-

[gpudude]

Hello

How does this pool work? I have been mining for 30 mins with over 600 accepted shares but I don't see my miner under the stats? WZ1v5x9EcfXeodk5nN2HWYeBfGVAfAF3vT

Thank you

Hi mrvegad,

You must be connected at least 1 hour to the pool (ideally 3+) to start receiving payouts due to the nature of p2pool.

Check in around 1.5 hours time and you should start to see payouts begin.

Thanks

Thank you for the quick reply!

No problem.

Further optimisation applied.

[MikeyNick]

Posting over here now. Yea, I dunno what was up between 2-3AM EST and why my shares weren't counting, but I'm receiving payments now after mining for about 15 minutes. I also added the +0.00087310 and now the share difficulty is 57 which seems much more manageable. Will update again in a few hours.

[MobGod]

 Hello gpudude  would you mind sharing your pool I  would like to run p2pool  on my own server  if you don't mind

[gpudude]

Slight increase to 130MH/s, still room for more people!

Point your miners here!

[tyler26]

Slight increase to 130MH/s, still room for more people!

Point your miners here!

All I get is "detected new block," is that normal?

[gpudude]

Slight increase to 130MH/s, still room for more people!

Point your miners here!

All I get is "detected new block," is that normal?

How long have you been connected to the pool? Also what settings are you using?

[tyler26]

Slight increase to 130MH/s, still room for more people!

Point your miners here!

All I get is "detected new block," is that normal?

How long have you been connected to the pool? Also what settings are you using?

I was connected for about 25 minutes. Yesterday, I was connected for a while, maybe ~45 mins-1hr, I didn't get anything.

I have tried stratum and no stratum.

cgminer.exe --scrypt -s 1 --expiry 1 --queue 0 -o http://212.48.67.50:8336 -u MyAddress+0.00116414 -p X  --worksize 158  --thread-concurrency 1600  --lookup-gap 2 -g 2 -I 19

[gpudude]

Settings look fine, wait around 1-1.5 hours and see if payments get processed.  You must stay at least 1 hour on the pool, ideally 3+ to start receiving stable payouts.

Also, try Stratum - it is much better.  Keep me updated.

[MikeyNick]

Well, it's been quite a few hours now, and things are working excellently for me now. I ended up using the 1000kh setting (making shares of diff 76) and i'm getting good payouts frequently. Looks like I found my pool!

[gpudude]

Well, it's been quite a few hours now, and things are working excellently for me now. I ended up using the 1000kh setting (making shares of diff 76) and i'm getting good payouts frequently. Looks like I found my pool!

Awesome news! Glad you are liking it Spread the word 

[gpudude]

DDOS @ This time.

/!\ Update /!\ Pool Status: Running.

[davidcq]

Why I got error message:  pool 0 JSON stratum auth failed: <unkown reason> again and again. my setting is below since I got two 7950s running with 1240kH/s totally.

   {
      "url" : "stratum+tcp://212.48.67.50:8336",
      "user" : "WQWSQWUyaFsyP3uJ7vCmBDUT6exGhqBNFa+0.00116414",
      "pass" : "x"
   },

[davidcq]

Why I got error message:  pool 0 JSON stratum auth failed: <unkown reason> again and again. my setting is below since I got two 7950s running with 1240kH/s totally.

   {
      "url" : "stratum+tcp://212.48.67.50:8336",
      "user" : "WQWSQWUyaFsyP3uJ7vCmBDUT6exGhqBNFa+0.00116414",
      "pass" : "x"
   },

It is connected now, but all shares are rejected, if it is normal when connected to p2pool in the begining?

[gpudude]

Why I got error message:  pool 0 JSON stratum auth failed: <unkown reason> again and again. my setting is below since I got two 7950s running with 1240kH/s totally.

   {
      "url" : "stratum+tcp://212.48.67.50:8336",
      "user" : "WQWSQWUyaFsyP3uJ7vCmBDUT6exGhqBNFa+0.00116414",
      "pass" : "x"
   },

It is connected now, but all shares are rejected, if it is normal when connected to p2pool in the begining?

Hi,

No that's not normal. This means you need to tweak your miner config (intensity etc).

[snaidervp]

when diff recalculates again?

[davidcq]

Why I got error message:  pool 0 JSON stratum auth failed: <unkown reason> again and again. my setting is below since I got two 7950s running with 1240kH/s totally.

   {
      "url" : "stratum+tcp://212.48.67.50:8336",
      "user" : "WQWSQWUyaFsyP3uJ7vCmBDUT6exGhqBNFa+0.00116414",
      "pass" : "x"
   },

It is connected now, but all shares are rejected, if it is normal when connected to p2pool in the begining?

Hi,

No that's not normal. This means you need to tweak your miner config (intensity etc).

I changed the cgminer config and restarted it. But got error pool 0 JSON stratum auth failed: <unkown reason> gain.

[gpudude]

Why I got error message:  pool 0 JSON stratum auth failed: <unkown reason> again and again. my setting is below since I got two 7950s running with 1240kH/s totally.

   {
      "url" : "stratum+tcp://212.48.67.50:8336",
      "user" : "WQWSQWUyaFsyP3uJ7vCmBDUT6exGhqBNFa+0.00116414",
      "pass" : "x"
   },

It is connected now, but all shares are rejected, if it is normal when connected to p2pool in the begining?

Hi,

No that's not normal. This means you need to tweak your miner config (intensity etc).

I changed the cgminer config and restarted it. But got error pool 0 JSON stratum auth failed: <unkown reason> gain.

Not sure why, pool is operating fine. Perhaps try another miner program.

Remember the settings in the original post are basic, and need to be competed by following mining connecting guides.

[thisnewcoin]

I sometimes get this too, just try another pool

[TempleGuard]

Do I need to wait the 1-3 hours every time I reconnect to the pool?

What happens to my accepted shares from the first hours of mining?

[thisnewcoin]

some pools seem constantly DDoS'ed sucks