[ANN][CHIPS] KMD platform's LN app with realtime betting+decentralized shuffling

[jl777B]

Code:

computergenie@miningVM:~/Desktop/linux-x64$ ldd ./chips-qt
./chips-qt: /usr/lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by ./chips-qt)

No love for Debian 8 folks 

on unix you should be able to build qt on debian

[Decker]

Code:

computergenie@miningVM:~/Desktop/linux-x64$ ldd ./chips-qt
./chips-qt: /usr/lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by ./chips-qt)

No love for Debian 8 folks  

For Linux - easiest and right way is building from sources:

Code:

git clone https://github.com/DeckerSU/chips3/ -b dev-decker
cd chips3
./autogen.sh
./configure
make

Also, you may need to install additional dependencies.

[ComputerGenie]

LOL I know how to build it. I just can't help myself from commenting on pre-compiles that are pretty much for Ubuntu (and similar) being listed as the generic (rather than specific).  

[a007mr]

Blockchain in the betting is really cool idea. It give more transparency and confidence.

[okie dokie]

I like the binaries. Block chain downloaded in about a half hour if I remember.

Thanks decker! Good job.

[kabi123]

ok, coinexchange.io really su.k, 12 hour pending withdraws...hm, maybe they donthave enough BTC in hot wallet or i dontknow, but this really su.k
first time that i get this problem.... never happened on cryptopia or nova hmmmmm :-(

[DigeNarrator]

ok, coinexchange.io really su.k, 12 hour pending withdraws...hm, maybe they donthave enough BTC in hot wallet or i dontknow, but this really su.k
first time that i get this problem.... never happened on cryptopia or nova hmmmmm :-(

i did not have issues with withdraws from coinexchange

[kabi123]

and from now... only 12.5 chips per block....hm ugly surprise hehe P

[kurbeks]

Should mention in OP msg that halving is every 210k blocks.

[ComputerGenie]

and from now... only 12.5 chips per block....hm ugly surprise hehe P

Not sure how halvings are a "surprise".

Should mention in OP msg that halving is every 210k blocks.

You mean like:

...fork of BTC 0.14...

[kurbeks]

Too hard for peasants to understand Can't know halving of every coin out there.

[boacw]

I compiled chipsd on Debian 9 and, because I looked for this before and didn't find, I'm writing this message.
Is there a wiki I can contribute to to write the steps I followed?

[ComputerGenie]

Too hard for peasants to understand Can't know halving of every coin out there.

smfh 

[jl777B]

I compiled chipsd on Debian 9 and, because I looked for this before and didn't find, I'm writing this message.
Is there a wiki I can contribute to to write the steps I followed?

that's great!

for now, just post here so we have the info for when we make wiki

[boacw]

I compiled chipsd on Debian 9 and, because I looked for this before and didn't find, I'm writing this message.
Is there a wiki I can contribute to to write the steps I followed?

that's great!
for now, just post here so we have the info for when we make wiki

These steps only build the headless version (chips-cli, chipsd...), not QT version!
I didn't verified what dependency it needs to. If you want to build QT version, don't put the "--with-gui=no" parameter at the end of these steps.

• sudo apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev
• git clone https://github.com/jl777/chips3
• cd chips3

Install Berkeley DB 4.8 from source:

• BITCOIN_ROOT=$(pwd)
• BDB_PREFIX="${BITCOIN_ROOT}/db4"
• mkdir -p $BDB_PREFIX
• wget 'http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz'
• echo '12edc0df75bf9abd7f82f821795bcee50f42cb2e5f76a6a281b85732798364ef  db-4.8.30.NC.tar.gz' | sha256sum -c
  (it should display it succeeded)
• tar -xzvf db-4.8.30.NC.tar.gz
• cd db-4.8.30.NC/build_unix/
• ../dist/configure --enable-cxx --disable-shared --with-pic --prefix=$BDB_PREFIX
• make install

Continue with chips:

• cd $BITCOIN_ROOT
• ./autogen.sh
• ./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" --with-gui=no
• make
• ./chipsd -addnode=5.9.253.195

[jl777B]

I compiled chipsd on Debian 9 and, because I looked for this before and didn't find, I'm writing this message.
Is there a wiki I can contribute to to write the steps I followed?

that's great!
for now, just post here so we have the info for when we make wiki

These steps only build the headless version (chips-cli, chipsd...), not QT version!
I didn't verified what dependency it needs to. If you want to build QT version, don't put the "--with-gui=no" parameter at the end of these steps.

• sudo apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev
• git clone https://github.com/jl777/chips3
• cd chips3

Install Berkeley DB 4.8 from source:

• BITCOIN_ROOT=$(pwd)
• BDB_PREFIX="${BITCOIN_ROOT}/db4"
• mkdir -p $BDB_PREFIX
• wget 'http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz'
• echo '12edc0df75bf9abd7f82f821795bcee50f42cb2e5f76a6a281b85732798364ef  db-4.8.30.NC.tar.gz' | sha256sum -c
  (it should display it succeeded)
• tar -xzvf db-4.8.30.NC.tar.gz
• cd db-4.8.30.NC/build_unix/
• ../dist/configure --enable-cxx --disable-shared --with-pic --prefix=$BDB_PREFIX
• make install

Continue with chips:

• cd $BITCOIN_ROOT
• ./autogen.sh
• ./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" --with-gui=no
• make
• ./chipsd -addnode=5.9.253.195

thank you! PM me your CHIPS address and I will send you a 777 CHIPS tip

[boacw]

I compiled chipsd on Debian 9 and, because I looked for this before and didn't find, I'm writing this message.
Is there a wiki I can contribute to to write the steps I followed?

that's great!
for now, just post here so we have the info for when we make wiki

These steps only build the headless version (chips-cli, chipsd...), not QT version!
I didn't verified what dependency it needs to. If you want to build QT version, don't put the "--with-gui=no" parameter at the end of these steps.

• sudo apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev
• git clone https://github.com/jl777/chips3
• cd chips3

Install Berkeley DB 4.8 from source:

• BITCOIN_ROOT=$(pwd)
• BDB_PREFIX="${BITCOIN_ROOT}/db4"
• mkdir -p $BDB_PREFIX
• wget 'http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz'
• echo '12edc0df75bf9abd7f82f821795bcee50f42cb2e5f76a6a281b85732798364ef  db-4.8.30.NC.tar.gz' | sha256sum -c
  (it should display it succeeded)
• tar -xzvf db-4.8.30.NC.tar.gz
• cd db-4.8.30.NC/build_unix/
• ../dist/configure --enable-cxx --disable-shared --with-pic --prefix=$BDB_PREFIX
• make install

Continue with chips:

• cd $BITCOIN_ROOT
• ./autogen.sh
• ./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" --with-gui=no
• make
• ./chipsd -addnode=5.9.253.195

I try to compile it on Debian 8 (Jessie) to, but I get an error:

Code:

CXX      leveldb/port/leveldb_libleveldb_a-port_posix.o
leveldb/port/port_posix.cc: In function ‘bool leveldb::port::HasAcceleratedCRC32C()’:
leveldb/port/port_posix.cc:60:15: warning: ‘ecx’ may be used uninitialized in this function [-Wmaybe-uninitialized]
   return (ecx & (1 << 20)) != 0;
               ^
  AR       leveldb/libleveldb.a
  CXX      leveldb/port/leveldb_libleveldb_sse42_a-port_posix_sse.o
  AR       leveldb/libleveldb_sse42.a
  CXX      leveldb/helpers/memenv/leveldb_libmemenv_a-memenv.o
  AR       leveldb/libmemenv.a
  CXXLD    chipsd
libbitcoin_util.a(libbitcoin_util_a-util.o): In function `GetNumCores()':
/home/xxxxx/chips3/src/util.cpp:883: undefined reference to `boost::thread::physical_concurrency()'
libbitcoin_util.a(libbitcoin_util_a-utiltime.o): In function `sleep':
/usr/local/include/boost/thread/pthread/thread_data.hpp:278: undefined reference to `boost::this_thread::hidden::sleep_until(timespec const&)'
libbitcoin_wallet.a(libbitcoin_wallet_a-db.o): In function `copy_file':
/usr/local/include/boost/filesystem/operations.hpp:539: undefined reference to `boost::filesystem::detail::copy_file(boost::filesystem::path const&, boost::filesystem::path const&, boost::filesystem::detail::copy_option, boost::system::error_code*)'
collect2: error: ld returned 1 exit status
Makefile:3601: recipe for target 'chipsd' failed
make[2]: *** [chipsd] Error 1
make[2]: Leaving directory '/home/xxxxx/chips3/src'
Makefile:9242: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/xxxxx/chips3/src'
Makefile:728: recipe for target 'all-recursive' failed
make: *** [all-recursive] Error 1

[ComputerGenie]

...
I try to compile it on Debian 8 (Jessie) to, but I get an error:
...

For 8 and earlier, follow the directions in YourPath/chips3/doc/build-unix.md
 

[Metaphilibert]

...
Install Berkeley DB 4.8 from source:

• BITCOIN_ROOT=$(pwd)
• BDB_PREFIX="${BITCOIN_ROOT}/db4"
• mkdir -p $BDB_PREFIX
• wget 'http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz'
• echo '12edc0df75bf9abd7f82f821795bcee50f42cb2e5f76a6a281b85732798364ef  db-4.8.30.NC.tar.gz' | sha256sum -c
  (it should display it succeeded)
• tar -xzvf db-4.8.30.NC.tar.gz
• cd db-4.8.30.NC/build_unix/
• ../dist/configure --enable-cxx --disable-shared --with-pic --prefix=$BDB_PREFIX
• make install

...

if you don't want to bother with the berkeley db 4.8 installation, you can also ignore it by using
./configure --with-incompatible-bdb
when building chipsd

Berkeley DB version only matters if you want to have cross client wallet compatible
 (a wallet created with a client that was build on 4.8 may not be usable with a client that was build on another version of bdb)

So if you extracted your privkeys and not planning to copy the wallet.dat for use with another client, you can ignore the dbd version 4.8 and use the version currently installed on your system

[boacw]

...
Install Berkeley DB 4.8 from source:

• BITCOIN_ROOT=$(pwd)
• BDB_PREFIX="${BITCOIN_ROOT}/db4"
• mkdir -p $BDB_PREFIX
• wget 'http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz'
• echo '12edc0df75bf9abd7f82f821795bcee50f42cb2e5f76a6a281b85732798364ef  db-4.8.30.NC.tar.gz' | sha256sum -c
  (it should display it succeeded)
• tar -xzvf db-4.8.30.NC.tar.gz
• cd db-4.8.30.NC/build_unix/
• ../dist/configure --enable-cxx --disable-shared --with-pic --prefix=$BDB_PREFIX
• make install

...

if you don't want to bother with the berkeley db 4.8 installation, you can also ignore it by using
./configure --with-incompatible-bdb
when building chipsd

Berkeley DB version only matters if you want to have cross client wallet compatible
 (a wallet created with a client that was build on 4.8 may not be usable with a client that was build on another version of bdb)

So if you extracted your privkeys and not planning to copy the wallet.dat for use with another client, you can ignore the dbd version 4.8 and use the version currently installed on your system

Thanks for this precision.
I prefer to be able to use my wallet.dat with any computer (vps, nas, home computer), and therefore, I try to always compile the same way.