[ANN] GirlsToken-2.0 - 2.3-ALPHA in testing now[ANN]

[Ethereuming]

The mac is not very new...MAC OS X 10.6.8
 yes 2.1.1.2 version
Yes error message...

Ahhh that is the issue there. Due to enabling qrcode support, a minimum of version 10.7 is required. I apologize, and will build a version compatible with older versions as soon as i am off work 9pm est.

Ok dev, I wait...
Thanks  

Ok, so it seems I was incorrect in remembering why the wallet needed to be compiled with 10.7+ as a base. It was not qrcode support, but was libc++11. It would seem that Apple has decided to only officially support libc++ on 10.7... so I will have to add an hdd to my hackintosh [or possibly just a VM] and setup a 10.6.8 build to be able to properly compile for versions 10.7 and under.
All this is to say, I am working on it but may take a bit longer then a simple re-compile as I originally thought.

Ok no problem, I wait

[El marinero]

Coinexchange and yobbit wallet shows online but my transaction did not arrive

0eb6ce55a6cb9c3c7685ec8ecee17107ece5f82447e8316b56c08e3aa4ca4c12

let's see if you can fix it, 70,001 coins

[kurbeks]

Yobit has old wallet version as they almost never update wallets. So that coins are probably lost

[Ethereuming]

EXCHANGES

1)CoinMarkets <- OPEN FOR TRADING BTC and DOGE
2) CoinExchange.io <- OPEN FOR TRADING

3)Yobit.net <- Waiting on response

[El marinero]

Yobit has old wallet version as they almost never update wallets. So that coins are probably lost

This dev is wak shit I think so far, his own explorer doesn't work, coins can;t be lost, just stolen money if the case

[l8nit3]

Yobit has old wallet version as they almost never update wallets. So that coins are probably lost

This dev is wak shit I think so far, his own explorer doesn't work, coins can;t be lost, just stolen money if the case

Listen "Tami" your FUD does not work. You do not read, you are the worst part of crypto.
A transaction on the wrong chan WILL NEVER GO THROUGH. You and the whole community were warned of this.
So here is your answer "Tami", DO SOME ACTUAL WORK and fix your own coin. You have been reported to mod, and are now on ignore.

@Rest of community
Thank you for your assistance in explaining this once again

[l8nit3]

Raspi daemon tested and working on raspi3 , at this point unsure about earlier models.
Pi Daemon

Also finally found a working copy of a 10.6.8 vm, so just gotta install all deps and xcode, and build should be ready in a day or so

And lastly, for those that do not know this yet, coinsmarkets.com is an exchange that also allows you to stake POS coins in the wallet. Similar to a POS pool

[l8nit3]

Pool/Explorer is intermittent right now, however main seed node is still rocking. Once finished on some small changes to the XGTC code [which I feel is more important as we have 2 other pools right now], I will focus the needed time and energy to get the pool/explorer back up and running.

UPDATE
I have the 2.1.1.3 update currently building while I am at work. This will add the miniupnpc 1.9 support added by inder/redni, some qt icon fixes, some qt pro fixes, and will update the noblocks version to stop recieving info from the old 1.0.8 versions. And lastly it adds 2 more seed nodes for faster syncing.
Also we are getting quite near block 450k when our new POS % and removal of superblocks will kick in.
Once we pass 450k I will add a new checkpoint in the code which will be in the 2.1.1.4 release

UPDATE
2.1.1.3 has been released, building the pi daemon now. Also the bootstrap.dat has been updated to 445k+ blocks.
OP has been updated with new links, and new additions to roadmap. However I am unable to load up virustotal.com right now and as such the virustotal results have not yet been updated.

2.1.1.3 includes:

-New upnp code for 1.9 provided by inder/redni
-Added multi-inv message support - see litecoin commit 1f3d3647ffb49943f485c9a663f0644ca7d110de
-Many small fixes in qt files
-Small icon based fixes
-NoBlocks version change to completely cut off 1.0.8 wallets
-Add 2 more seed nodes for quicker syncing

<edit>
VirusTotal results have been updated in OP for 2.1.1.3 release

<edit2>
Have looked into a CoinsMarketCap listing, however they require a website that displays current total supply for the coin. I am not used to very much PHP but am in the process of adding it as a stat on the pool explorer [which I will share with other yiimp pool owners if it works]. Once this is working we should be ready for a listing on CoinMarketCap which should help the project get some more visibility

UPDATE
Now that 2.1.1.3 is out I will be pulling down and rebuilding the pool, with much more focus on better DDOS security as we seem to have had some "interesting" traffic over the past few days.
This process will likely take a few days as I will be restarting from a fresh clean server, and using things I have learned since it was first built, hopefully making a nicer stronger pool for all to use, and hopefully with the "coin supply" addition to the explorer.
Once this is finished I will update here and l8nit3-miners should be running happily again :)
I thank the other pool owners for continuing to host mining for XGTC at their pools, it is incredibly helpful while I work on the dev pool

Outstanding coins from pool sent manually:
txid=79bebf0b7baf774790e500aa4a1702af4b3b674983d3a4ec4f7ead43ff637913

[l8nit3]

Small UI change to help separate mined transactions from staked transactions. Will be included in next build.

[Xamito]

l8nit3, I really admire your work and like the project. I own some coins and will get some more as they are really cheap right now. Keep up with the good work and ignore all the fudding.

[kondrat84]

We overcame a 450,000 block !!what's next?

[kondrat84]

L8nit3,I know that you have very little free time.But we know that everything will work out for you.And we will all be in + 

[l8nit3]

Thank you all for your support and kind words 😊
As for "whats next".... i will be attempting to add a "Total current supply" stat to the pool after its rebuild. This will allow us to try for a coinmarketcap listing.

On top of that I am still working in the background to complete the 3.0 software which will be of a 9.x codebase with many new features and UI updates.

Following that are plans for Bloom and SPV integration allowing a quick loading android wallet to be built.

And finally, after these important steps, we will be working on market adoption and real world uses such as donations to charities that support and help drive women in tech.

Although if the community has any other ideas I would be happy to hear  them 😊

[kondrat84]

Unfortunately I'm not a programmer,Pleased to help.Than I can, I will help, write pm

[l8nit3]

2017-07-31 17:19:05 l8nit3
MAINTENANCE REQUEST free - SourceCode Update - XGTC/XGTC

Still no response..... if some of the community also put in requests for the update, maybe they will see it is important and get to work on it. However, in my experience yobit can be quite slow in these situations...

[kurbeks]

2017-07-31 17:19:05 l8nit3
MAINTENANCE REQUEST free - SourceCode Update - XGTC/XGTC

Still no response..... if some of the community also put in requests for the update, maybe they will see it is important and get to work on it. However, in my experience yobit can be quite slow in these situations...

If it's Yolobit you can forget about it. Might try to write in Russian though.

[kreatoralex]

POW is ended? But

[l8nit3]

POW is ended? But

I am at my day job, but will look into it the second I can...
<edit>
strangely the pools seem to still be running fine.... is there an error you are getting?
Blockmonsta

[2017-08-24 14:35:44] Starting Stratum on stratum+tcp://blockmonsta.ddnss.de:3401
[2017-08-24 14:35:44] 2 miner threads started, using 'scrypt' algorithm.
[2017-08-24 14:35:48] Stratum difficulty set to 256
[2017-08-24 14:42:56] accepted: 1/1 (100%), 227.20 kH, 5981.36 H/s yes!

lpool.name

[2017-08-24 17:34:32] Starting Stratum on stratum+tcp://lpool.name:3433
[2017-08-24 17:34:32] 2 miner threads started, using 'scrypt' algorithm.
[2017-08-24 17:34:32] Stratum difficulty set to 4
[2017-08-24 17:35:08] accepted: 1/1 (100%), 118.42 kH, 6889.44 H/s yes!

<edit>
So looking at the explorer it seems the last POW block actually found was 461631, and there may be an issue with GBT [getblocktemplate]. Which is quite strange considering we are well past the 450k mark when all changes kicked in, and a final POW block of 1mil is hardcoded in the codebase... some examples below:

....rpcmining.cpp.....

if (pindexBest->nHeight >= LAST_POW_BLOCK)
        throw JSONRPCError(RPC_MISC_ERROR, "No more PoW blocks");

....main.cpp....

if (IsProofOfWork() && nHeight > LAST_POW_BLOCK)
        return DoS(100, error("AcceptBlock() : reject proof-of-work at height %d", nHeight));

...main.h.....

static const int LAST_POW_BLOCK = 1000000;

I am back home from work and am working furiously on a fix for all. I am currently going over all commits and changes to see if it was a mistake made by me during updates, or if it was a bug in the code used as a base, the minute I have new info I will update here.
Thank you for bringing this to my attention. Once fixed and all is known to be well, I will send you 500XGTC from my personal wallet for the bug report

<edit>
Offering a 5000 XGTC bounty to anyone in the community who can locate the issue before I can. Im not asking for fixes, I will do the fixes, but extra eyes make finding a bug much quicker and will allow mining to resume for all much quicker.
It does not seem to be in "getblocktemplate" or "getwork" or "getworkex" functions, as I have already compared these to other coins code, and all matches perfectly.

[l8nit3]

getwork is working fine, and is properly sending to the miner, and I havent received any errors at this point,
also after checking the explorer one again I see POW blocks are coming in just fine....

Age   Height   Difficulty   Type   Tx   Conf   Blockhash
2m   463536   0.26768756   PoW   1   4   00000000aae7677f88424ee3e645ca533faa0cc652797370356cc289b3fbc9ed
2m   463535   0.28815713   PoW   1   5   0000000176154593c4a0400ce9fb7df34de8d84594beaf56d30d6debab114210
3m   463534   0.02993912   PoS   2   6   918a86d549de24e028070b23c712fe344138b6fd4dd254ebe7ffcf0df7b0ecc2
3m   463533   0.02946948   PoS   2   7   534445044277ef16596ed42eb93811073b106b8b8a040f3508add40b3a6509ef
4m   463532   0.02842938   PoS   2   8   13cd5537dffecf1fe3f82ffc3fd1c53016de3185351ef421097a5abd8774184a
4m   463531   0.26668647   PoW   1   9   0000000072545a3fe35291e4eb886ac2caaff8ca4346b7d4ec1f300bd873d487

So im not quite sure what error you may be having, but if you provide more details I would be happy to help any way I can It's possible the long time between POW blocks may be due to a fairly large drop in hashrate ,although I will watch closely in case it happens again.

On a side note, now that this issue has been cleared up, I will be working on the pool again, and will hopefully be up in the next couple days

[l8nit3]

UPDATE
I am currently testing the pool, and am making small updates in the background. It is currently up, but I recommend not mining with us yet until all has been tested and I have updated here with the go ahead.

Bootstrap.dat updated to 469800 blocks 0/27/2017

<edit>
On a complete side note, absolutely nothing to do with XGTC, but...
NETFLIX has just added a documentary called "Banking on Bitcoin"
Just thought the community might like to know