[ANN] Prospector - Multi-Coin GPU+CPU cryptocurrency miner

[dexxa05]

Hi,

I tested the 0.0.7 version on my RX 480 and RX 470 mining Signatum and sometimes hashrate dropped from 20mh to 500kh

I have deleted info.db but it's not solving the probelm.

Just go back to 0.0.5 it's better for me.

Thx

[semtexzv]

Hi,

I tested the 0.0.7 version on my RX 480 and RX 470 mining Signatum and sometimes hashrate dropped from 20mh to 500kh

I have deleted info.db but it's not solving the probelm.

Just go back to 0.0.5 it's better for me.

Thx

What OS, what driver ?

[dexxa05]

Hi,

I tested the 0.0.7 version on my RX 480 and RX 470 mining Signatum and sometimes hashrate dropped from 20mh to 500kh

I have deleted info.db but it's not solving the probelm.

Just go back to 0.0.5 it's better for me.

Thx

What OS, what driver ?

Win10 and 16.9.1

[semtexzv]

Hi,

I tested the 0.0.7 version on my RX 480 and RX 470 mining Signatum and sometimes hashrate dropped from 20mh to 500kh

I have deleted info.db but it's not solving the probelm.

Just go back to 0.0.5 it's better for me.

Thx

What OS, what driver ?

If you have your cards overclocked, have you tried dropping the clocks a bit ?

[dexxa05]

Hi,

I tested the 0.0.7 version on my RX 480 and RX 470 mining Signatum and sometimes hashrate dropped from 20mh to 500kh

I have deleted info.db but it's not solving the probelm.

Just go back to 0.0.5 it's better for me.

Thx

What OS, what driver ?

If you have your cards overclocked, have you tried dropping the clocks a bit ?

Not OC I use original bios.

[semtexzv]

Hi,

I tested the 0.0.7 version on my RX 480 and RX 470 mining Signatum and sometimes hashrate dropped from 20mh to 500kh

I have deleted info.db but it's not solving the probelm.

Just go back to 0.0.5 it's better for me.

Thx

What OS, what driver ?

Win10 and 16.9.1

Well, I am running on radeon ReLive suite 17.7.2 with 17.30 driver packaging version, which should be the newest, and seems to work on on 1 GPU, try upgrading to that version.

[semtexzv]

NEW VERSION UP!!



I have finished the 0.0.7 release which brings awesome new kernels for AMD RX 4** and 5** . Stock RX 570 can now do about 19.2 MH/s.
New version also contains fixes for slow status reporting, and saves miner logs into 'logs' directory.

https://github.com/semtexzv/Prospector/releases/tag/0.0.7-ALPHA


Note: If you have RX 290 performance might be lower or higher, I don't really know how will this new kernel work on these devices.
If you have these devices, please report your hashrates, and whether they are lower or higher than previous versions.

Nvidia miners are unaffected, miner uses old kernel on Nvidia devices.


Enjoy

Graphics Intel can also get a signatum? My Iris Pro 6200 was not detected in the config file (i7 5775c)

what driver is required ?
Because I only get 15mh for a rx470 with new prospector

Dag Fix Driver Beta.

At what frequency does the GPU have such a result?

You have to manually enter configuration for them. I am curently working on back end OpenCL stuff because I have RX 570 available, but later this week I will work on usability stuff.

[Lindworm]

If you are working with linux an experience this error:

################################ OPENCL ERROR ###############################

Error executing function: clCreateCommandQueue

Status error code: CL_OUT_OF_HOST_MEMORY (-6)

Please visit the following url for more information:

https://www.khronos.org/registry/cl/sdk/1.2/docs/man/xhtml/clCreateCommandQueue.html#errors

#############################################################################
), State { next_error: None, backtrace: None }) restarting

reinstall OpenCL. In my case it was an old config I dragged around for some version updates. Reinstall is easier as fixing config

[semtexzv]

If you are working with linux an experience this error:

################################ OPENCL ERROR ###############################

Error executing function: clCreateCommandQueue

Status error code: CL_OUT_OF_HOST_MEMORY (-6)

Please visit the following url for more information:

https://www.khronos.org/registry/cl/sdk/1.2/docs/man/xhtml/clCreateCommandQueue.html#errors

#############################################################################
), State { next_error: None, backtrace: None }) restarting

reinstall OpenCL. In my case it was an old config I dragged around for some version updates. Reinstall is easier as fixing config

Please reply with your system details including which packages you have installed ( versions of drivers ) on the github issue. I wanna create a wiki page with list of known good configurations.

[cpuwar]

Hi,

I tested the 0.0.7 version on my RX 480 and RX 470 mining Signatum and sometimes hashrate dropped from 20mh to 500kh

I have deleted info.db but it's not solving the probelm.

Just go back to 0.0.5 it's better for me.

Thx

Yea, the same thing  happen to me!! Whatever high or low setting for core and memory it is happening..on my rx480s

[TokenCOP]

Could not optimize the program, does it work in ETH pools? We see that many speak but only of a specific currency

[phylton]

Running 6x 570 nitros 4gb on windows 64bit.

Ver. 0.0.6: ~113 mh/s
Ver. 0.0.7: ~123 mh/s

Much much faster initializing GPUs also.

Great job  ! Now just going monitor the stability of this version. Will let you know how that goes.

Hello! What driver are you using? I was getting an avg of ~119 or something hashrate with the same GPUs on version 0.0.6 but I'm getting half of it on v0.0.8.
What driver should I use?

Thanks

[semtexzv]

Running 6x 570 nitros 4gb on windows 64bit.

Ver. 0.0.6: ~113 mh/s
Ver. 0.0.7: ~123 mh/s

Much much faster initializing GPUs also.

Great job  ! Now just going monitor the stability of this version. Will let you know how that goes.

Hello! What driver are you using? I was getting an avg of ~119 or something hashrate with the same GPUs on version 0.0.6 but I'm getting half of it on v0.0.8.
What driver should I use?

Thanks

new versions should be faster on these cards, did you stop other miners before testing ?

[phylton]

Running 6x 570 nitros 4gb on windows 64bit.

Ver. 0.0.6: ~113 mh/s
Ver. 0.0.7: ~123 mh/s

Much much faster initializing GPUs also.

Great job  ! Now just going monitor the stability of this version. Will let you know how that goes.

Hello! What driver are you using? I was getting an avg of ~119 or something hashrate with the same GPUs on version 0.0.6 but I'm getting half of it on v0.0.8.
What driver should I use?

Thanks

new versions should be faster on these cards, did you stop other miners before testing ?

Yes, I stopped all miners and booted the computer. I deleted all files and extracted 0.0.6 back, and now I'm getting 97 MH/s instead of the aforementioned 119. Just trying to find newest drivers to see if it'll solve the problem with newer prospector versions

[vuli]

0.0.7 version mine a bit faster for me, but something is not quite right. After some time, or If I do anything with PC, system crashes, BSOD.. (thread stuck of something)

[Branko]

Mine works well, I'm mining on last version since it came out, and play GW2 on that PC
from time to time

[phylton]

Hello. I updated my driver to the latest version on AMDs site, dated july 27th, v17.7.2 and now I can succesfully run Prospector 0.0.8, but my MSI Afterburner does not let me OC my gpus. Does anyone know a quick fix for this? I'm getting 112 MH/s with 6 rx 570, which is pretty good for stock, but I want to OC it

[Skol600ml]

Hello. I updated my driver to the latest version on AMDs site, dated july 27th, v17.7.2 and now I can succesfully run Prospector 0.0.8, but my MSI Afterburner does not let me OC my gpus. Does anyone know a quick fix for this? I'm getting 112 MH/s with 6 rx 570, which is pretty good for stock, but I want to OC it

Uinistall 17.7.2 and install 17.7.1

[Branko]

Hello. I updated my driver to the latest version on AMDs site, dated july 27th, v17.7.2 and now I can succesfully run Prospector 0.0.8, but my MSI Afterburner does not let me OC my gpus. Does anyone know a quick fix for this? I'm getting 112 MH/s with 6 rx 570, which is pretty good for stock, but I want to OC it

download afterburner 4.4 beta 15 or newer

[h311m4n]

Tried it for SIGT on a 470 rig. Some cards get up to 16MH/s (core at 1100) with ETH settings, not bad. However some cards just never seem to get initialized properly and get stuck at 4MH/s or even worse 90KH/s. On this particular RIG, I have 3 different memory brands (hynix, elpida and samsung) so maybe something's "f'ed" somewhere...