nanopool.org:15555 ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.220.188> port 4444 ETH: Stratum - Connected (eu1.ethermine.org:4444) ETH: Share rejected! Socket was closed remotely (by pool) ETH: Job timeout, disconnect, retry in 20 sec... GPU0 t=73C fan=70%
|
|
|
|
Ahead
Member
Offline
Activity: 74
Merit: 10
IT Solutions Architect
|
|
October 26, 2017, 10:57:40 AM |
|
hey guys similar error but i actually have the correct Ether wallet from myetherwallet site directly can someone help me out and let me know why it is not working I got nicehash working so not sure why this is not ill post my code and the error i get for you guys to see thanks
setx GPU_FORCE_64BIT_PTR 1 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x755B0D8310F977c2427AfF530D44DDa0F0049D32/ orc
THIS IS THE ERROR I GET _______________________________________________________________
This pool (eth-eu2.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported. However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee. Please read "Readme" file for details.This pool (eth-eu2.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported. However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee. Please read "Readme" file for details.Pool eth-eu2.nanopool.org removed from the list This pool (eth-us-east1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported. However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee. Please read "Readme" file for details.This pool (eth-us-east1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported. However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee. Please read "Readme" file for details.Pool eth-us-east1.nanopool.org removed from the list This pool (eth-us-west1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported. However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee. Please read "Readme" file for details.This pool (eth-us-west1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported. However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee. Please read "Readme" file for details.Pool eth-us-west1.nanopool.org removed from the list This pool (eth-asia1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported. However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee. Please read "Readme" file for details.This pool (eth-asia1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported. However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee. Please read "Readme" file for details.Pool eth-asia1.nanopool.org removed from the list ETH: 1 pool is specified Main Ethereum pool is eu1.ethermine.org:4444 DCR: 4 pools are specified Main Decred pool is pasc-eu2.nanopool.org:15555 AMD OpenCL platform not found Be careful with overclocking, use default clocks for first tests Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool CUDA initializing...
NVIDIA Cards available: 1 CUDA Driver Version/Runtime Version: 9.0/8.0 GPU #0: GeForce GTX 970, 4096 MB available, 13 compute units, capability: 5.2
Total cards: 1 DUAL MINING MODE ENABLED: ETHEREUM+DECRED ETH: eth-proxy stratum mode Watchdog enabled Remote management (READ-ONLY MODE) is enabled on port 3333
ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.220.188> port 4444 ETH: Stratum - Connected (eu1.ethermine.org:4444) ETH: Share rejected! Socket was closed remotely (by pool) ETH: Job timeout, disconnect, retry in 20 sec... DCR: Stratum - connecting to 'pasc-eu2.nanopool.org' <198.251.88.21> port 15555 DCR: Stratum - Connected (pasc-eu2.nanopool.org:15555) DCR: Authorized DCR: 10/18/17-16:18:03 - New job from pasc-eu2.nanopool.org:15555 DCR: 10/18/17-16:18:07 - New job from pasc-eu2.nanopool.org:15555 DCR: 10/18/17-16:18:09 - New job from pasc-eu2.nanopool.org:15555 ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.220.188> port 4444 ETH: Stratum - Connected (eu1.ethermine.org:4444) ETH: Share rejected! Socket was closed remotely (by pool) ETH: Job timeout, disconnect, retry in 20 sec... GPU0 t=73C fan=70%
Correct format: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x755B0D8310F977c2427AfF530D44DDa0F0049D32.YOURWORKER -epsw x
|
|
|
|
orcmaster
Newbie
Offline
Activity: 10
Merit: 0
|
|
October 26, 2017, 08:20:55 PM |
|
Thank you sir i got it now
|
|
|
|
|