100 dollars in btc for helping me get my BCH

[Roccker]

Hi there!

I would like to give 100 Dollars in Bitcoin for whoever that gives me tips and I do what you say and i get my BCC out of this address into an exchange.

I already tried these:

A.

1. I open Electrum bitcoin-Wallet (with 2FA from trustcoin) and look at the adresses
2. I look up the one adress in Blockdozer / Blockchair and it tells me that my BCC are there – so I have public and private key
3. I create Coinomi BCC Wallet
4. I click ‘receive coins from paper wallet’
5. I scan the Electrum private-key-Picture from the adress where my Blockdozer shows my BCC are -> I check, yes, the picture gave the correct private key
5. Coinomi says 'there are no funds on this private key'

B.

1. Look up public key on blockchair: my bcc are on there
2. Look up the seed of my Electrum BTC Wallet (2FA with trustedcoin)
3. Open up ElectrumCash 2.9.2.
New/Restore, standard wallet, 'restore seed', enter seed words + under options check bip39
Server is electroncash.cascharia.com
4. It says balance is 0 bcc (i look up on blockchair: bcc are still there)

I have public and private keys, can i get my bcc?

[ruclassic]

Hi there!

I would like to give 100 Dollars in Bitcoin for whoever that gives me tips and I do what you say and i get my BCC out of this address into an exchange.

I already tried these:

A.

1. I open Electrum bitcoin-Wallet (with 2FA from trustcoin) and look at the adresses
2. I look up the one adress in Blockdozer / Blockchair and it tells me that my BCC are there – so I have public and private key
3. I create Coinomi BCC Wallet
4. I click ‘receive coins from paper wallet’
5. I scan the Electrum private-key-Picture from the adress where my Blockdozer shows my BCC are -> I check, yes, the picture gave the correct private key
5. Coinomi says 'there are no funds on this private key'

B.

1. Look up public key on blockchair: my bcc are on there
2. Look up the seed of my Electrum BTC Wallet (2FA with trustedcoin)
3. Open up ElectrumCash 2.9.2.
New/Restore, standard wallet, 'restore seed', enter seed words + under options check bip39
Server is electroncash.cascharia.com
4. It says balance is 0 bcc (i look up on blockchair: bcc are still there)

I have public and private keys, can i get my bcc?

You have done correct work on your Tried (A).
I thought problem is that you have made a transaction after 1st August.
If you made a transaction after 1st August then i can help you better just PM me.

[BitWhale]

Be very careful dealing with someone in PM especially in regards to your private keys. Do not under any circumstances give those away. You probably already know this, but in the off chance you don't... You will lose everything if you give away your private keys. Imo, there's no reason why you can't solve this problem here in public.

I'm surprised no one has chimed in to help you, I did my split through Ledger, so I don't have the knowledge to give. I wish you the best of luck!

[Justaguy2]

Easy go to https://blockchain.info make an account, input private key and boom!

[BitcoinReseller]

check out this tutorial :
https://bitcointalk.org/index.php?topic=2078292.0

[Roccker]

Easy go to https://blockchain.info make an account, input private key and boom!

But that is a bitcoin wallet, not a BitcoinCash wallet?!

I try to get my BCH

[styca]

You might just have to wait a while for the funds to show up.
I haven't moved any bch myself, but as far as I'm aware it's very slow.

Otherwise it could be a case of contacting Coinomi support.

There is some info on this page: https://coinomi.freshdesk.com/support/solutions/articles/29000013507-bitcoin-cash-claims-identify-your-case

"- I sweeped ("imported") a BTC private key from another wallet or paper wallet, that contained BTC before the fork. I did the sweep AFTER the fork.
This means that at the time of the fork, when the split happened, your BTC were still in that original BTC address, and not in Coinomi. Therefore, it was split to the equivalent BCH address, which is not a Coinomi address.
For example, this BTC address contained some BTC prior to the fork:
https://blockchain.info/address/16CjpzQFJri3hZdr9KrSe8k6ydFZE676QC
At the fork, the forked BCH can be seen in the excact same address in the BCH explorer:
http://blockdozer.com/insight/address/16CjpzQFJri3hZdr9KrSe8k6ydFZE676QC
Sweeping a wallet creates a send transaction that empties the source wallet and transfers the funds to the destination wallet. A sweep of the afformentioned address after the fork, will empty the BTC address and send the funds to a totally different Coinomi BTC address. This is a new address did not contain BTC during the fork. Therefore the normal split inside Coinomi following our instructions will not work.
Relax! Both your BTC (safe in a Coinomi address now) and your BCH are safe and accessible.
First confirm this is the case by going to http://blockdozer.com/insight/ and entering the original BTC address in the end of this link, as in the example above. If you do see your forked coins in the blockdozer explorer, do the following:
Create a BCH wallet in Coinomi. You don't have to manually change the BCH path.
From the BCH wallet main page, sweep the same private key as the BTC one you sweeped before.
You now should have both your BTC (your original sweep) and your BCH in Coinomi. Please note that the BCH network is growing still and there are not many blocks being mined, making delays expected.

- I have created a BCH wallet and sweeped a BTC wallet that was funded before the fork into my BCH Coinomi wallet. I don't see the funds.
You should sweep it into BTC in coinomi, not BCH. First, go to your BTC overview tab, and sweep the BTC key into your BTC wallet by clicking on .../Sweep Wallet. Then, long-press your created BCH wallet from your overview tab and click on the trash icon to delete it. Then follow these instructions to add a BCH wallet correctly and you will automatically see your BCH equivalent for the sweeped BTC wallet.
"

[Roccker]

100 dollars who can help me get my BCH:

Did it like here: https://bitcointalk.org/index.php?topic=2078292.0
1. Looked at blockchair – yes, all BCC are on the address
2. Opened ElectrumCash 2.9.2, made a new standard wallet
3. Went to Wallet, private keys, sweep and put in private key
(in Electrum before I rightclicked the address where my BCC are - as blockchair shows - and picked ‘show private keys’ and copied that)
4. It says ‘No inputs found’ in ElectrumCash

Argh. What the hell.
What could be wrong here.

The original Electrum Bitcoin Wallet, that now ‘has’ my BCH was with ‘2FA from Trustedcoin’ – can this fuck this all up?

What else could be wrong – wrong private key.
Ok, I open Electrum again, open my Bitcoin wallet that had input of Bitcoin at 2017-07-31 17h and output of bitcoin at 2017-08-02. Go to ‘adresses’. Go to the one where Blockchair shows all my BCH are. Right click ‘private key’. Enter password. Check the private key again – it’s the right one.

The point in ElectrumCash is green and 479 723 blocks. Connected to 10 nodes, Server electroncash.casharia.com.,

If I have the public key and the private key, is the fact that the Bitcoin Wallet is with ‘2FA from trustedcoin’ relevant? I guess it has to be, it’s the only point of failure I see right now?

[escrow.ms]

You need to tell which electrum wallet you are using for bitcoin and with what settings? and please post your bitcoin address where your bitcoins are stored or were stored.

Ps: Do you have electrum seed ? (Bitcoin wallet)

[Roccker]

Thanks styca

I did this again right now, 'sweep paper wallet' - and it says right after 1 second 'this private key contains no funds'
A.

1. I open Electrum bitcoin-Wallet (with 2FA from trustcoin) and look at the adresses
2. I look up the one adress in Blockdozer / Blockchair and it tells me that my BCC are there – so I have public and private key
3. I create Coinomi BCC Wallet
4. I click ‘receive coins from paper wallet’
5. I scan the Electrum private-key-Picture from the adress where my Blockdozer shows my BCC are -> I check, yes, the picture gave the correct private key
5. Coinomi says 'there are no funds on this private key'

[Roccker]

You need to tell which electrum wallet you are using for bitcoin and with what settings? and please post your bitcoin address where your bitcoins are stored or were stored.
Ps: Do you have electrum seed ? (Bitcoin wallet)

- I used:
Electrum 2.9.2 till today, today i used Electrum 2.9.3
ElectronCash 2.9.2

- Here the public bitcoin key:
https://blockchair.com/bitcoin/address/33NMmKAPs3vUojeAWk13ZzXVAojrR7rFQS

Here the public bitcoinCash key:
https://blockchair.com/bitcoin-cash/address/33NMmKAPs3vUojeAWk13ZzXVAojrR7rFQS

- I have all seeds of all wallets



ps thanks BitWhale too


---

I did also try this:

1. Open ElectrumCash, make new wallet
2. Restore 'use public or private keys' and put in private key
(the one where i first check blockchair of public key, then go to electrum wallet
and get private key of this public key where the bcc show up)
3. It shows 0 BCC

[Roccker]

Thanks

Now what you should try is, Download Coinomi wallet on your phone,make a wallet, select "bitcoincash"  and sweep that private key (For sweep option click on three dots on the right corner)

I did this again right now, 'sweep paper wallet' - and it says right after 1 second 'this private key contains no funds'

A.
1. I open Electrum bitcoin-Wallet (with 2FA from trustcoin) and look at the adresses
2. I look up the one adress in Blockdozer / Blockchair and it tells me that my BCC are there – so I have public and private key
3. I create Coinomi BCC Wallet
4. I click ‘receive coins from paper wallet’
5. I scan the Electrum private-key-Picture from the adress where my Blockdozer shows my BCC are -> I check, yes, the picture gave the correct private key
5. Coinomi says 'there are no funds on this private key'

I might have found your problem, electron cash does not supports Multisig addresses (That starts with "3" Instead of "1" completely.)
https://twitter.com/ElectrumWallet/status/892731209259864064

And coinomi does?

[NorrisK]

I think you can be happy that you haven't been able to access them yet. Otherwise you may have sold them at 300 usd

Anyway, those guides should work. Be very careful with clicking on peoples links and never give out any info if a service asks for that. It's not required.

[escrow.ms]

1.Open up ElectrumCash 2.9.2 (Make sure you have latest version)
2.Click on New/Restore
3.Select wallet with two-factor authentication and click Next
4.Select I already have a seed and click "Next"
5.Enter your Electrum wallet seed and click Next
6.Select disable and click next
7.Enter password and click next and check if it's showing balance and try to spend it.

If this doesn't works follow the same process again but this time select "keep" option when it asks you about trustedcoin multisig.

1.Open up ElectrumCash 2.9.2
2.Click on New/Restore
3.Select wallet with two-factor authentication and click Next
4.Select I already have a seed and click "Next"
5.Enter your Electrum wallet seed and click Next
6.Select keep and click next
7.Enter password and click next
8.enter your email id for trusted coin 2FA, Scan 2FA QR on google auth and enter code.
9. Enter password and click next and check if it's showing balance and try to spend it using New Trusted coin 2FA.

[Roccker]

1.Open up ElectrumCash 2.9.2 (Make sure you have latest version)
2.Click on New/Restore
3.Select wallet with two-factor authentication and click Next
4.Select I already have a seed and click "Next"
5.Enter your Electrum wallet seed and click Next
6.Select disable and click next
7.Enter password and click next and check if it's showing balance and try to spend it.

Fucking Yes!
It worked!

Please let me know your public adress, happy to send you the 0.025 btc

[escrow.ms]

Fucking Yes!
It worked!

Please let me know your public adress, happy to send you the 0.025 btc

1nPfxnncZqWvVP4UHT6XLfNzfaik7akQS

Thank you so much and I'm glad it worked. You were creating a "standard wallet" before that's why it wasn't working.


Edit: Thank you OP, Received your tip. I really appreciate it.

[escrow.ms]

I think you can be happy that you haven't been able to access them yet. Otherwise you may have sold them at 300 usd

Yes, in my opinion whatever happens, happens for a reason.

[iqlimasyadiqa]

1.Open up ElectrumCash 2.9.2 (Make sure you have latest version)
2.Click on New/Restore
3.Select wallet with two-factor authentication and click Next
4.Select I already have a seed and click "Next"
5.Enter your Electrum wallet seed and click Next
6.Select disable and click next
7.Enter password and click next and check if it's showing balance and try to spend it.

If this doesn't works follow the same process again but this time select "keep" option when it asks you about trustedcoin multisig.

1.Open up ElectrumCash 2.9.2
2.Click on New/Restore
3.Select wallet with two-factor authentication and click Next
4.Select I already have a seed and click "Next"
5.Enter your Electrum wallet seed and click Next
6.Select keep and click next
7.Enter password and click next
8.enter your email id for trusted coin 2FA, Scan 2FA QR on google auth and enter code.
9. Enter password and click next and check if it's showing balance and try to spend it using New Trusted coin 2FA.

Until now I still can not do claim BCH, many say that it is very dangerous for our wallet. I will try what you suggest and i will give report what happened. If it works I will give you a little tip. thanks . Hopefully it runs smoothly because I save enough BCH that can not be claimed.

[Greg M]

  Have you had any luck? I'd love to help but I am also a ledger user. I strongly suggest for the future using a ledger blue or ledger nano s as the split was super easy and there will most likely be another in the next few months.

  Good luck. Wish you the best at unlocking your BCH